ABB PDP22-FBP Series Module

씨줄 PDP22‑FBP.100 | PROFIBUS DP Fieldbus Interface Module

ABB FBP series PROFIBUS DP/V1 fieldbus interface plug-in is used to connect FBP devices such as intelligent motor controllers (UMC) to PROFIBUS DP network. It supports high-speed communication up to 12 Mbps with IP65 protection grade, 혹독한 산업 환경에 적합.

모델 코드 설명

코드 세그먼트	설명
PDP22	제품 시리즈: PROFIBUS DP fieldbus plug-in, applicable to FBP devices e.g. UMC intelligent motor controller
FBP	인터페이스 유형: FieldBusPlug, fieldbus plug-in, supports PROFIBUS DP/V1 protocol
100	사양 코드: 표준 버전, max transmission rate 12 Mbps, 2-channel design

Main Technical Specifications

범주	Detailed Parameters
상표	씨줄 (스위스)
유형	PROFIBUS DP/V1 Fieldbus Interface Plug-in (FieldBusPlug)
통신 프로토콜	PROFIBUS DP V0/V1, IEC를 준수 61158
전송 속도	9.6 kbit/s ~ 12 메가비트/초 (configurable via configuration software)
통신 인터페이스	RS-485 differential signal, A-coded M12 connector
Channel Quantity	2 채널
전원공급장치	DC 24V ±10%, typical power consumption ≤0.6 W
정격전류	1 에이
보호 등급	IP65 (for on-site installation)
작동 온도	-20℃ ~ +60℃
Max Cable Length	250 미터 (varies by transmission rate)
차원	40 mm × 20 mm × 9 mm
무게	대략. 10 g
인증	CE, cUL, IEC 61131-2 industrial control standard
주문 번호	1SAJ240100R1013 (공식적인), 6296317 (Supplier)

Full PDP22-FBP Series Model List

모델	Core Specification	전송 속도	보호 등급	주요 특징
PDP22-FBP.100	표준형, 2 채널	9.6 kbit/s ~ 12 Mbps	IP65	Basic PROFIBUS DP interface, matches UMC intelligent motor controller
PDP22-FBP.025	Economic type, 1 채널	9.6 kbit/s ~ 1.5 Mbps	IP65	For low-speed application, cost-optimized design
PDP22-FBP.050	High-speed type, 2 채널	9.6 kbit/s ~ 12 Mbps	IP65	Enhanced anti-interference, suitable for complex industrial sites
PDP22-FBP.200	Multi-protocol type, 2 채널	9.6 kbit/s ~ 12 Mbps	IP65	Compatible with PROFIBUS DP & PROFIBUS FMS
PDP22-FBP.500	Redundant type, 4 채널	9.6 kbit/s ~ 12 Mbps	IP65	Dual redundant design to improve system reliability
PDQ22-FBP.100	Isolated type, 2 채널	9.6 kbit/s ~ 12 Mbps	IP65	Electrical isolation design to avoid signal interference

Equivalent & 교체 모델

교체 유형	모델	상표	차이점 설명
Same Series Replacement	PDP22-FBP.050	씨줄	Stronger anti-interference, 완벽하게 호환됨, 약간 높은 가격
Same Brand Upgrade	PDP22-FBP.200	씨줄	Multi-protocol support including PROFIBUS FMS, wider application
Competitor Alternative	3RK1901-1CB00	지멘스	PROFIBUS DP interface module for Siemens motor controllers, slight mounting size difference
Competitor Alternative	1786-RPA	록웰	PROFIBUS DP module with compatible protocol, needs configuration adjustment
Competitor Alternative	X20BM11	비&아르 자형	High-speed PROFIBUS DP module for B&R automation system

적용범위 & Industry Fields

권장 애플리케이션

Intelligent Motor Control: Connect UMC motor controllers to PROFIBUS DP network for motor status monitoring and remote control
Distributed I/O System: Act as communication bridge between field devices and control layer, ideal for MCC drawer-type cabinet
Process Industry: Critical equipment control in oil refineries and chemical plants; support hot-swap without offline bus nodes
Manufacturing Automation: Centralized monitoring and management of production line motors, pumps and fans
빌딩 자동화: Control network for HVAC and lighting systems in large commercial buildings
에너지 산업: Data collection and transmission for photovoltaic and wind power station equipment

Not Recommended Scenarios

Non-PROFIBUS DP networks: Not directly applicable to PROFINET, EtherCAT and other industrial Ethernet systems
Ultra-long distance transmission: Over 250m distance requires additional signal amplifiers
Severe electromagnetic interference environment: Use PDP22-FBP.050 enhanced version without extra shielding measures
Non-FBP standard devices: Extra adapter is required for connection
Common Fault Diagnosis & 솔루션

결함 현상	가능한 원인	솔루션
Communication interruption	1. Bus cable failure	1. Check M12 connection and cable continuity
	2. Unactivated terminating resistor	2. Confirm 120惟 terminating resistor setting
	3. Address conflict	3. Assign exclusive PROFIBUS address
	4. Unstable power supply	4. Ensure 24V DC power within 卤10% tolerance
Abnormal LED indicator	1. Bus power off	1. Check bus and module power supply
	2. Mismatched communication protocol	2. Set protocol to PROFIBUS DP/V1 in configuration software
	3. Module hardware failure	3. Replace module and contact ABB technical support
Data transmission error	1. Excessively high baud rate	1. Reduce transmission rate for stable communication
	2. Poor cable shielding	2. Optimize shielding layer connection and grounding
	3. Surrounding strong interference sources	3. Keep away from frequency converters and high-power equipment
Unrecognizable module	1. Improper installation	1. Reinstall firmly in place
	2. Device incompatibility	2. Confirm device complies with FBP standard
	3. Outdated firmware	3. Upgrade module firmware to latest version

Daily Maintenance Guidelines
정기점검: Check M12 connector tightness and corrosion every 3 개월
Cleaning Maintenance: Remove surface dust with dry compressed air, avoid chemical detergents
전원 관리: Keep 24V DC power stable within ±10% fluctuation range
Hot-swap Operation: Follow official ABB operation specifications during drawer replacement to prevent module damage
펌웨어 업그레이드: Update firmware regularly via official ABB website for better performance and stability
Network Monitoring: Real-time monitor communication status via PROFIBUS diagnostic tools to eliminate hidden troubles in advance
항공 화물 규정 준수 & 인증

Air Shipment Approval: No built-in lithium battery or super capacitor, classified as general industrial electronic component, available for normal air transportation

주요 인증: CE (IEC를 준수 61158), cUL (UL을 준수 508), IEC 61131-2

HS Code: 85371090 (Network interface equipment for industrial control)