후지 HAKKO MONITOUCH V810iCN-080 저항막 방식 터치스크린 HMI

V810iCN-080, manufactured by Japan Fuji HAKKO Electric. 10.4-inch resistive touch-screen HMI, AC powered, 내장 이더넷, obsolete discontinued model.

-080: Firmware version suffix; hardware base model = V810iCN

1｜Model Decoding V810iCN-080

⚠️V810iCN: No external option unit port; analog resistive touch screen, 8 physical function keys on panel edge.

2｜Core Hardware Specifications

Overall & Cut-out Dimensions

전반적인 차원: 303(여)×231(시간)×62(디) mm

Panel cut-out: 274 × 204 mm

3｜Communication Capabilities

Supports simultaneous communication with up to 8 PLC devices, multi-brand PLC protocols supported; capable of gateway data forwarding.

Programming software: V-SFT (configuration software for V8 series).

Supported functions: 레시피 관리, alarm logging, historical data, CF-card storage, macro script.

4｜Lifecycle & 교체 옵션

✅V8 series is discontinued. V810iCN-080 is an end-of-life spare part, only second-hand / refurbished stock available.

OEM Upgrade Replacement (Fuji HAKKO V9 series)

1. V9100iS-080 (10.4-인치, VGA, AC 전원, cut-out compatible, project conversion required within V-SFT)

메모: V8 project files cannot be directly downloaded to V9 hardware; project migration via software conversion is mandatory.

국내 호환 교체품 (Cut-out reference)

Weinview MT8102iP; Inovance IT7100; FLEXEM FE6100C; MCGS TPC1061Ti.

⚠️Cut-out dimension 274×204 mm: Most standard 10-inch HMIs on market have different cut-out sizes, cabinet modification may be required.

5｜Second-hand Spare-part Inspection Checklist

1. 전원 켜기 테스트: Check backlight for yellowing or flickering; backlight degradation is a common failure.
2. Touch verification: Full-screen touch test, no drift or dead zones.
3. Battery inspection: Built-in coin-cell battery; flat battery causes loss of clock and SRAM recipe data.
4. Full-interface test: 이더넷 포트, two MJ serial ports, D-SUB9 serial port, USB read-write functionality.
5. CF-card slot read-write test.
6. Read firmware version to confirm-080 revision.

6｜Common Faults

1. Touch failure: Damaged touch panel; touch glass can be replaced independently.
2. Black screen at power-up: Power-board fault or LED backlight damage.
3. Time reset: Depleted backup lithium coin battery.
4. CF-card read-write failure: Poor contact of card slot.
5. 불안정한 통신: Oxidation of MJ connectors, high-failure-rate interface.

Fuji HAKKO MONITOUCH V8 Series HMI Full Model List

V8 series discontinued in 2017, programming software: V-SFT; suffix definition: N=AC100-240V AC supply, D=DC24V DC supply, i=built-in Ethernet port.

접미사-0XX indicates firmware version (e.g.-080), not part of hardware model designation.

모델 코드 정의

Full Series Grouped by Screen Size

5.7-inch｜QVGA 320×240｜DC24V(디) power only

V806 series, no AC variants

V806MD: Monochrome display, 이더넷 없음

V806iMD: Monochrome display, 내장 이더넷

V806CD: STN color, 이더넷 없음

V806iCD: STN color, 내장 이더넷

V806TD: TFT color, 이더넷 없음

V806iTD: TFT color, 내장 이더넷

7.5-inch Handheld Unit｜VGA 640×480｜With Dead-man Safety Enable Switch

V808CH: Handheld, 이더넷 없음

V808iCH: Handheld, 내장 이더넷

DC24V power supply only

8.4-inch｜800×600(SVGA)/640×480(VGA), 교류(N)/DC(디) power options

SVGA(800×600):

V808SDN (교류) / V808SD (DC)

V808iSDN (교류) / V808iSD (DC)

VGA(640×480):

V808CDN (교류) / V808CD (DC)

V808iCDN (교류) / V808iCD (DC)

10.4-inch｜V810 Series (V810iCN-080 belongs to this family)

SVGA 800×600

V810SN (교류) / V810S (DC)

V810iSN (교류) / V810iS (DC)

VGA 640×480 C-type (Standard TFT)

V810CN (교류) / V810C (DC)

V810iCN (교류) / V810iC (DC)👉 Base hardware unit of your model

VGA 640×480 T-type (RGB/video option module support)

V810TN (교류) / V810T (DC)

V810iTN (교류) / V810iT (DC)

Matrix-touch variants available (V810iTM-N, V810TM-N etc.), rarely deployed in industry.

12.1-inch SVGA 800×600

V812SN (교류) / V812S (DC)

V812iSN (교류) / V812iS (DC)

15-inch XGA 1024×768 (Flagship Model)

V815iXN (교류) / V815iX (DC)👉V815 only available with Ethernet “나” 버전

빠른 선택 참조

1. 와 함께 “나” = On-board RJ45 Ethernet; no “나” = No Ethernet interface
2. Suffix N = AC100-240V; Suffix D = DC24V
3. V806 & V808CH series: DC24V 전용, no AC models
4. -080,-070: Firmware revision only, hardware remains unchanged. 예: V810iCN-080 = V810iCN hardware + 080 firmware.

OEM Direct Replacement (V9 시리즈)

V8 project files cannot be directly downloaded to V9 hardware; perform project conversion within software for migration.

Common Second-hand Unit Failure Patterns

1. Resistive touch aging: Touch drift or partial non-response
2. Depleted internal lithium coin-cell: Loss of real-time clock and SRAM recipe data
3. Oxidation of MJ-8P serial connectors leading to unstable communication
4. LED backlight ageing: Yellowing and dim display

Application Scenarios for Fuji HAKKO MONITOUCH V806iMD

V806iMD: 5.7-인치, 16-level grayscale monochrome STN display, QVGA 320×240, DC24V 전원 공급 장치, “나” for built-in Ethernet, multi-serial ports (D-SUB9 + dual MJ-8P), 512KB 스램, resistive touch; discontinued hardware, programming software V-SFT.

Key strengths: Monochrome grayscale, 낮은 전력 소비, good sunlight readability, Ethernet plus multi-serial ports. Suited for equipment without demand for complex color graphics yet requiring network data upload. Compared with V806MD, integrated Ethernet enables data upload, SCADA host connection and multi-device gateway functions.

Key Feature-Driven Application Attributes

1. 16-level monochrome grayscale: Optimized for text, numeric values and simple bar graphs; not suitable for complex color diagrams or process flowcharts; superior sunlight legibility versus early-generation color STN HMIs.
2. 내장 이더넷: PLC data upload, alarm notification upload, multi-PLC gateway functions; V806MD (non-i variant) supports serial communication only.
3. Three serial communication channels: D-SUB9 + MJ1/MJ2, connect multiple PLCs, temperature controllers and inverters simultaneously; 최대 8 external devices concurrent communication.
4. DC24V supply: Direct power from cabinet 24VDC system, no AC power circuit required.
5. IP65 front panel for cabinet panel mounting; CF-card & USB support for recipe storage, alarm logging and data sampling.

Typical Industries & Equipment Use-cases

1｜Stand-alone Compact Machinery (Local Operator Panel)

Priority on parameter setup, status monitoring and alarm viewing; complex color visuals not required

Auxiliary injection-molding equipment, 건조기, 믹서, 블렌더

Compact packaging machines: sealers, small filling machines, 라벨러

Press equipment, compact presses, simple tooling fixtures

섬유기계: 와인딩 머신, compact textile finishing equipment

기능: 매개변수 구성, production counting, fault alarm display, simple recipe recall; Ethernet transmits production figures and alarm events to plant-level host system.

2｜Thermal & Temperature-controlled Equipment

Industrial furnaces, 오븐, small heat-treatment furnaces, reflow ovens, curing furnaces

Environmental test chambers, constant temperature & humidity cabinets

장점: Good visibility under strong workshop lighting; multi-serial ports connect PLC plus multiple temperature controllers concurrently; Ethernet uploads temperature trends and alarms to central control.

3｜Water-treatment, 환경 & Fluid-handling Compact Control Cabinets

Small-scale wastewater equipment, water reclamation, chemical dosing control systems

Local pump-station control cabinets, compact water-purification units

Use-case: Local panel monitoring for pump-valve status, liquid level and flow readings; alarm event logging; Ethernet connects to plant SCADA for data acquisition, no complex color flow charts needed.

4｜Workstation Nodes & Auxiliary Stations on Production Lines

Stand-alone workstation controllers on conveyor lines, sorting auxiliary panels

Local control units for material handling conveyors

Single V806iMD connects multiple sub-station PLCs via multi-serial ports, performs data exchange via gateway function, accesses factory LAN through Ethernet.

5｜Machinery & Container-mounted Control Cabinets (DC24V System)

Vehicle-mounted industrial equipment, mobile packaged units; container-type compact system control cabinets

Direct compatibility with 24V on-board power supply; IP65 front-panel withstands dust and vibration; good readability under bright ambient light.

6｜Retrofit & Spare-part Replacement for Legacy Installations

Replacement of failed original V806iMD on existing machines.

⚠️Avoid arbitrary substitution with color HMIs: Cabinet cut-out dimension 289 × 216.2 mm; most 5.7-inch third-party HMIs feature different cut-out dimensions, cabinet machining modification is required.

❌Unsuitable Applications for V806iMD

1. Projects requiring extensive color process flowcharts, animations and image display; select V806iCD / V806iTD color variants instead.
2. Applications requiring high-definition color trend curves and sophisticated visualization.
3. Severe high-humidity and corrosive environments (enclosed protective cabinet required).

V806iMD vs V806MD Selection Comparison

OEM Replacement Model

Legacy V806iMD discontinued; recommended OEM successor: TS2060i (5.7-인치, cut-out compatible, DC24V, on-board Ethernet, color display; V-SFT project conversion and migration required).