접촉기,회로 차단기,감지기,인코더,PLC,변환기
성명: 하니웰 UDC120L10001000, a UDC1200 Micro-Pro 1/16 에서 Limit Controller. It is not a conventional PID temperature controller. It is designed for safety over-limit protection with latching alarm function.
- Model Code Decoding: DC120L 10001000
DC120L: UDC1200 series Limit Controller (differentiated from DC1201/1202 conventional PID controllers)
1: 메인 출력 1, SPDT Relay
0: No auxiliary output
0: 통신 없음
1: Universal Power Supply 90–264VAC (50/60헤르츠)
0: No second output
0: No optional extras
0: No additional alarm
- 핵심사양
| 목 | 매개변수 |
| 전반적인 차원 | 48×48×110 mm (1/16 에서) |
| 패널 컷아웃 | 45×45 mm |
| 전원공급장치 | 90~264V AC, 50/60헤르츠, Power Consumption ≤4W |
| 입력 | Universal Input: Thermocouple K/J/R/S/B/E/N/T; Pt100 RTD; 4-20mA linear signal |
| 정확성 | 0.1% of full scale ±1 LSD |
| 메인 출력 | SPDT Relay, Contact Rating 3A@240VAC |
| 샘플링 기간 | 250ms |
| 표시하다 | Dual 4-digit LED, simultaneous PV/SP display + status LED |
| 무게 | 맥스. 210g |
| 인증 | CE, RoHS 규제 |
- 주요 기능 (Main Differences Between Limit Controller & Normal PID Controller)
- Over-limit Latching Protection: When the measured value exceeds the set limit value, the relay actuates and latches. Manual reset is required for recovery. Applied for over-temperature safety cut-off of ovens, furnaces and heat treatment equipment (safety temperature limiter).
- Universal sensor input supporting thermocouples, RTDs and analog signals.
- Sensor break detection: TC/RTD break triggers alarm output.
- Password-protected parameters to prevent unauthorized modification of limit values on site.
- No PID automatic regulation. Only upper / lower limit safety protection (cannot be used for continuous temperature regulation).
- 일반적인 애플리케이션 시나리오
Over-temperature safety protection loops for industrial ovens, heat treatment furnaces, aging test chambers, environmental chambers, boiler auxiliaries, plastic extruders and food baking equipment. Often used together with conventional PID temperature controllers (PID controller handles regulation; DC120L serves as independent safety temperature limiting).
- 설치 & 배선 지침
- Panel snap-in mounting, max panel thickness 6mm; keep heat dissipation gaps front and rear.
- Relay contacts are dry contacts with external load power supply. Do NOT connect high voltage to instrument internal terminals.
- Route sensor cables separately away from power cables to reduce interference.
- Unlock via password before commissioning to modify temperature limits. Manual key reset is required after latch activation.
- 대안 / Optional Models
- 같은 시리즈: Other DC120L suffix versions (DC120L10011000 with RS485 communication)
- 국내 대안: Yudian AI series limit controllers, Hongrun NHR-1100 (유사한 기능, latch logic needs verification)
- Legacy Honeywell replacement: DC1000 series limit type (gradually phased out)
- 일반적인 문제 해결
Sensor error displayed: Check TC/RTD polarity, wire breakage and cold junction compensation.
No latch after over-limit: Confirm function mode is set to Limit latch mode instead of ordinary alarm mode.
Relay fails to actuate: Verify contact load rating, terminal wiring and instrument power supply.
Parameters cannot be modified: Instrument password locked, enter unlock password.
- HS Code Reference (For Foreign Trade)
9032890090 Other automatic regulating or controlling instruments and apparatus
비교표: Honeywell DC120L (UDC120L10001000) vs UDC1202 PID Temperature Controller
| 비교항목 | DC120L (Limit Controller) | UDC1202 (PID Process Controller) |
| 코어 포지셔닝 | Safety over-limit protection instrument (independent safety temperature limiting) | Process temperature automatic regulation instrument (main temperature control) |
| Control Algorithm | No PID algorithm, only limit logic; Over-limit Latch function | PID/PD/On-off / Three-position stepping valve control; Auto-tune supported |
| Latch Function | ✅ Standard: Relay latches after over-limit actuation, manual reset mandatory for release (safety cut-off) | ❌ Ordinary alarm without latch; output recovers automatically once temperature drops |
| Output Function | Output for safety cut-off only, no continuous regulation | Main output for continuous temperature control: 계전기 / SSR / 4-20mA 아날로그 출력 |
| 전반적인 차원 | 48×48mm, 1/16 에서, panel cutout 45×45mm | 48×48mm, 1/16 에서, panel cutout 45×45mm (fully interchangeable for panel mounting) |
| Universal Input | ✅ Thermocouple, Pt100, 4-20mA linear signal | ✅ Thermocouple, Pt100, 4-20mA linear signal |
| 전원공급장치 | 90~264VAC wide range | 90~264VAC wide range |
| 정확성 | 0.1% of full scale ±1 LSD | 0.1% of full scale ±1 LSD |
| 일반적인 사용법 | Over-temperature safety protection for ovens, heat treatment furnaces and test chambers, independent safety loop (safety redundancy) | Closed-loop regulation of normal process temperature to maintain setpoint |
| Combination Application | Used with PID controller: UDC1202 for main temperature control, DC120L as secondary independent safety protection | Sole unit for automatic temperature control; not responsible for safety temperature limiting |
| 수동 / Auto Mode | No manual/auto control mode, only limit value setting | Automatic PID regulation, manual output, manual/auto switch available |
| Alarm Types | Only over-limit safety latch alarm | Upper limit, 하한, 편차, band alarms and more configurable alarm types |
| Communication Option | RS485 Modbus optional (this DC120L10001000 unit has no communication) | RS485 Modbus optional |
| 선택 포인트 | Applications requiring independent temperature limit loop and latching trip per safety specifications | Conventional temperature control scenarios requiring automatic constant temperature closed-loop regulation |
| Important Remarks | Cannot replace PID controller for temperature regulation, safety protection only | Cannot replace safety limit instrument; non-latching alarm fails safety requirements for some equipment |
Selection Recommendation Summary
- Equipment requiring safety redundancy, hard over-temperature cut-off and fault latching: Dual-instrument scheme: UDC1202 (main temperature control) + DC120L (independent temperature limit) (widely used for heat treatment, ovens and aging chambers)
- Only conventional constant temperature control required with no mandatory safety latch requirement: Select UDC1202 directly
- Only over-temperature protection required without automatic temperature control: Select DC120L alone
Honeywell DC120L10001000 (UDC120L Limit Controller) 기술문서
Product Full Name: Honeywell UDC1200 Micro-Pro DC120L Limit Controller
Document Type: 데이터시트 / Technical Specification Manual (English Engineering Version)
적용 가능한 모델: DC120L10001000 (릴레이 출력, No Communication, 90~264VAC Power Supply)
제품 포지셔닝: Independent safety limit instrument, no PID regulation, over-limit latching trip, applied for equipment over-temperature safety protection
- Model Code Definition DC120L 1 0 0 1 0 0 0
| 코드 세그먼트 | 설명 | Configuration of This Model |
| DC120L | UDC1200 series Limit Controller | Limit type, no PID algorithm |
| 1세인트 자리 1 | Main Output Type | 1=SPDT Relay Output |
| 2네 번째 자리 0 | 보조 출력 | 0=No auxiliary output |
| 3세 번째 자리 0 | Communication Option | 0=No RS485 Modbus communication |
| 4번째 자리 1 | Power Supply Specification | 1=Universal AC 90~264VAC, 50/60헤르츠 |
| 5번째 자리 0 | Second Output | 0=No second output |
| 6번째 자리 0 | 선택적 기능 | 0=No optional extras |
| 7번째 자리 0 | Alarm Option | 0=No additional alarm output |
- 전기 같은 & 기계 사양
| 목 | 값 | 비고 |
| 전반적인 차원 | 48mm × 48mm × 110mm | 1/16 DIN panel mount |
| 패널 컷아웃 | 45mm × 45mm | Max panel thickness 6mm |
| 전원공급장치 | 90~264V AC, 50/60헤르츠 | Wide-range universal AC supply |
| 전력 소비 | ≤4W | 낮은 전력 소비 |
| 무게 | ≤210g | |
| 샘플링 기간 | 250ms (4 초당 횟수) | |
| 측정 정확도 | 0.1% of full scale ±1 LSD | Cold junction compensation ±1℃ for thermocouples |
| 입력 임피던스 | >10MΩ (TC/RTD); 5오 (4-20엄마) | |
| 메인 출력 | SPDT Relay, 3A@240VAC | Dry passive contacts |
| 인증 | CE, RoHS 규제 | Industrial certifications |
| Sensor Break Detection | TC / RTD / 4-20mA break diagnosis supported | Breakage triggers limit action |
Universal Input Types (Supported Sensors)
열전대: 케이, 제이, 아르 자형, 에스, 비, 이자형, N, 티
RTD: Pt100 (DIN43760 0.00385)
Linear Analog: 4~20mA, 0~20mA, 0~10V, 1~5V
- Core Function Description
- Limit Latch Protection【Core Feature】
When measured PV exceeds setpoint SP, relay actuates and latches in trip state. No automatic recovery upon temperature drop; manual key reset required. Meets hard cut-off safety requirements for ovens and heat treatment furnaces.
Configurable for high limit or low limit mode.
- Sensor Break Diagnosis
Breakage of thermocouple, RTD or 4-20mA signal triggers limit output action to prevent runaway caused by sensor failure.
- Parameter Password Lock
Parameter menu protected by password to prevent unauthorized modification of safety limit values. Password unlock required to edit SP, input type and latch mode.
- Dual 4-digit LED Display
Upper screen: PV real-time measured value; Lower screen: SP set limit value. Status LED indicates output/alarm/latch status.
- No PID Automatic Control
This instrument has no PID regulation function and cannot act as primary temperature controller. It serves only for independent safety over-limit protection, forming dual-loop safety temperature control system when paired with UDC1202 PID controller.
- Terminal Wiring Definition (DC120L Basic Version)
중요사항: Relay contacts are passive dry contacts. Do NOT connect load power supply to instrument internal power terminals.
- 엘, N: Instrument power supply, 90~264VAC
- Sensor input terminals: 열전대 / Pt100 / 4-20엄마
- Main output relay: COM common, NO 평상시 열림, NC 상시 폐쇄
Typical wiring: Use NC normally closed contact. Contact closes under normal temperature; opens upon over-temperature latch to cut heating circuit.
Wiring Recommendation: Use shielded twisted pair for sensor cables, routed separately from power cables to reduce interference.
- 설치사양
- Panel snap mounting, max panel thickness 6mm; reserve heat dissipation gap for side-by-side multi-unit installation.
- 작동 주변 온도: 0~50℃; ambient humidity: 20~80%RH, no condensation and corrosive gas.
- Keep away from high-power contactors, frequency converters and strong electromagnetic interference sources.
- 접지: Instrument chassis grounding; single-end grounding for shield layer.
- 작업 & Configuration Overview
6.1 Enter Parameter Menu
Press 【UP】+【SETUP】 simultaneously, 비밀번호를 입력하세요 (common password:10/20) to unlock and enter configuration mode.
6.2 Key Configurable Parameters
Input type code (sensor model selection)
Full scale upper/lower range
Limit SP (safety protection threshold)
Limit mode: high limit latch / low limit latch
Latch enable/disable
Action logic for sensor break
Password setting & parameter locking
6.3 Latch Reset
After over-limit latch trip, perform manual reset via keys on operator interface to restore relay contacts to normal state.
- 일반적인 애플리케이션 시나리오
Independent over-temperature safety protection loops for industrial ovens, hot air furnaces, heat treatment furnaces, aging test chambers, environmental chambers, plastic extruders and food baking equipment.
Standard scheme: UDC1202 (PID main temperature control) + DC120L (independent temperature limit protection) dual-instrument redundant control complying with equipment safety standards.
- 고장 진단표
| 결함 현상 | 문제 해결 방향 |
| Sensor error displayed | Check sensor wiring polarity and breakage; verify input code matches sensor; check shield grounding |
| No latch after over-limit | Confirm Latch function enabled in parameters; confirm limit mode instead of ordinary alarm mode |
| Relay fails to actuate | Check contact load rating; verify COM/NO/NC relay wiring; confirm instrument power supply |
| Parameters cannot be modified | Instrument password locked, input unlock password; confirm not in read-only mode |
| Reading drift | Separate sensor cables from power cables; 접지를 확인하세요; verify cold junction compensation for TC |
- Alternative Model Information
Same Honeywell series: DC120L10011000 (version with RS485 communication)
국내 대안: Yudian AI series limit controllers, Hongrun NHR-1100 (latch logic requires verification)
레거시 교체: DC1000 series limit controller (단종)
- HS Code for Foreign Trade
HS코드: 9032890090 Other automatic regulating or controlling instruments and apparatus
- 안전 참고사항
- This instrument is a safety limit protection device, cannot be used alone for process temperature control.
- External contactor is recommended for safety circuit. Relay contact capacity is limited and cannot directly drive high-power heating loads.
- Periodic over-temperature test on safety circuit is required to verify latch trip function.
- Disconnect power before instrument disassembly and wiring, comply with local electrical safety regulations.
