ABB 2TLA020070R1700 Programmable Safety Controller

상표: 씨줄-Jokab Safety；제품: 프로그래밍 가능 Safety Controller (안전 PLC)

모델 정의

2TLA020070: Base part number for Pluto-series safety controllers

R1700: Order suffix for hardware revision B46 v2

Full designation: Pluto B46 v2

I-O Configuration (총 46 전철기)

1. 24 fail-safe inputs (safety inputs)
2. 16 configurable channels: non-safe output / safety input
3. 4 independent safety relay outputs
4. 2 independent safety transistor outputs

Equipped with Pluto Safety-Bus safety fieldbus for networking expansion

Key Safety & 전기 사양

일반적인 응용 분야

Machine safety control: 비상 정지, 안전문, 안전 라이트 커튼, 양손 제어, safe speed monitoring; multi-controller safety networking, standalone high-I/O safety projects.

Series Comparison Reference

Pluto B20 v2: 20 I/O 포인트, compact unit

Pluto B46 v2 (2TLA020070R1700): 46 I/O 포인트, high-density model

메모: B46 v2 denotes hardware version v2. Older-revision B46 has a different order number; programs are compatible for migration.

Related Accessories

1. Programming cable: Pluto USB programming cable
2. 게이트웨이: GATE-P2 (프로피버스), GATE-EIP (EtherNet-IP) for connection to standard PLC hosts
3. 소프트웨어: Pluto Manager (available for download from ABB official website)

Spare-Unit / Second-Hand Unit Inspection Checklist

1. Power-on test and verify status LED operation for all channels
2. Read firmware revision to confirm v2 hardware variant
3. Complete program upload-download functional test
4. Perform load-based switching test on relay outputs
5. Inspect terminals for burn marks and backplane for corrosion

ABB Pluto B46 v2 (2TLA020070R1700) Programming Manual Key Content

하드웨어: Pluto B46 v2; Software Tool: Pluto Manager (free download via ABB website)

Official full-reference document: Pluto Safety-PLC Programming manual, 의사. ID: 2TLC172002M0218 (English original; no complete official Chinese translation)

📘 Table-of-Contents Summary (Official Programming Manual)

1. Safety precautions (safety-logic review; mandatory full-machine testing; software cannot detect logical errors)
2. Pluto Manager installation, DEMO mode, license activation
3. Complete new-project workflow
4. Hardware I-O configuration (B46-v2-specific 46-point I-O definition)
5. Addressing and symbolic naming of variables
6. Ladder-logic programming + TÜV-certified safety function-block library
7. Registers, system registers, analog signal processing
8. Pluto-Safety-Bus multi-master networking (최대. 32 Pluto units)
9. Program download, IDFIX program duplication, password protection
10. Online monitoring, 결함 진단, error codes
11. Modbus-TCP communication, host-PLC interfacing via gateways
12. Program examples, firmware update, hardware compatibility notes

🛠️ B46 v2 Hardware I-O Configuration Mandatory Programming Settings

주문번호: 2TLA020070R1700 Pluto B46 v2

나: 24 fixed fail-safe inputs

IQ: 16 multi-function channels, software-selectable: Failsafe Input / Non-safe Output

QR: 4 independent safety relay outputs (SIL3/PLe)

QT: 2 independent safety transistor outputs (SIL3/PLe)

IQ channel operating mode must be defined in the Pluto Manager hardware configuration page. Mismatch between wiring and software configuration triggers hardware faults.

🔧 Standard Development Workflow in Pluto Manager

1. Create new project, select hardware type `Pluto B46 v2`, assign Safety-Bus station address
2. Configure I-O parameters

I-inputs: Dynamic / static input mode (static for light-curtain OSSD signals; dynamic for dual-channel E-stop and safety-gate circuits)

IQ channels: Individually set as Failsafe Input or Non-safe Output

3. Symbolic variable assignment: I-input, Q-output, M-retentive memory, GM-global memory (bus-shared), R-registers
4. LD ladder-logic programming: invoke TÜV-certified safety function-blocks (비상 정지, safety gate, 양손 제어, light-curtain muting, safe speed monitoring)
5. Compile project, resolve errors, assign program password
6. Download program via USB cable. For multi-unit networks, programs are automatically distributed over Pluto-Safety-Bus to all stations
7. Online monitoring: Forced-signal testing permitted only during commissioning, followed by complete machine safety validation
8. 선택 과목: IDFIX-PROG hardware program copy module for spare-unit replacement without a PC

📦 Frequently Used TÜV-Certified Safety Function Blocks

⚠️ Critical Safety Programming Constraints

1. Safety-related functions must use TÜV-certified function blocks. Implementing safety logic purely with generic ladder logic voids SIL3/PLe compliance.
2. IQ configured as outputs are non-safe outputs and shall not be used for safety-related load disconnection. Safety cut-off must use QR relay outputs or QT transistor outputs.
3. Pluto-Bus operates in all-master architecture. Each controller controls its local outputs; GM global memory handles cross-unit data exchange.
4. Program download requires password. DEMO mode permits project viewing only; compilation and download functions are disabled.
5. Spare-unit replacement: Program can be downloaded via USB, or duplicated rapidly using IDFIX-PROG module.

📑 Related Manual List

💻 Software Download

Pluto Manager: Free download from ABB official website under low-voltage safety products. Match firmware revision; B46 v2 requires compatible v2-series firmware.

❗ Brief Fault-Code Reference (B46 v2)

Er20: No user program present

Er24: Program error

Er31: IDFIX program mismatch

Er4x: I-O channel fault (dynamic-input open-circuit / 단락)

Pluto Manager OS Compatibility (for Pluto B46 v2)

Windows-only platform. No native MacOS or Linux releases. 참조: Programming Manual Doc. ID 2TLC172002M0218

✅ Officially Validated & 지원됨 (추천)

1. 윈도우 7 SP1 (32-조금 / 64-조금) 전문적인 / Enterprise / 궁극적인
2. 윈도우 10 (32-조금 / 64-조금) 전문적인 / Enterprise (most widely-used for industrial commissioning)

For B46 v2 hardware, use recent Pluto-Manager releases; Windows 10-64-bit is preferred.

⚠️ Functional but NOT Officially Validated (field-proven, no manufacturer warranty coverage)

윈도우 8 / 윈도우 8.1 (32-조금 / 64-조금)

Windows Server 2008R2 / 2012 / 2012R2 / 2016 / 2019

윈도우 11: Installs and operates in real-world deployments. USB communication may require compatibility-mode adjustments. Not listed within ABB official support matrix. 윈도우 10 remains preferred for site commissioning.

❌ Not Recommended / Unsupported

1. Windows Vista: Installation possible, insufficient security components, not recommended
2. Windows XP and earlier: Cannot run
3. Mac OS, 리눅스: No native builds; operation only via Windows virtual machine (VMware / VirtualBox)

📋 Software Dependencies (installed automatically; missing components cause runtime errors)

1. Microsoft .NET Framework 4.6.1
2. Visual C++ 2005, 2010 Runtime Libraries

🖥️ Minimum Hardware Requirements

CPU: 1 GHz or higher (x86/x64)

숫양: 2 GB (32-조금) /3 GB (64-조금)

HDD: 3 GB free storage space

💡 Practical Operation Notes

1. 윈도우 11 작업: If USB programming-cable communication fails, right-click application shortcut, enable compatibility mode for Windows 8 and run as administrator.
2. DEMO mode: No license key required. Program download and online monitoring functions require valid license.
3. Software-hardware matching: Pluto Manager version ≥ V14. Older software revisions cannot recognize v2 hardware.