접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지
This is a potentiometer-type axis interface module for 파티 SPC200 series servo positioning controllers, 주문 번호 170228. It is designed to connect potentiometric displacement sensors and proportional valves. 이 제품은 단종되었습니다, and the corresponding models of the SPC11 series are recommended as replacements.
- 모델 코드 설명
| 모델 세그먼트 | 정의 | 설명 |
| SPC | Smart Positioning Controller | Series of smart positioning controllers for pneumatic and electric positioning systems |
| AIF | Axis Interface | Axis interface module for connecting sensors and actuators |
| POT | 전위차계 | Potentiometer type, compatible with potentiometric displacement sensors |
| 170228 | Manufacturer Order Number | Unique official part number of Festo |
- Main Technical Specifications
| 범주 | 기술 데이터 | 비고 |
| 일반 정보 | ||
| 제품 유형 | 축 인터페이스 모듈 | For SPC200 series controllers |
| 주문 번호. | 170228 | Manufacturer part number |
| 무게 | 0.32 kg (대략. 300g) | Slight deviation among different batches |
| 제품상태 | 단종 | No official direct replacement provided by the manufacturer |
| 전기적 매개변수 | ||
| 작동 전압 | DC 24V | Permissible fluctuation: ±25% |
| Maximum Current Consumption | With proportional valve: 1.1에이 | 표준 작동 조건에서 |
| Without proportional valve: 70엄마 | ||
| Input Current Consumption | 4엄마 | For control signal input |
| 정격 출력 전류 | 100채널당 mA | For control signal output |
| 인터페이스 사양 | ||
| Proportional Valve Port | 7-pin M9 circular connector | Standard connection |
| Displacement Sensor Port | Type A cable with connector | Compliant with DIN 43650 기준 |
| AIF IN Port | 5-pin M9 circular connector | Signal input |
| AIF OUT Port | 15-pin Sub-D connector | Signal output |
| 환경 매개변수 | ||
| 작동 온도 | 0…+40℃ | 표준 산업 환경 |
| 보관 온도 | -25…+60℃ | 운송 및 보관용 |
| 상대습도 | 10…95% | 비응축 |
| 보호 등급 | IP20 | For installation inside control cabinets |
- Cross-brand & Old/New Model Replacement List
| 원래 모델 | 교체 모델 | 상표 | 교체 설명 |
| SPC-AIF-POT (170228) | SPC11-POT-LWG (192217) | 파티 | SPC200 series upgraded to SPC11 series, fully compatible in functions |
| SPC11-POT-TLF (192216) | |||
| SPC-AIF-POT (170228) | SPC-AIF-POT-LWG | 파티 | Enhanced version of the same series, suitable for longer-stroke sensors |
| SPC-AIF-POT (170228) | – | Third Party | No fully equivalent alternative available. Festo original upgraded solutions are recommended |
선택 팁: SPC200 for legacy use, SPC11 for new projects; POT stands for potentiometer, LWG/TLF indicates applicable stroke range.
전체 모델 목록 (SPC200 Axis Interface Modules)
| 모델 | 주문 번호. | 센서 유형 | 주요 응용 프로그램 |
| SPC-AIF-POT | 170228 | Potentiometric Displacement Sensor | Pneumatic/electric positioning systems, short-stroke applications |
| SPC-AIF-MTS | 170231 | MTS Magnetostrictive Sensor | High-precision and long-stroke applications |
| SPC-AIF-ANA | 170229 | Analog Sensor (0-10V/4-20mA) | General analog feedback systems |
| SPC-AIF-DIG | 170230 | Digital Sensor | High-speed digital signal feedback systems |
| SPC-AIF-ENC | 170232 | 인코더 | Stepper motor positioning systems |
- 일반적인 결함 & 문제 해결 가이드
| 결함 현상 | 가능한 원인 | 문제 해결 단계 | 솔루션 |
| No signal from sensor | 1. 잘못된 배선 | 1. Check wiring of DIN 43650 포트 | 1. Rewire in accordance with manual |
| 2. Module power failure | 2. Measure DC 24V power supply | 2. Repair power circuit | |
| 3. Damaged sensor | 3. Test sensor resistance with multimeter | 3. Replace the sensor | |
| Proportional valve fails to operate | 1. Poor contact of 7-pin M9 connector | 1. Check connector locking status | 1. Reconnect and lock the connector |
| 2. Insufficient output current | 2. Measure output current (100mA 이하) | 2. Inspect module output circuit | |
| 3. Damaged proportional valve | 3. Test with a spare valve | 3. Replace the proportional valve | |
| Low positioning accuracy | 1. Potentiometer drift | 1. Re-calibrate potentiometer zero point | 1. Run SPC200 calibration procedure |
| 2. Poor module grounding | 2. Check PE connection | 2. Ensure single-point grounding | |
| 3. 신호 간섭 | 3. Add shielding measures | 3. Use shielded cables and ground properly | |
| Abnormal overheating of module | 1. 과부하 운전 | 1. Check current consumption (≤1.1A) | 1. Reduce load or replace with higher-capacity module |
| 2. 통풍이 잘 안됨 | 2. Ensure good ventilation of control cabinet | 2. Improve ventilation conditions | |
| 3. Internal component failure | 3. Measure module temperature | 3. 모듈 교체 |
- 애플리케이션 환경 & 산업 사례
6.1 적용 가능한 시나리오
Pneumatic Positioning System: Combined with SPC200 controller to realize precise positioning of DNCI, DGCI and other cylinders.
Electric Positioning System: Matched with stepper motors for basic point-to-point positioning.
Hybrid Drive System: Featured function of SPC200 series, capable of controlling pneumatic and electric axes simultaneously.
일반 산업 자동화: 자동차, 전자 제품, 식품 포장, handling and assembly industries.
6.2 Not Recommended Scenarios
Ultra-high precision requirements (below ±0.01mm): Replace with SPC-AIF-MTS or SPC11 series.
가혹한 환경 (Protection class higher than IP20 required): Additional protective measures are needed.
Long-stroke applications (>1000mm): Potentiometer will produce larger linearity error; magnetostrictive sensor solution is recommended.
6.3 일반적인 적용 사례
Automotive Component Assembly Line
애플리케이션: Z-axis positioning for robots installing door sealing strips
구성: SPC200/P04 Controller + SPC-AIF-POT (170228) + DNC Cylinder + Potentiometric Sensor
Outcome: Achieves positioning accuracy of ±0.1mm, improves assembly consistency and reduces rework rate.
Electronic Component Testing Equipment
애플리케이션: XY-axis positioning for PCB thickness inspection platform
구성: SPC200/P05 Controller + 2 pcs SPC-AIF-POT Modules + Electric Slide + Potentiometric Sensor
Outcome: Enables fast point movement, cuts testing cycle by 30% and boosts production capacity.
- 설치 & 유지 관리 지침
- 설치 위치: 제어 캐비닛 내부에 설치, keep away from direct sunlight and vibration sources. Reserve a heat dissipation space of ≥50mm.
- 배선 규칙
Separate sensor cables from power cables with a spacing of ≥100mm.
Single-point grounding for shielding layer; grounding at the controller side is preferred.
- Periodic Maintenance
Inspect connector connections and cable aging every 6 개월.
Calibrate potentiometer zero point once a year to guarantee positioning accuracy.
- Upgrade Solution: For system upgrade, replace with SPC11 series controllers and matching interface modules directly. Performance will be increased by 30% with lower maintenance costs.
Practical Application Cases for SPC-AIF-POT (170228)
All cases below adopt the classic solution: Pneumatic closed-loop positioning + MLO-POT potentiometer feedback + MPYE proportional valve + SPC200 controller.
- 자동차 산업: Door / Sunroof Sealing Strip Press-Fitting (High Repeat Accuracy, Short Stroke)
구성
제어 장치: SPC200-P04
Axis Interface: SPC-AIF-POT (170228)
Cylinder: DNCI-32-200-KF (with potentiometer mounting groove)
감지기: MLO-POT-200-TLF (200 mm potentiometer)
Proportional Valve: MPYE-5/3-010 (5/3-position closed center)
Process
Press-fit sealing strips with positioning accuracy of ±0.1 mm. Working sequence: Fast approach → Low-speed pressing → Pressure holding → Retraction.
Outcome
Replaces mechanical stops and limit switches for better consistency and lower rework rate. Stable cycle, suitable for 24-hour continuous production lines.
- 3C Electronics: XY-axis Positioning for PCB Test Bench (Multi-axis, Light Load, High Frequency)
구성 (Dual-axis)
제어 장치: SPC200-P05 (2-axis capable)
Axis Interface: 2 × SPC-AIF-POT (170228)
Slide/Cylinder: DGCI-25-300-KF (horizontally mounted)
감지기: MLO-POT-300-LWG (long-stroke potentiometer)
Proportional Valve: MPYE-5/3-008
Process
Probe bench moves to multiple test points with point positioning accuracy of ±0.15 mm and frequent start-stop operation.
Outcome
Commissioning time reduced by 70% compared with cylinder + mechanical stop solutions. Positions can be adjusted via software. No impact during operation to extend probe service life.
- 음식 & 포장: Carton Folding & Sealing Positioning (저렴한 비용, Medium Accuracy, Dust Environment)
구성
제어 장치: SPC200-P03
Axis Interface: SPC-AIF-POT (170228)
Cylinder: DNC-40-150-PPV
감지기: MLO-POT-150-TLF
Proportional Valve: MPYE-5/2-010
Process
Carton folding and capping with adjustable pressing depth and soft landing to avoid carton damage.
Outcome
Dual control of pressure and position via potentiometer feedback and proportional valve lowers defective rate. Stable long-term operation in dusty environment with IP20 cabinet installation.
- 공작 기계 & 금속 가공: Tailstock Center / Fixture Positioning (Heavy Load, Short Stroke, Force & 위치 제어)
구성
제어 장치: SPC200-P04
Axis Interface: SPC-AIF-POT (170228)
Cylinder: DGPL-63-100-KF (heavy-duty linear drive)
감지기: MLO-POT-100-TLF
Proportional Valve: MPYE-5/3-015 (high flow rate)
Process
Tailstock feeding sequence: Fast forward → Low-speed clamping → Constant force holding → Retraction.
Outcome
SPC200 force and position closed-loop control replaces hydraulic clamping, featuring lower cost and easier maintenance. No oil leakage, ideal for dry machining and low-oil working conditions.
- Injection Molding & Mould: Precision Ejector Pin Control (Synchronous Multi-axis, Anti-sticking)
구성 (3 synchronous axes)
제어 장치: SPC200-P05 + Expansion Module
Axis Interface: 3 × SPC-AIF-POT (170228)
Cylinder: DNCI-25-125-KF
감지기: MLO-POT-125-TLF
Proportional Valve: MPYE-5/3-008
Process
Multi-point ejection with synchronous error less than 0.2 mm to prevent plastic part deformation and mould sticking.
Outcome
Synchronous closed-loop control ensures uniform ejection and fewer defective products. Soft start and soft stop functions reduce impact and mould wear.
- 일반 자동화: Lifting Axis for Handling & Pick-and-Place (Vertical Load, Medium Stroke, Anti-fall)
구성
제어 장치: SPC200-P04
Axis Interface: SPC-AIF-POT (170228)
Cylinder: DGCI-32-500-KF (vertically mounted with locking function)
감지기: MLO-POT-500-LWG
Proportional Valve: MPYE-5/3-010
Process
Lifting and pick-and-place operation with soft landing and position memory, maintaining position after power cut-off.
Outcome
Absolute position feedback by potentiometer eliminates homing after power-on. Stable operation of vertical axis without jitter. Perfect for handling stations with frequent start-stop and multi-position parking.
선택 & 교체 노트 (On-site Application)
SPC-AIF-POT (170228): Matches MLO-POT-…-TLG/TLF, for short and medium strokes with cost advantages.
SPC-AIF-POT-LWG: Matches MLO-POT-…-LWG, for longer strokes up to 1000–2000 mm.
Discontinued Replacement: Prioritize SPC11-POT-L/T (192217/192216) for new projects as direct substitutes for SPC200 system.
