접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지
ABB XT2N160 TMA 160 3p F F
주문번호: 1SDA061805R1 (1SDA067020R1)
전체 모델: XT2N 160 TMA 160-1600 3p F F
시리즈: ABB Tmax XT Series 성형 케이스 회로 차단기
- 핵심 매개변수 요약
| 매개변수 카테고리 | 상세사양 | 메모 |
| 기본정보 | • Frame size: XT2 | For low-voltage power distribution in industry and buildings |
| • Frame current: 160에이 | ||
| • Rated current In: 160에이 | ||
| • Poles: 3피 | ||
| • 차단용량: Type N (36kA @ 415V AC) | ||
| • Rated operating voltage Ue: 690뷔와, 500DC에서 | ||
| • Standards: IEC 60947-2, GB 14048.2 | ||
| Trip System | • Trip type: TMA thermal-magnetic (초과 적재 + 단락 보호) | Not suitable for earth fault protection; additional accessories required |
| • 과부하 보호 (그리고): Adjustable, 160에이 | ||
| • Short-circuit protection (I3): Adjustable, 800~1600A | ||
| • Instantaneous short-circuit protection: Fixed at 10In (1600에이) | ||
| • Protection curve: IEC를 준수합니다 60947-2 | ||
| 설치 & 연결 | • Mounting type: 결정된 (에프) | Standard DIN rail or screw mounting |
| • Connection: 전면 연결 (에프) | ||
| • Operation: Direct handle operation | ||
| • 크기: 90mm×130mm×82.5mm | ||
| • 무게: 대략. 1.574kg | ||
| • Protection degree: IP20 | ||
| 전기적 특성 | • Rated insulation voltage Ui: 800다섯 | Suitable for AC-1, AC-2, AC-3, AC-4 duties |
| • Rated impulse withstand voltage Uimp: 8kV | ||
| • Rated short-time withstand current Icw: 16kA/1초 | ||
| • Rated frequency: 50/60헤르츠 | ||
| • Wiring capacity: 최대. 95mm² copper, 최대. 70mm² aluminum |
- Detailed Protection Characteristics
2.1 과부하 보호 (Thermal)
특성: Inverse time curve per IEC 60947-2
Adjustable range: 160에이 (결정된)
Trip time:
1.05~ 안에: No trip for long duration
1.3~ 안에: Trip within ≤1 hour
6~ 안에: Trip within 2~10 seconds
2.2 단락 보호 (Magnetic)
Instantaneous trip: 800~1600A adjustable (I3)
Short-time delay: 사용할 수 없음 (TMA has no short-time delay; TMD or electronic trip required)
Instantaneous short-circuit protection: Fixed at 10In (1600에이), non-adjustable
- 장착 치수 & 물리적 특성
| 차원 | 값 | 단위 |
| 너비 | 90 | mm |
| 키 | 130 | mm |
| 깊이 | 82.5 | mm |
| 장착 구멍 간격 | 75 | mm |
| 터미널 간격 | 기준 | mm |
| 무게 | 1.574 | kg |
| Package size | 145*130*208 | mm |
| Package weight | 1.2 | kg |
Mounting Requirements:
35mm 표준 DIN 레일 (안에 60715) recommended
주변 온도: -25°C ~ +70°C
고도: 2000m 이하 (derating required above)
보호: IP20 (front); must be installed in enclosure with IP30 or higher
- 대사 & Extended Models in the Same Series
4.1 Direct Replacement Models
| 모델 | 차이점 | 애플리케이션 |
| XT2N160 TMA 160 3P F F | Identical specifications | 직접 교체, no modification needed |
| XT2N160 TMA 160 3P P F | Plug-in mounting (피) | Frequent replacement or maintenance |
| XT2N160 TMA 160 3P F W | Rear connection (여) | 제한된 캐비닛 공간 |
4.2 Function-Extended Models
| 모델 | Functional Upgrade | 주문 번호. |
| XT2N160 Ekip LSI 160 3P F F | 전자여행, LSI protection | 1SDA067071R1 |
| XT2N160 Ekip LSIG 160 3P F F | 전자여행, LSIG protection (including earth fault) | 1SDA067072R1 |
| XT2N160 TMD 160 3P F F | Thermal-magnetic with short-time delay | 1SDA067035R1 |
4.3 Pole-Extended Models
4P version: XT2N160 TMA 160 4p F F (주문번호: 1SDA061806R1 / 1SDA067041R1)
Neutral pole rated current: 50% 또는 100% of phase current optional
4.4 Cross-Brand Reference
슈나이더: NSX160N TMD160 3P F
지멘스: 3VT8116-1AA03-0AA0
친트: NM1-160S/3300 160A
- Recommended Accessories
| Accessory Type | 모델 | 설명 |
| 보조 접점 | XT2-AS11 | 1아니요 + 1NC, for status indication |
| Alarm contact | XT2-AL11 | 1아니요 + 1NC, for fault alarm |
| Shunt trip | XT2-SHT | Remote tripping, AC/DC 220V |
| Undervoltage release | XT2-UVT | Undervoltage protection, AC 220V |
| Rotary handle | XT2-CR | Door-mounted operation, improved safety |
| Extended rotary handle | XT2-CRE | For deep panels |
| Terminal cover | XT2-TC | Protect terminals, prevent electric shock |
| Label holder | XT2-LB | For marking breaker parameters |
- 응용 & 선택 참고 사항
6.1 일반적인 응용 분야
산업 플랜트: Motor protection (≤160A), distribution feeder protection
Commercial buildings: 공조, 조명, 펌프 제어
하부 구조: Small substations, data centers, PV systems
기타: OEM equipment, 농업 기계, marine systems
6.2 선택 가이드
| Requirement | 추천 | Not Recommended |
| Motor protection | ✓ (with proper setting) | Small motors (<10에이); use MCB instead |
| Distribution protection | ✓ (sub-circuits) | Main incomer (use XT3/XT4 series) |
| Earth fault protection | ✗ (needs accessories) | ✓ (choose Ekip LSIG) |
| Frequent operation | ✗ (MCCB not suitable) | ✓ (접촉기 + 계전기) |
| Isolation function | ✓ (IEC 60947-3) | – |
6.3 Selection Cautions
- Ensure rated current In matches load
- Breaking capacity must meet system short-circuit current (N: 36kA @ 415V)
- 설치 (fixed/plug-in) and connection (front/rear) must match panel design
- Auxiliaries, shunt/undervoltage trips ordered separately
- Not for DC short-circuit protection (use DC-rated model)
- 문제 해결 & 유지
7.1 Common Faults & 솔루션
| Symptom | 가능한 원인 | 솔루션 |
| 빈번한 트립 | 1. 초과 적재 | 1. Check load |
| 2. 단락 | 2. Locate short circuit | |
| 3. Incorrect trip setting | 3. Reset settings | |
| 4. 높은 주변 온도 | 4. Improve ventilation | |
| Cannot close | 1. No power to undervoltage trip | 1. Check control power |
| 2. Shunt trip not reset | 2. Reset shunt trip | |
| 3. Mechanism fault | 3. Contact ABB service | |
| 4. Line fault | 4. Clear fault | |
| No output after closing | 1. Main contacts damaged | 1. Inspect/replace contacts |
| 2. 느슨한 배선 | 2. 터미널을 조이세요 | |
| 3. 트립 장치 결함 | 3. 트립 유닛 교체 | |
| Aux contact no signal | 1. Auxiliary contact defective | 1. Replace auxiliary contact |
| 2. Wrong wiring | 2. Check wiring | |
| 3. Improper switching | 3. Adjust contact position |
7.2 Maintenance Recommendations
점검: 모든 6 months – check wiring and mechanism
청소: 모든 12 months – remove dust to maintain insulation
Operation test: Once per year – 3~5 manual ON/OFF cycles
Trip test: Once every 2 years – simulate overload and short circuit
Service life: Typically 10 연령, depending on duty and environment
- 주문 & 포장
Standard package: 1 단위/상자, including installation manual and certificate
MOQ: 1 unit
보증: 18 months from commissioning, 또는 24 months from delivery (whichever comes first)
Order code: 1SDA061805R1 (or 1SDA067020R1, varies by region)
Complete Model Guide for ABB Tmax XT2 Series (160프레임)
프레임 크기: XT2 (160에이)
정격전압: 690뷔와, 500DC에서
폴란드: 3피 / 4피
Breaking classes: N(36그만큼), 에스(50그만큼), 시간(70그만큼), 엘(100그만큼)
- 모델 명명 규칙
XT2 [Breaking Class] [프레임 전류] [여행 유형] [현재 범위] [폴란드] [설치] [연결]
Breaking class:
N: 36kA @ 415V (기준)
에스: 50kA @ 415V (enhanced)
시간: 70kA @ 415V (high performance)
엘: 100kA @ 415V (ultimate)
프레임 전류: 160 (결정된)
Trip type:
TMA: Thermal-magnetic (초과 적재 + 동시에 일어나는, no short-time delay)
TMD: Thermal-magnetic (초과 적재 + short-time delay + 동시에 일어나는)
Ekip LSI: Electronic (초과 적재 + short-time delay + 동시에 일어나는)
Ekip LSIG: Electronic (초과 적재 + short-time delay + 동시에 일어나는 + 지락)
Ekip I: Electronic (instantaneous only)
Current range: 예를 들어, 160-1600 (TMA 160A)
폴란드: 3피 / 4피
설치: 에프 (결정된) / 피 (Plug-in)
연결: 에프 (앞쪽) / 여 (뒤쪽)
- XT2 Series Model List (by Breaking Class)
2.1 Standard Breaking (N, 36그만큼)
| Model Prefix | 여행 유형 | 일반 모델 | 현재 범위 | 애플리케이션 |
| XT2N160 | TMA | XT2N160 TMA 160-1600 3P F F | 160에이 | General distribution, 모터 |
| TMD | XT2N160 TMD 100-1000 4P F W | 100에이 | Systems requiring short-time delay | |
| Ekip LSI | XT2N160 Ekip LSI R125 3P P F | 125에이 | Electronic protection, remote monitoring | |
| Ekip LSIG | XT2N160 Ekip LSIG R80 4P F F | 80에이 | Earth fault protection required |
Example Order No.: 1SDA061805R1 (XT2N160 TMA 160 3P F F)
2.2 Enhanced Breaking (에스, 50그만큼)
| Model Prefix | 여행 유형 | 일반 모델 | 현재 범위 | 애플리케이션 |
| XT2S160 | TMA | XT2S160 TMA 63-630 3P F F | 63에이 | 산업, heavy-duty equipment |
| TMD | XT2S160 TMD 40-400 4P P W | 40에이 | Frequently started motors | |
| Ekip LSI | XT2S160 Ekip C Dip LSI R100 3P F F | 100에이 | Complex commercial distribution | |
| Ekip LSIG | XT2S160 Ekip LSIG R50 4P F F | 50에이 | 데이터 센터, medical facilities |
Example Order No.: 1SDA067021R1 (XT2S160 TMA 160 3P F F)
2.3 High Performance Breaking (시간, 70그만큼)
| Model Prefix | 여행 유형 | 일반 모델 | 현재 범위 | 애플리케이션 |
| XT2H160 | TMA | XT2H160 TMA 32-320 3P F F | 32에이 | Industrial systems with high short-circuit current |
| TMD | XT2H160 TMD 3.2-32 4P F F | 3.2에이 | Precision equipment, control circuits | |
| Ekip LSI | XT2H160 Ekip Dip LSI R63 3P P F | 63에이 | Generators, substations | |
| Ekip LSIG | XT2H160 Ekip LSIG R25 4P F F | 25에이 | PV, renewable energy |
Example Order No.: 1SDA067587R1 (XT2H160 TMD 3.2-32 3P F F)
2.4 Ultimate Breaking (엘, 100그만큼)
| Model Prefix | 여행 유형 | 일반 모델 | 현재 범위 | 애플리케이션 |
| XT2L160 | TMA | XT2L160 TMA 100-1000 4P F F | 100에이 | Heavy industry with very high fault level |
| TMD | XT2L160 TMD 160-1600 3P F W | 160에이 | Large motor control centers | |
| Ekip LSI | XT2L160 Ekip LSI R160 3P P F | 160에이 | 야금, 화학적인, hazardous areas | |
| Ekip LSIG | XT2L160 Ekip LSIG R125 4P F F | 125에이 | Petrochemical, 채광 |
Example Order No.: 1SDA067667R1 (XT2L160 TMA 100-1000 4P F F)
- Trip Unit Comparison
| 여행 유형 | 보호 | Adjustable Parameters | Typical Load | Price Level |
| TMA | 초과 적재 + Instantaneous | 그리고, I3 | Motors, general distribution | Economy |
| TMD | 초과 적재 + Short-time + Instantaneous | 그리고, Isd, tsd, I3 | Transformers, capacitors | 중간 |
| Ekip LSI | 초과 적재 + Short-time + Instantaneous | Full range, communication | Critical distribution | Medium-High |
| Ekip LSIG | 초과 적재 + Short-time + Instantaneous + Earth Fault | Full range, communication, logging | Sensitive loads, safety | 높은 |
| Ekip I | Instantaneous only | I3 | Short-circuit intensive devices | Economy |
- 특수 모델 & 옵션
4.1 4P Neutral Configurations
기준: Neutral = 50% 단계 (general distribution)
Heavy: Neutral = 100% 단계 (non-linear loads: VFD, UPS)
예: XT2N160 TMA 160 4P F F (100% neutral)
4.2 Plug-in Mounting (피)
Fast replacement, suitable for critical equipment
예: XT2S160 TMD 80 3P P F
4.3 Rear Connection (여)
Saves cabinet space, compact panels
예: XT2H160 Ekip LSI R63 3P F W
4.4 액세서리 호환성 (Full Series)
| Accessory | 모델 | 설명 |
| 보조 접점 | XT2-AS11 | 1아니요+1NC, status indication |
| Alarm contact | XT2-AL11 | 1아니요+1NC, 결함 경보 |
| Shunt trip | XT2-SHT | Remote tripping, AC/DC 220V |
| Undervoltage release | XT2-UVT | Undervoltage protection, AC 220V |
| Rotary handle | XT2-CR | Door operation, safety |
- Quick Selection Table
| 애플리케이션 | Recommended Class | 여행 유형 | 폴란드 | Mount/Conn |
| General industrial | N/S | TMA/TMD | 3피 | F/F |
| Motor protection | N/S | TMA | 3피 | F/F |
| Commercial lighting | N | TMA | 3P/4P | F/F |
| Data center | H/L | Ekip LSIG | 4피 | F/W |
| PV system | H/L | Ekip LSIG | 4피 | F/F |
| Frequent maintenance | Any | Any | 3P/4P | P/F |
- 대사 & Upgrade Path
6.1 Same-Frame Upgrade
차단 용량: XT2N → XT2S → XT2H → XT2L (dimensions unchanged)
Trip unit: TMA → TMD → Ekip LSI → Ekip LSIG
Mount/connection: F/F → P/F or F/W
6.2 Cross-Frame Upgrade
XT2 (160에이) → XT3 (250에이) → XT4 (250A enhanced) → XT5 (630에이)
Note dimension and parameter changes
All XT2 series models comply with IEC 60947-2 그리고 GB 14048.2.
Fixed dimensions: 90mm × 130mm × 82.5mm for easy system expansion and maintenance.
