오후-010-REA01-E-ZVG/US
PM1704 belongs to IFM PM17 series, a flush diaphragm hygienic pressure transmitter, designed for hygienic processes in food & 음료, 제약, bioengineering industries with CIP/SIP cleaning requirements.
✅ 모델 코드 정의
오후: 압력 트랜스미터, hygienic flush diaphragm series
010: Measuring range 0~10 bar (gauge pressure, adjustable downward)
REA01: Aseptoflex Vario G1 external thread hygienic process connection
이자형: Equipped with IO-Link communication
ZVG/US: M12 커넥터 버전
📊 Core Technical Specifications
| 목 | 사양 |
| 측정 범위 | -1 … 10 술집 (-0.1~1 MPa, gauge pressure), factory setting 0~10 bar |
| 산출 | 4…20 mA analog + 1 스위칭 출력 + IO-링크 |
| 정확성 | ≤±0.2% FS (including linearity & 히스테리시스); repeatability <±0.1%FS |
| 중간온도 | -25 … +150 ℃ (compatible with SIP high-temperature sterilization) |
| 주변 온도 | -25 … +85 ℃ |
| 전원공급장치 | DC 18 ~ 30 다섯, 역 극성 보호 |
| 프로세스 연결 | G1″ male thread with Aseptoflex Vario hygienic sealing |
| Wetted Parts Material | 횡격막: 99.9% 알루미나 세라믹; 젖은 하우징: 1.4435 (316엘) 스테인레스 스틸 |
| 전기 연결 | M12 A코드, 4-핀 금도금 커넥터 |
| 보호 등급 | IP67 / IP69K (고압 스프레이 청소에 적합) |
| 지나친 압력 | 15 술집; 파열 압력 30 술집 |
| 서비스 수명 | ≥1억 압력 주기 |
| 조임 토크 | 35 Nm |
| 무게 | 대략. 308 g |
📜 인증 (위생 준수)
에헤지, 3-에이, FDA, EC1935/2004, ACS, cULus, UKCA, 식품 및 제약 산업의 위생 요구 사항 충족.
🛠️ 제품 특징
- 플러시 데드스페이스 없는 다이어프램: 미디어를 트랩할 수 있는 공간 없음, 점성 재료에 적합 (잼, 요구르트, 제약 액체) CIP/SIP 세척용.
- IO-링크: 압력 읽기, 온도 및 진단 데이터; 4-20mA 범위의 원격 스케일링, 결함 경보.
- 세척용 화학물질에 대한 내성, IP69K에 따른 고압 세척을 견딜 수 있음.
- 맞춤형 스위치 포인트; IO-Link를 통해 자유롭게 조정 가능한 아날로그 측정 범위 (턴다운 구성 가능).
🧩 일반적인 응용 프로그램
식품의 탱크 압력 측정 & 음료, 발효기, 약제 준비 탱크, 유화 공정, 위생적인 파이프라인 압력 측정.
⚠️ 설치 & 유지보수 노트
- 조임 토크는 다음으로 엄격히 제한됩니다. 35 Nm; 과도한 토크로 인해 세라믹 다이어프램이 깨질 수 있습니다..
- 단단한 물체로 다이어프램을 두드리지 마십시오.; 플러시 표면은 물질 축적을 방지하기 위해 탱크 내부 벽과 수평을 이루어야 합니다..
- CIP/SIP 중 가열 및 냉각 속도는 열충격으로 인한 손상을 방지하기 위해 너무 빠르지 않아야 합니다. 감지기.
- 옵션 액세서리: Aseptoflex 용접 어댑터, 교정 증명서, M12 케이블, 교체 씰링 개스킷.
🔁 대체 모델 참조
PM1604: 동일한 측정 범위, 비 Aseptoflex 인터페이스, 표준 G1 스레드 (Vario 위생 씰 없음)
PI1704: 동일한 인터페이스 및 범위, 온도 측정 기능 내장 (PM1704는 매체 온도를 측정하지 않습니다.)
PM1705: -1…4바; PM1714: 0…16바 (같은 시리즈, 다양한 측정 범위)
❗ 일반적인 문제 해결
- 4-20mA는 풀 스케일로 고정됨: 다이어프램 손상 / 지나친 압력, 배선 단락.
- 드리프트 읽기: 오래된 밀봉 링, 열충격, 다이어프램 표면에 중간 정도의 결정 침전물.
- IO-Link 통신 실패: 공급 전압이 부족함, 산화된 M12 핀, IO-Link 마스터의 잘못된 전송 속도 구성.
IFM PM17 Series Hygienic Flush Diaphragm Pressure Transmitter
PM17 is IFM’s Aseptoflex Vario hygienic interface flush pressure transmitter for food, pharmaceutical and bioengineering industries. It adopts ceramic capacitive sensing element, supports CIP/SIP in-place cleaning and sterilization, and features IO-Link digital communication. It is the main product for pressure measurement on hygienic tanks and pipelines.
- Core Design Principle
- Flush dead-space-free ceramic diaphragm: 99.9% alumina ceramic wetted diaphragm without recess dead zone, prevents buildup of viscous materials and pharmaceutical liquids. The diaphragm resists vacuum impact and corrosive media. Wetted housing is made of 1.4435 (316엘) stainless steel with surface finish meeting hygienic requirements.
- Aseptoflex Vario modular interface: Unified G1 male thread on sensor body. It can be fitted with various hygienic adapters to quickly convert to Tri-clamp, Varivent or welding base. Common sensor body reduces spare part inventory, max tightening torque 35 Nm.
- Ceramic capacitive measuring cell: Good long-term stability and overpressure resistance. Overall accuracy ≤±0.2%FS (linearity + 히스테리시스), repeatability <±0.1%FS, optimized temperature compensation for rapid temperature change during CIP/SIP.
- 일반 기술 사양 (Common for the whole series)
| 목 | 사양 |
| 전원공급장치 | DC 18~30V, built-in reverse polarity protection |
| 산출 | 4…20mA scalable analog + 1 PNP 스위칭 출력 + IO-링크 |
| 중간온도 | -25~125℃ continuous; short-time peak 150℃ (max 1h for SIP sterilization) |
| 주변 온도 | -25~85℃ |
| 전기 커넥터 | M12 A-coded 4-pin gold-plated connector |
| 보호 등급 | IP67 / IP69K, withstand high-pressure spray cleaning |
| Wetted Parts Material | 횡격막: 99.9% Al₂O₃ ceramic; 주택: 1.4435 (316엘) 스테인레스 스틸; 밀봉하다: EPDM |
| Zero Calibration | On-device push-button teach or remote zero calibration via IO-Link |
| Additional Data | IO-Link can read sensor housing temperature and diagnostic information |
- Popular Models & Measuring Ranges (PM17 Series)
PM1704: -1 … 10 술집 (계량기)
PM1705: -1 … 4 술집 (계량기)
PM1707: -0.05 … 1 술집 (-50~1000 mbar)
PM1708: -0.01 … 0.1 술집 (-10~100 mbar, 저기압)
PM1714: 0 … 16 술집 (계량기)
PM1717: -0.1 … 1.6 술집
PM1718: Low pressure version (inH₂O unit)
PM1789: Ultra-low pressure (inH₂O, suitable for hydrostatic tank level measurement)
모델 명명 규칙: `PM-Range-REA01-E-ZVG/US`
REA01: G1 Aseptoflex Vario hygienic interface
이자형: IO-Link enabled
ZVG/US: M12 4핀 커넥터
- Hygiene Certifications
에헤지, 3-에이, FDA, EC1935/2004, ACS, cULus, UKCA; factory calibration certificate available for free download online.
- 제품 장점
✅ Modular hygienic adapter system: One sensor body can be fitted with different process adapters for multiple hygienic connections, easier project selection and spare parts management.
✅ Multi-function IO-Link: Remote scaling of 4-20mA range, set switch points, read pressure/temperature, 결함 진단, 매개변수 백업; less interference compared with analog signals.
✅ Flush diaphragm without dead volume: Suitable for yoghurt, 잼, suspension liquid and fermentation broth; no residual dead space for CIP cleaning.
✅ IP69K 고압 세척: 일상적인 식품 공장 위생을 위해 센서 하우징을 세척액으로 직접 세척할 수 있습니다..
✅ 긴 서비스 수명: 스위치 용량 최대 100 백만 압력 사이클, 드리프트가 최소화된 세라믹 셀.
- 일반적인 애플리케이션 시나리오
식품의 원료탱크 및 발효탱크 & 음료, 유화 공정; 의약품 준비 시스템, 정화된 물 파이프라인; 생물반응기; 위생적인 파이프라인 압력 및 정수압 레벨 측정.
- 설치 & 유지보수 노트
- 최대 조임 토크 35 Nm. 과도한 토크로 인해 세라믹 다이어프램이 깨질 수 있습니다..
- 다이어프램을 긁거나 부딪치지 마십시오.; 설치 후, 다이어프램 표면은 재료 축적을 방지하기 위해 탱크 내벽과 같은 높이여야 합니다..
- 세라믹 부품의 열 충격 손상을 방지하기 위해 SIP 멸균 중에 급격한 가열/냉각을 피하십시오..
- EPDM 씰 노화를 주기적으로 검사하십시오.; 중간 결정화 또는 재료 접착으로 인해 압력 드리프트가 발생하는 경우 다이어프램 표면을 청소하십시오..
- 유사한 시리즈와의 비교
- PM17 대 PM16: PM17 = Aseptoflex Vario 위생 모듈형 G1; PM16 = Vario 위생 씰링이 없는 표준 G1 스레드, 낮은 위생 등급.
- PM17 대 PI17: PI17은 동일한 인터페이스를 공유하고 중간 온도 측정을 지원합니다.; PM17은 센서 하우징 온도만 읽을 수 있습니다., 중간 온도를 측정할 수 없습니다.
- PM17: 압력 트랜스미터; PM11: 통합형 트라이 클램프 버전 (Vario 어댑터 시스템 제외).
- 일반적인 결함
- 4-20mA가 최대 규모로 멈췄습니다.: 과부하로 인한 다이어프램 파열, 배선 단락.
- 느린 압력 드리프트: 오래된 밀봉 링, 다이어프램에 중간 정도의 결정 침전물, 반복되는 극심한 열충격.
- IO-Link 통신 실패: 전원 공급 부족, 산화된 M12 핀, IO-Link 마스터의 잘못된 전송 속도 설정.
IFM PM17 시리즈 위생용 압력 센서의 적용 사례
PM17의 핵심 강점: 플러시 데드 스페이스 프리 디자인, Aseptoflex Vario 모듈형 위생 인터페이스, CIP/SIP 호환성, IO-링크, IP69K. All cases are for hygienic processes in food & 음료, pharmaceutical and bio-industry, for tank pressure, pipeline pressure and hydrostatic level measurement.
사례 1: Dairy Plant – Pressure & Hydrostatic Level on Yogurt / Cream Batching Tank
선택한 모델: PM1704 (-1~10바)
근무 조건: Viscous yoghurt and cream tend to stick and accumulate. Tanks undergo daily CIP cleaning and periodic SIP steam sterilization (135~150℃).
설치: G1 Aseptoflex Vario + welding base, flush diaphragm level with tank inner wall, no dead space for medium retention.
Measurement Target: Vapor phase pressure monitoring inside tank + continuous hydrostatic liquid level calculation. 4-20mA signal to PLC, remote zero calibration via IO-Link.
해결된 문제점:
- Traditional sensors with pressure port trap milk residue and cause drift; PM17 flush ceramic diaphragm leaves no residue after CIP cleaning.
- PM17 is compensated for rapid temperature variation during SIP thermal cycling, maintaining accuracy ≤±0.2%FS.
- IO-Link reads sensor diagnostics to detect seal aging and diaphragm crystallization in advance, 다운타임 감소.
Interlock Logic: High tank pressure alarm, vacuum protection, high/low level interlock for feed/discharge valves.
사례 2: Beer Brewing – Fermenter Tank Pressure Monitoring
선택한 모델: PM1705 (-1~4 bar)
근무 조건: CO₂ generated during fermentation; stable slight positive pressure inside tank required. Periodic CIP spray cleaning.
Measurement Target: Maintain constant head pressure of fermenter to suppress microbes and control fermentation rate.
하이라이트:
Ceramic diaphragm withstands vacuum impact during exhaust evacuation without damage. Aseptoflex adapter can be quickly replaced; same sensor body can switch to Tri-clamp base.
메모: If both pressure AND medium temperature measurement are required, select PI17 series with same interface; PM17 only reads housing temperature.
사례 3: Pharmaceutical Formulation System (Biopharma / Injectable Preparation Tank)
선택한 모델: PM1717 (-0.1~1.6 bar)
근무 조건: Aseptic formulation tank, buffer preparation tank, SIP 121℃ steam sterilization, 중간: pharmaceutical liquid, purified water, high cleanliness requirement.
규정 준수: 에헤지, 3-에이, FDA, EC1935/2004 certifications, factory calibration certificate downloadable online for GMP audit trail.
애플리케이션: Tank pressure monitoring, vacuum leak test, hydrostatic level; IO-Link parameter backup, traceable batch data.
주요 이점: Wetted parts:1.4435 스테인레스 스틸 + 알루미나 세라믹, no silicone fill fluid to eliminate risk of pharmaceutical contamination. IP69K for high-pressure workshop washdown.
사례 4: CIP Differential Pressure Protection for Food Heat Exchanger (Dairy UHT Ultra-high Temperature Sterilization)
선택한 모델: PM1704
프로세스: Plate heat exchanger for UHT. 매체 누출로 인한 교차 오염을 방지하려면 제품 측 압력이 열 매체 측 압력보다 높아야 합니다..
해결책: 제품 파이프라인과 열매체 파이프라인에 각각 PM17 센서 2개 장착; PLC가 차압을 계산합니다..
인터록: 제품 측 압력이 임계값 아래로 떨어지면 자동으로 피드를 차단하고 알람을 트리거합니다., 전체 생산 배치 보호.
이점: 세라믹 감지 셀은 수격 충격에 저항합니다.; 빠른 밸브 전환으로 인한 순간적인 압력 스파이크로 인해 영구적인 제로 드리프트가 발생하지 않습니다..
사례 5: 과일 주스 / 잼 생산 – 고고형 점성 매체를 위한 파이프라인 압력
선택한 모델: PM1704
근무 조건: 농축된 잼, 과일 입자가 있는 과일 펄프, 임펄스 라인이 막히기 쉽습니다..
어려움: 기존 압력 트랜스미터는 충격 구멍이 과일 펄프로 쉽게 막혀 자주 분해해야 합니다. & 청소.
PM17 솔루션: Flush diaphragm contacts medium directly, no impulse dead cavity, solid particles cannot get stuck. IP69K, pipeline outer wall can be high-pressure washed.
Monitoring Target: Screw pump outlet pressure, pipeline blockage detection; pump protection triggered by pressure rise.
사례 6: 정제수 / WFI Pipeline Pressure Monitoring (Pharmaceutical Water System)
선택한 모델: PM1707 (-0.05~1 bar, low pressure range)
근무 조건: Low-pressure continuous circulation of WFI water for injection, requires high accuracy low pressure measurement.
특징: Low-range PM1707 suitable for low-pressure clean water loop; ceramic diaphragm resists purified water corrosion with no leaching risk.
사례 7: Bioreactor (Cell Culture Tank)
선택한 모델: PM1717
근무 조건: Slight positive pressure inside tank to prevent microbial ingress; periodic SIP sterilization.
용법: Tank pressure regulation, 과압 보호, hydrostatic liquid level; IO-Link upload pressure and sensor diagnostic status to SCADA.
✅ 선택 & 애플리케이션 매칭 테이블
| 응용 시나리오 | 추천 모델 | 주요 이유 |
| Batching tanks, viscous media like jam & 요구르트 | PM1704 | -1~10 bar range, flush diaphragm prevents material buildup |
| Slight positive pressure in beer fermenters | PM1705 | -1~4 bar, vacuum impact resistant |
| Aseptic pharmaceutical formulation tanks, cell culture tanks | PM1717 | -0.1~1.6 bar, complete hygienic certifications |
| Low-pressure WFI purified water loop | PM1707 | -50~1000 mbar high accuracy low pressure |
| High pressure for solid-containing slurry pump outlet | PM1714 | 0~16 bar high pressure version |
⚠️ General On-site Application Precautions
- Installation torque ≤35 Nm; over-torque will crack ceramic diaphragm.
- Avoid rapid temperature rise/fall during SIP sterilization to prevent thermal shock.
- Medium crystallization and protein adhesion will cause zero drift; match CIP cleaning formulation.
- Remote zero calibration via IO-Link without opening housing, great advantage for clean rooms.
- Flexible Aseptoflex Vario adapter: 동일한 센서 본체에 용접 베이스를 장착할 수 있음, Tri-Clamp 또는 Varivent 연결, 예비 부품 SKU 감소.
접촉기,회로 차단기,감지기,인코더,PLC,변환기


















NH42-63-318x560.png)



