
ロケットバッテリー 2YBD-91041
2YBD-91041はRocketの正規製品モデルではありません. 自動車メーカーによって割り当てられた OEM 部品番号です。 (ヒュンダイ用OE部品 / 来て). Rocket のネイティブ モデルの指定は SMF に準拠しています / EFB / AGMシリーズ (例えば. 80D26L, 110D31L). 2YBD マークは、自動車メーカーの供給システム内でスペアパーツを識別できるようにバッテリー ラベルに印刷されています。.
ブランド概要
ロケット (セバンバッテリー, 韓国)
Rocket は韓国で最も売れている自動車用バッテリー ブランドであり、ヒュンダイと起亜自動車の OEM サプライヤーです。. その製品ポートフォリオは 3 つの主要なラインに分かれています:
- SMF メンテナンスフリーのカルシウム鉛 バッテリー: アイドリングストップのない従来型ガソリン車用.
- EFB 強化浸水バッテリー: ISGオートアイドリングストップ搭載ガソリン車用.
- AGM 吸収ガラスマットバッテリー: アイドリングストップシステム搭載車およびプレミアムモデル向け.
Key technical features: Lead-calcium alloy grids, low self-discharge, built-in flame-arrest safety valves, built-in hydrometer state-of-charge indicator, and high vibration resistance for harsh on-board operating conditions.
Identification Notes for 2YBD-91041
- カテゴリ: 12V automotive starting battery, OEM manufactured by Rocket for Hyundai / 来て
- Code breakdown: 2YBD = production batch & OEM allocation code; 91041 = automaker material spare part number
- Common specifications for 2YBD-series batteries
電圧: 12V
タイプ: SMF maintenance-free / EFB for start-stop (depends on vehicle ISG configuration)
Typical capacity: 70ああ / 80ああ, CCA cold cranking current: 600~700A
Enclosure standard: JIS Japanese/Korean case (mostly D26 footprint)
⚠️ Multiple capacity variants exist under this single OEM part number. Ah rating, CCA, terminal polarity and physical dimensions must be verified from the printed label on the battery itself. The part number alone cannot confirm the exact capacity.
選択 & 交換ガイドライン
- Four core parameters to verify before replacement: 定格容量 (ああ), CCA cold cranking amps, positive/negative terminal polarity, case length × width × height
- For start-stop vehicles: Never replace EFB/AGM batteries with ordinary SMF batteries, otherwise service life will be drastically shortened.
- Domestic alternative brands: Camel, Varta, Sail. Imported alternatives: AtlasBX, GS Yuasa.
メンテナンス & トラブルシューティング
Float voltage: 12.6~12.8V at rest; charging voltage 14.2~14.7V
ストレージ: Store at ambient temperature; recharge monthly. Self-discharge rate approx. 3% per month.
一般的な障害:
- Open-circuit voltage <12.2V: Battery discharged. Equalization charging required. Repeated deep discharge causes irreversible sulfation.
- Voltage drops below 9.5V during cranking: High internal resistance due to aging, battery replacement recommended.
- Case bulging or electrolyte leakage: すぐにサービスから削除してください. 充電しないでください.
外国貿易手数料.
外国貿易に関する参考資料 (HSコード)
自動車用鉛蓄電池: 85071000
おすすめ: 物理バッテリーをお持ちの場合, 印刷したAhを送信します, CCA, ラベルの寸法とEFB/SMFマーク. 正確な仕様を確認できます, 交換モデルを照合し、充電器パラメータを推奨します.
あなたの車両が2YBD-91041と互換性があるかどうかを確認する方法 (ロケットOEMバッテリー)
重要な注意事項: 2YBD-91041 は、ヒュンダイ/キア OEM スペア部品番号です。, 独立した性能仕様ではない. 一部のヒュンダイおよび起亜モデルにのみ工場で取り付けられています。. 他のすべての車両ブランドの場合, この部品番号だけでは互換性を判断できません. 取り付けには以下の 5 つの基準をすべて満たす必要があります.
- 車両メーカーの確認 (最優先)
✅ ヒュンダイのみ / 起亜自動車はこの OEM 部品の潜在的な候補です.
❌ VWの車両, トヨタ, ホンダ, ビュイックおよびその他のブランドは直ちに除外されます.
正確な検証: VINを提供してください (車両識別番号) ヒュンダイ/起亜 EPC スペアパーツ システムに問い合わせて、2YBD-91041 が元のバッテリー部品番号としてリストされているかどうかを確認します。.
- バッテリーテクノロジーのタイプを確認する (アイドリングストップ車にとって最も重要な要素)
- ISGオートスタートストップ搭載車の場合: 元のバッテリーはEFBである必要があります. 交換に使用する 2YBD-91041 ユニットも EFB である必要があります. 通常のSMFメンテナンスフリーバッテリーを代替品として使用しないでください。, それ以外の場合は早期に失敗します, スタート/ストップが無効になり、DTC 障害コードが発生します。.
- オートスタート/ストップ機能がない車両の場合: 対応する 2YBD-91041 バリアントは、標準の SMF メンテナンス不要の鉛酸バッテリーです.
⚠️ダウングレードはできません: もともと AGM バッテリーが装備されている車両は、この 2YBD-91041 を直接使用することはできません。 (この OEM 番号には AGM バージョンがありません).
- 電気的パラメータのチェック (OEM の最小要件を満たすか超える必要があります)
2YBD-91041 バッテリーの印刷ラベルを確認してください。:
- 電圧: 12V (一致する必要があります)
- 定格容量Ah: ≥ 元のバッテリー Ah
- CCA cold cranking amps: ≥ 純正バッテリー CCA (SAE規格)
わずかに高い Ah/CCA は許容されます, ただし、OEM 仕様よりも低い定格のバッテリーは使用しないでください。, そうしないと、コールドクランキングが困難になり、電力供給が不十分になります。.
- 身体的なフィット感: ケース寸法 + 端子極性
- アウターケースの長さ/幅/高さは元のバッテリーと一致する必要があります. バッテリートレイとホールドダウンクランプで正しく固定する必要があります, バッテリーを圧迫せずにボンネットを閉める必要があります.
- プラス/マイナス端子位置 (左プラス / 右ポジティブ) 元のバッテリーと同一である必要があります.
- 端子形状: 韓国/日本車用JIS太ポスト端子; ワイヤーハーネスは引っ張ったり引っ張ったりせずに接続する必要があります.
- インストール後の手順 (BMS バッテリー管理を備えたヒュンダイ/キア)
アイドリングストップ機能を備えた新しいヒュンダイ/キア車用, バッテリーの登録は、交換後に診断スキャナーを介して実行する必要があります. これにより、ECU が新しいバッテリーパラメータを認識できるようになります。. 登録なし, 異常な充電方法はバッテリーの早期劣化を引き起こす可能性があります.
簡単な互換性チェックリスト (すべての項目にチェックマークが付いている = 互換性がある)
車両はヒュンダイです / 来て
車両のアイドリングストップ構成はバッテリーの種類と一致します (SMF / EFB) 2YBD-91041の
Ah および CCA ≥ 元のバッテリー定格
ケースの寸法と端子の極性は物理的な取り付けに一致します
診断ツールでバッテリーBMS登録が可能
3 迅速な検証方法
- 古いバッテリーのラベルを点検する: 元のバッテリーラベルに 2YBD-91041 と印刷されている場合, 直接互換性があります.
- 取扱説明書を確認する: 工場出荷時の仕様については、バッテリーのセクションを参照してください。.
- VINルックアップ: OEM バッテリーの部品番号を確認するには、VIN をヒュンダイ/キア スペアパーツ システムに提出してください。.
補足事項
同じ 2YBD-91041 部品番号には 2 つの容量バリエーションが存在します。: 70ああ / 80ああ. 部品番号だけでは容量はわかりません. ご注文前に必ずバッテリーのラベルで仕様をご確認ください。.
ヒュンダイ フォークリフト 2YBD-91041 (韓国のロケット牽引バッテリー)
応用: ヒュンダイ電動カウンターバランスフォークリフト. 2YBD-91041 はヒュンダイ OEM 部品番号です. バッテリーのブランド: ロケット (韓国のロケット牽引用鉛蓄電池).
全体の寸法: L985mm×W536mm×H745mm (バッテリーコンテナの高さを含む)
- 基本仕様
- 電圧: 48V (ヒュンダイ 25/30/32/35B-9U 用共通バッテリーパック)
- 容量: 48V715Ah (5-時間料金 C5)
- 工事: Tubular positive traction lead-acid battery, 24pcs 2V cells connected in series, steel battery container
- 重さ: 約. 3450kg (complete container with electrolyte)
- Dimension confirmation: L985 × W536 × H745mm, outer contour of battery container including terminals and top cover; recommended clearance inside battery compartment: 5~10mm per side
- Applicable Forklift Models
Hyundai electric forklift: 25B-9U, 30B-9U, 32B-9U, 35B-9U (2.5t ~ 3.5t 4-wheel electric counterbalance)
Part No.2YBD-91041 is OEM optional Rocket battery assembly for these models
- Features of Rocket Battery (韓国のロケット牽引バッテリー)
- Tubular plate, deep cycle discharge, suitable for continuous heavy-duty forklift operation. Standard cycle life: 1200~1500 cycles @75% depth of discharge
- Low-antimony grid, low water loss rate, longer maintenance interval
- Korean OEM supporting Hyundai construction machinery, widely used for export equipment
- 定期的に水を補充する浸水式, 定期的に電解液レベルの検査が必要
- 国内代替品の選定指針 (2YBD-91041の代替品)
置き換えのためのコア制約: 外形寸法 985×536×745mm, 48V715Ah, 電池容器の取り付け穴, 接続銅バスバーの位置
- 715Ah 未満の容量は推奨されません, そうしないと作業時間が不十分になります
- 高さ745mmが重要. 同じ容量の多くの国産バッテリーは容器が高く、ヒュンダイのバッテリーコンパートメントには収まりません
- トラクションバッテリーはチューブラートラクションセルを採用する必要があります. 通常のSLIスターターバッテリーは交換できません。
- 取り扱い国内ブランド: トーチ, レオチ, 天能トラクションシリーズ. この寸法に従ってカスタムのバッテリーコンテナアセンブリが利用可能
- メンテナンス & トラブルシューティングのポイント
- 充電: 均等化充電機能を備えた、適合する 48V インテリジェント フォークリフト充電器を使用する. Overcharging prohibited
- Periodic check: Inspect electrolyte level every 10~15 working days, refill deionized water
- 一般的な障害: Weak individual cell, 酸化した & overheated terminals, acid leakage at container bottom
- リフティング: Container equipped with lifting lugs. Special forklift battery hoist must be used during replacement.
- 貿易 / Customs Declaration Reference
Product name: Traction lead-acid battery (forklift battery assembly)
HSコード: 85072000 (Other lead-acid accumulators)
Hyundai Forklift OEM Part No.: 2YBD-91041|Rocket (Korean Rocket) Traction Battery Full Specification
完全な組み立て: 48V715Ah (C5, 5-hour rate), 24pcs 2V tubular traction cells in series, flooded lead-acid battery with water refilling, OEM supporting battery assembly for Hyundai 2.5~3.5 ton electric counterbalance forklift
- Basic Identification Information
- OEM Part Number: 2YBD-91041 (Hyundai forklift spare part number, NOT Rocket cell model number)
- Battery Brand: ROCKETロケットバッテリー (Korean Rocket)
- 電池のタイプ: トラクションバッテリー, フォークリフト用PzS管形鉛蓄電池, バッテリーが始動しない
- Applicable Forklift Models: ヒュンダイ 電動カウンターバランス 25B-9U, 30B-9U, 32B-9U, 35B-9U (2.5t/3.0t/3.2t/3.5t)
- 起源: 韓国 (OEMアセンブリ; 国内での交換は中国製のカスタムバッテリーコンテナアセンブリ可能)
- 物理的寸法 & 重さ (トップカバーを含む完全なバッテリーコンテナ, 端子, リフティングラグ)
全体の寸法: L985mm×W536mm×H745mm (高さには電池コンテナの上部カバーが含まれます, 延長ケーブルコネクタを除く)
湿重量 (電解液を使用して組み立てを完了する): ≈3450kg (±5%の公差)
容器材質: 溶接スチール製バッテリーボックス, リフティングラグを装備, オーバーフローチャネル, 集酸塩基
内部レイアウト: 24個の 2V セルを配置 2 行, 銅バスバーによって直列に接続されている, ポジティブ & マイナス端子が引き出されている; ボックス内の電解液膨張用のスペースを確保
- コアの電気パラメータ
- 公称電圧: 48ワシントンDCで (2Vセル×24本)
- 定格容量: 715ああ@C5 (5-hour rate, 25℃)
- セル電圧: 2セルあたりの V; static open circuit voltage of single cell: 2.08~2.12V
- Cut-off discharge voltage (minimum working voltage for forklift): 42V for whole pack, single cell ≥1.75V (Stop discharging below this value to prevent sulfation and permanent cell damage)
- Standard charging voltage: 58.8~60V (equalization stage); float / maintenance voltage 52.8V
- Standard charging current: 0.1C≈71.5A; Max charging current ≤80A. Must use 3-stage intelligent charger for flooded traction battery
- Continuous discharge: Support 0.5C continuous discharge; short-time peak discharge up to 1C (heavy load lifting)
- Total battery energy: 48V ×715Ah = 34.32 kWh
- Battery Material & Life Index
- Plate construction: Tubular positive plate (PzS), pasted negative plate; low-antimony alloy grid to reduce gassing and water consumption
- Electrolyte: Dilute sulfuric acid. Specific gravity (fully charged @25℃): 1.280 ±0.005 g/cm³; approx.1.12 when fully discharged
- Design cycle life: 1200~1500 cycles @75% DOD (Depth of Discharge); まで 1800+ cycles if daily discharge controlled at 50% DOD
- 使用温度範囲: Discharge -15℃ ~ +50℃; Charging 0℃ ~ +45℃; Optimal working temperature: 20~30℃
- 特性: Deep cycle & 耐振動性; Flooded type requiring regular water refilling, NOT maintenance-free
- インストール, インタフェース & Structure Information
- リフティング: 4 lifting lugs on container. Special battery hoist must be used for replacement. Do not lift by cables directly
- 端子: Heavy-duty copper terminals fixed by M10/M12 bolts; copper busbars supplied from factory, anti-oxidation grease applied on terminals
- ケーブル差込口: Cable exit on one end of battery box; fixed distance between positive and negative terminals matching original wiring position of Hyundai battery compartment
- Compartment clearance: 5~10mm clearance per side inside forklift compartment. For domestic replacement, L/W/H dimension must be strictly controlled, height 745mm is hard limit
- 換気: Vent caps fitted on battery box to vent hydrogen during charging. Charging area must be well ventilated, open flame strictly prohibited
- Routine Maintenance Standard
- Refill medium: Distilled / deionized water only. Tap water or mineral water is forbidden
- Liquid level inspection: Check every 10~15 working days; liquid level 10~15mm above plates, not exceeding maximum level mark
- Equalization charge: Perform equalization charge every 10 normal charge-discharge cycles to correct cell voltage difference and prevent weak cell
- 検査項目: セル電圧, electrolyte specific gravity, 端子温度, acid leakage, container corrosion
- Allowable cell voltage difference: ≤0.05V between all cells when fully charged; voltage difference>0.1V indicates weak cell requiring maintenance
- 一般的な障害の症状
Weak single cell: 急速な生産能力の低下とフォークリフトの稼働時間の短縮; 弱いセルは充電中に明らかな温度上昇と低い比重を示します
酸化 & 端子の過熱: ボルトが緩んでいると大電流が流れると発熱する, 銅バスバーの深刻な焼損
容器に酸が漏れる: ボックスの溶接腐食またはセルシェルの亀裂. フレームの腐食を避けるため、直ちに操作を停止してください。
過度の水分損失: 過充電または過剰な充電器電圧は電解液の消費を加速します
- 外国貿易税関 & コンプライアンス情報
Product name: 牽引用鉛蓄電池アセンブリ (フォークリフトのバッテリー)
HSコード: 85072000 (Other lead-acid accumulators)
認証: OEM向け韓国KC; IEC60254 トラクションバッテリーテストレポートが輸出可能
交通機関: 危険物 UN2794, 湿式鉛蓄電池, 危険物の梱包が必要
- 国内交換の必須要件 (2YBD-91041の代替品)
✅ 満足する必要があります:
- 外容器寸法: L985 × W536 × H745mm
- 仕様: 48V 715Ah PzS 管状牽引用バッテリー, 242V セルの個数
- Lifting lug position, terminal position and cable outlet direction consistent with original
- Total weight close to 3450kg (Battery weight affects forklift counterweight. Large weight deviation will impact forklift stability)
35B-X (Hyundai 48V version 3.5 ton electric forklift) can use this 48V 715Ah Rocket battery electrically, but cannot be installed as original assembly. Compartment structure differs, it is NOT OEM standard part
Original factory standard battery for 35B-X: 48V, capacity 600~700Ah. The battery compartment is side pull-out type (battery pulled out from side, not top hoisting type of 9U series). Internal cavity dimension of battery compartment, lifting lugs and cable outlet position are different from older 35B-9U
2YBD-91041 is OEM battery assembly for 35B-9U (top hoisting container), outer dimension L985×W536×H745mm
- Electrical Matching ✅
電圧: Both 48V. コントローラ, motor and charger voltage system are compatible
容量: 715ああ, larger than original 600~700Ah of 35B-X, longer working time after installation
Discharge characteristic: PzS traction lead-acid, fully matched forklift traction working condition
- Mechanical Installation Issues ⚠️ (Main constraint)
- Different battery removal method
35B-X: Side pull-out battery, battery box generally without top lifting lugs
2YBD-91041 battery box: Equipped with top lifting lugs, designed for top hoisting into battery compartment for 9U series
- Internal dimension of battery compartment
On-site measurement of internal L/W/H of 35B-X battery compartment, battery access direction and limit block is required.
Even if 985×536×745mm box fits into cavity, lifting lugs may cause interference, コンテナ取り付けベースの穴とケーブル出口の方向が一致しない可能性があります
- カウンタウェイトの重量検証
このバッテリーの湿重量 ≈ 3450kg. 35B-Xの許容バッテリー重量範囲を確認する必要があります. バッテリー重量はフォークリフトの定格積載量と安定性に直接影響します. 重すぎても軽すぎても安全上のリスクが生じます
- 2 つの実現可能な解決策
オプションA: オリジナルの Rocket セルと 35B-X 用のカスタムの新しいコンテナを再利用 (推奨)
オリジナルの24個のロケットトラクションセルを保管します。, カスタムの新しいコンテナ: 上部のリフティングラグを取り外します, サイドプルアウト構造に変更, 端子位置と取り付け穴を調整する. コンテナの寸法は、35B-X コンパートメントの測定された内部サイズに基づいて作成されます。. 電気回路は変わらず, 完璧なフィット感.
オプション B: 既存の 2YBD-91041 完全なコンテナを 35B-X に強制的に取り付けます
要件: 元のリフティングラグを取り外します, コンパートメント制限ブロックを変更する, 銅バスバーコンセントを交換する, add fixing bracket; リスク: Side pull-out function lost. Battery can only be lifted out for future replacement. Heavy modification, 推奨されません.
- 重要なお知らせ
Distinguish: 35B-X (48V low voltage small tonnage) vs 40~55B-X (309V high voltage lithium large tonnage). The latter cannot use this 48V lead-acid battery at all, 混乱しないでください.
クイックチェックリスト (On-site measurement to confirm fit)
- Open battery compartment of 35B-X, measure internal length, width and maximum allowable height
- Confirm battery removal method: side pull-out / top hoisting
- Record positive & negative terminal position and cable outlet direction
コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ


