Delta DVP28SV11T2 High-Performance Slim-type PLC

DVP28SV11T2

인주: 델타 PLC 시리즈 코드

28: 총 I/O 포인트 28 전철기 (16DI+12DO)

SV: High-performance main unit of SV series; SV2 denotes second-generation hardware (suffix T2 = SV2)

11: DC24V 전원 공급 장치

티: Transistor output NPN (sink type)

2: Second-generation SV2 hardware version, supporting left-side high-speed expansion port

핵심 하드웨어 사양

소프트웨어

프로그래밍 소프트웨어: WPLSoft / ISP소프트, with COMMGR communication manager

Supported features: 4-레벨 비밀번호 보호, program backup, battery-free real-time clock, 16-channel external interrupt.

일반적인 응용 분야

서보 포지셔닝, XY manipulators, 라벨러, 포장 기계, 절단 장비, 섬유 기계, and other equipment requiring multi-axis pulse motion control.

Distinction of Models in the Same Series

DVP28SV11T: First-generation SV, 16K-step program, without left-side high-speed expansion port

DVP28SV11T2: SV2 second-generation, 30K-step program, with left-side high-speed expansion port

DVP28SV11R2: Relay-output version

DVP28SV11S2: PNP transistor-output version

Second-hand Inspection Checklist

1. 전원 켜기 테스트: POWER indicator steady ON; check status of RUN/ERROR/BAT-LOW indicators; low-battery alarm.
2. I/O test: Force ON/OFF to verify all input and output points.
3. High-speed pulse test: Test Y0-Y3 pulse output up to 200kHz; verify high-speed counter reception on X0/X1.
4. 통신 테스트: Program upload/download via RS232 and RS485; Modbus read-write test.
5. Expansion port inspection: Check left-side and right-side expansion connectors for oxidation and intact pins.

Alternative References

델타 native alternatives: DVP28SV11S2 (PNP); DVP28SE211T (SE2 new generation, with Ethernet port)

국내 대안: Inovance H2U-1616MT-XP (200kHz pulse, 4-중심선)

Programming Software for Delta DVP28SV11T2 (SV2 Series)

This unit belongs to second-generation DVP-SV2 PLC; two official software packages are supported:

1. ISP소프트 (새로운 프로젝트에 권장)

최신 버전: V3.24 and above

Mandatory companion: COMMGR communication manager, handles serial/USB communication connection

Supported IEC61131-3 languages: LD (래더 다이어그램), 성 (구조화된 텍스트), FBD (기능 블록 다이어그램), SFC (Sequential Function Chart); full SV2 motion instructions, interpolation, high-speed positioning; modular POU programming, simulation, 온라인 모니터링, 펌웨어 업그레이드.

OS: Win7/10/11 (64-조금)

2. WPLSoft (Legacy software for existing project maintenance)

버전: V2.52, traditional Delta DVP programming software, mainly supports ladder diagram and instruction list, no Structured Text support

Suitable for reading backup programs from legacy equipment and simple logic; inferior to ISPSoft for complex motion-control functions.

⚠️ Note: DIADesigner does NOT support DVP28SV11T2. DIADesigner is for high-end SV3, AS/AH series PLCs.

Programming Cables

For the front-panel Mini-DIN8 RS232 port of DVP28SV11T2:

1. Delta original USB-DVP programming cable (USB to Mini-DIN8)
2. RS232-to-Mini-DIN8 cable is also acceptable; program download is available via COM2 RS485 as well.

Software Selection Guidance

서보 포지셔닝, 원형 보간, 복잡한 프로세스: ISP소프트 + COMMGR

Legacy equipment with WPLSoft-format project files: Maintain with WPLSoft.

Communication Protocols for Delta DVP28SV11T2 (SV2)

On-board hardware: COM1-RS232 (Mini-DIN8), COM2-RS485 terminal block. No native Ethernet or CANopen; fieldbus functions require left-side expansion modules.

Protocols Supported by On-board Serial Ports

1. 모드버스 RTU / Modbus ASCII (가장 널리 사용됨)

Available on COM1(RS232) and COM2(RS485); supports both Master and Slave modes

Max baud rate 115200bps; configurable data bits, 둥가, 정지 비트

응용: Connect to HMI, 인버터, 서보, meters and third-party Modbus devices.

2. Delta proprietary protocol (PLCLink)

Data exchange among multiple DVP-SV2/SA2/SS2 PLCs via RS485 networking.

3. Program download protocol

COM1 RS232: ISPSoft/WPLSoft program upload/download, 온라인 모니터링

Program download and monitoring are also supported over COM2 RS485.

Factory default serial parameters: 9600, 7, 이자형, 1 (9600bps, 7-data-bit, even parity, 1 정지 비트)

Additional Fieldbus Protocols via Left-side High-speed Expansion Modules (Hardware add-on only, not built-in)

Use the dedicated left-side high-speed slot with corresponding communication modules:

DVPCOPM-SL: CANopen master module, CANopen DS301 compliant, for CANopen servo/drive connection

DVPNET-SL: 이더넷 모듈, supports Modbus-TCP (Master/Slave)

DVPDP-SL: Profibus-DP slave module

DVPDNM-SL: DeviceNet module

Port Function Summary

일반적인 함정

1. DVP28SV11T2 has no built-in Ethernet or CAN interface. Expansion modules must be purchased separately.
2. COM1(RS232) can only operate as Modbus Slave. Modbus Master function is exclusively for COM2(RS485).
3. PLCLink works only between Delta DVP-series PLCs; incompatible with third-party hardware.

Complete Installation Guide for Delta DVP28SV11T2 (ISP소프트 + COMMGR)

ISPSoft is preferred for DVP28SV11T2(SV2). COMMGR is mandatory for communication; program download will fail without it.

Supported OS: Win10 / Win11 64-bit. Download installation packages from Delta Industrial Automation official website.

설치 전 준비

1. Uninstall old versions of ISPSoft and COMMGR; mixed versions cause communication failures.
2. Right-click installer → Run as administrator (critical for Win11; avoids installation errors and driver failure).
3. Temporarily disable antivirus / Windows Defender to prevent component interception.
4. Ensure .NET Framework4.5 is installed (included in modern Windows; download from Microsoft if missing).

Two Installation Procedures

Method A: COMMGR bundled inside ISPSoft installer (추천)

1. Unzip ISPSoft archive and run Setup.exe.
2. Select Chinese language, follow on-screen prompts; keep the [COMMGR] component checked, do not uncheck it.
3. Customize install path; avoid Chinese-character directories on C drive (예를 들어. 디:\Delta\ISPSoft).
4. Complete installation and reboot PC as prompted.

⚠️ If COMMGR was unchecked during setup, download and install COMMGR separately.

Method B: Separate installation

1. Install COMMGR (Communication Manager) 첫 번째.
2. Install ISPSoft programming software afterwards.

Post-installation Configuration (Program editing ≠ download capability; COMMGR channel setup is required)

1. Close ISPSoft first, launch COMMGR from start menu (icon appears in system tray).
2. Click [추가하다]

Driver name: English characters only, 예를 들어. DVP_SV2 (No Chinese characters or spaces)

Communication type:

Delta USB programming cable: Select USB

USB-to-RS232/485 adapter: Select Serial Port, confirm COM number in Windows Device Manager.

3. Parameters matching PLC factory defaults: 9600, 7, 이자형, 1, 1번 역
4. Confirm configuration, select this channel and click [시작]. Status START means channel is ready.
5. Open ISPSoft, create new project, select model: DVP-SV2 → DVP28SV11T2
6. 메뉴 [도구] → [통신 설정], select the pre-configured COMMGR channel to go online, upload or download programs.

Alternative Legacy Software WPLSoft (For maintenance-only)

Not recommended for new projects; lacks ST language and advanced motion interpolation instructions.

1. Install WPLSoft V2.53, run as administrator.
2. WPLSoft also relies on COMMGR; communication configuration follows identical steps above.

일반적인 문제 해결

1. Gray online button: COMMGR is not running, channel status is not START.
2. COM port not found: Install driver for USB-to-serial chip (CH340 / FT232); no yellow exclamation marks in Device Manager.
3. Win11 installation errors: Always run as administrator, avoid Chinese-character install paths, disable security software temporarily.
4. Communication errors: Double-check baud rate, parity setting and PLC station number. SV2 factory setting: 9600-7-E-1

Hint for New DVP28SV11T2 Project

ISPSoft New Project → Series DVP-SV2 → select DVP28SV11T2. The software automatically applies hardware parameters: 30K-step program capacity, 4-축 200kHz 펄스 출력.