Delta DVP16SP11T 디지털 I/O 확장 모듈

DVP16SP11T is a 16‑point slim digital mixed I/O expansion module of Delta DVP‑S series, configured as 8 에서 (디지털 입력) + 8 ~하다 (디지털 출력, NPN sinking transistor).

It is specially designed for expanding I/O points of Delta DVP‑S series PLC main units, suitable for small automation systems with limited space, and supports high‑speed pulse output and counting functions.

1. 모델 설명 & 기본 포지셔닝

제품 포지셔닝:

Compact I/O expansion module for DVP‑S series PLC, used to expand the digital control capability of the main unit.

Especially suitable for space‑limited applications such as small mechanical equipment, 자동화된 생산 라인, and building control systems.

It can be seamlessly connected with DVP‑S series main units (DVP12SA11T, DVP16SA11T, 등.).

2. 주요 기술 매개변수

3. 특징 & 구조적 장점
4. Ultra‑Slim Compact Design

Only 25mm wide, saves about 50% installation space compared with traditional modules, ideal for high‑density I/O control panels.

Gapless side‑by‑side assembly for maximum space utilization.

Clip‑on connection, no screws required, 쉬운 설치.

2. Flexible I/O Configuration

8 입력 + 8 output mixed design to meet I/O requirements of most small control systems.

Input supports sinking/sourcing switching, compatible with NPN/PNP sensors.

Fast transistor response (10μs 이하), suitable for high‑frequency switching control.

3. High‑Speed Control Capability

2 high‑speed pulse outputs up to 10kHz for simple positioning (예를 들어, stepper motor drive).

4 high‑speed counter inputs up to 20kHz for speed measurement, part counting, 등.

Supports interrupt input for fast response to external emergency signals.

4. Reliable Electrical Performance

Enhanced anti‑interference design, complies with industrial EMC standards (EN 61000‑6‑2 / EN 61000‑6‑4).

Output short‑circuit protection to prevent module damage.

Built‑in surge suppression circuit to protect output devices from back EMF of inductive loads.

4. 응용분야

5. Comparison of Similar Modules in DVP‑S Series

6. 연결 & 작동 참고 사항
7. System Connection

Connect to DVP‑S series main unit via left expansion port; 최대 8 modules can be expanded.

Modules connected by dedicated expansion cable, no extra configuration needed.

맥스. I/O points after expansion: main unit points + expansion points (최대. 128 전철기).

2. 배선 규칙

Input wiring: 24VDC supply, COM to 0V, signal terminal to sensor signal.

Output wiring: 24VDC supply, COM to +24V, signal terminal to load negative (sinking output).

4 outputs share one COM terminal; 2 COM groups (4 points each) for grouped control.

3. High‑Speed Function Configuration

High‑speed pulse output: Y0/Y1 up to 10kHz for stepper or servo motors.

High‑speed counter: X0–X3 up to 20kHz, 1-단계 / 2‑phase configurable.

Configured via programming software (DVPSoft), no extra hardware required.

4. 보호 조치

Surge suppressor on input side to resist external interference.

Freewheeling diode for inductive loads to protect transistors.

Avoid output short‑circuit; 최대. 0.5A continuous per output.

7. 선택 & 대사
8. 선택 지침

출력 유형: Transistor for high‑frequency, low inductance; Relay for AC/DC, high power.

I/O 포인트: Choose 8‑point or 16‑point based on controlled devices.

공간: Slim modules preferred for narrow control cabinets.

High‑speed functions: Select T‑type for pulse output or high‑speed counting.

2. 교체 옵션

8. 일반적인 응용 사례
9. Small Packaging Machine:

8 입력 (material position, product detection, 안전문),

8 출력 (feeding motor, sealer, cutter, conveyor),

high‑speed pulse for feeding positioning.

2. Automated Assembly Line:

입력 (part position, fixture status),

출력 (실린더, 모터, 지표),

high‑speed counting for production statistics.

3. Building Lighting Control:

입력 (motion sensor, light sensor, manual switch),

출력 (조명 회로, HVAC 팬),

energy‑saving control.

Packing Specification: 1 pc/box, 10 PC/판지

핵심 차이점: Delta DVP16SP11T vs. Similar Modules

At a Glance:

Delta DVP16SP11T features ultra‑slim 25mm width, 비용 효율적, seamless compatibility with DVP‑S series.

지멘스 / 미쓰비시 / Omron excel in industrial ecosystem and high‑end functions.

Xinje focuses on cost‑effective domestic replacement.

1. Main Competitors & Basic Comparison

2. 주요 기능 & 성능 차이

2.1 High‑Speed Control (핵심 차이점)

2.2 설치 & 배선

2.3 소프트웨어 & 의사소통

3. Application‑Based Selection Suggestions
4. Best for Delta DVP16SP11T

Extremely limited space: 25mm ultra‑slim for compact panels.

DVP‑S series system: Direct expansion without adaptation.

비용 효율적 + basic high‑speed: 10kHz pulse / 20kHz counter for small packaging, 라벨링, 컨베이어.

Fast delivery: DVPSoft is easy to learn, short commissioning time for OEMs.

2. Best for Siemens S7‑200 SMART EM AT02

Large/complex lines: 프로피넷, full diagnosis, multi‑device coordination.

Siemens ecosystem: PLC, servo, HMI unified.

높은 신뢰성: 자동차, 화학적인, 수처리.

3. Best for Mitsubishi FX5U‑16EYT/ES

정밀 포지셔닝: 200kHz pulse, multi‑axis interpolation for CNC, precision assembly.

Mid‑to‑high automation: Built‑in Ethernet, 비슷한 물건, CC‑Link.

장기 지원: Mature FX ecosystem.

4. Best for Omron CP1W‑16ET

가혹한 환경: Strong anti‑interference, 먼지, electromagnetic noise.

계산 & 점검: High‑speed counting for packaging, 정렬.

Omron sensor/HMI system.

5. Best for Xinje XC3‑16EYT

국내 대체 / tight budget: Lower cost than Delta.

Beginner development: XCPPro easy to use.

Domestic equipment matching: 높은 비용 성능.

4. Cross‑Brand Replacement Notes
5. I/O point match: Delta is 8DI+8DO; Siemens/Mitsubishi/Omron are 16DI+16DO per module. Adjust I/O layout.
6. Output polarity: Delta is NPN sinking; others often support sink/source. Confirm COM wiring.
7. High‑speed downgrade: If replacing from Mitsubishi/Siemens to Delta, reduce pulse/counter speed and reprogram.
8. 의사소통: Delta uses mainly MODBUS; Siemens/Mitsubishi support industrial Ethernet. Adjust protocol settings.