ifm IS-3002-BPKG Rectangular Inductive Proximity Sensor

(Order designation; core part number: IS5001)

Derivatives of the same series:

IS5035: IS-3002-BPKG/AS (M8 connector version)

IS5068: IS-3002-BPKG/0,3M/AS-610 (0.3m short cable + M8 커넥터)

기본사양

유형: rectangular 유도형 근접 센서, flush mount

정격감지거리: 2 mm

산출: 3-와이어 DC, PNP 상시 개방 (아니요)

치수: 27.8 × 10.2 × 16 mm, ultra-thin rectangular housing for confined installation spaces

전기 데이터

공급 전압: DC 10～30 V

No-load current: ＜15 mA

맥스. 부하 전류: 200 엄마

스위칭 주파수: 800 헤르츠

전압 강하: ≤2.5 V

Protection features: reverse polarity, short-circuit and overload protection

Hysteresis: 1～15 % of Sr (rated sensing distance)

Correction factor: steel=1; stainless steel=0.7; brass=0.4; aluminium=0.3; copper=0.2

환경 & 기계적 데이터

보호등급: IP67

작동 온도: -25 ℃ ～ +80 ℃

하우징 재료: PBT

맥스. 조임 토크: ＜0.5 N·m (use flat washers)

상태 표시: yellow LED

연결 (standard IS5001): 2 m fixed PVC cable, 3×0.14mm²

BN (갈색): L+ positive supply

이것 (파란색): 0V ground

BK (검은색): PNP signal output

Key Application Keywords

Jig positioning, cylinder end-position detection, conveyor line counting, machine tool limit monitoring, metal detection in narrow spaces, material handling position feedback, signal acquisition for automated machinery

선택 & 교체 노트

Suffix definition: no suffix = 2m fixed cable; `/AS` = M8 3-pin straight connector; `/0,3M` = short lead
Domestic equivalent replacement: rectangular inductive proximity sensor with identical size, 2mm flush-shielded, PNP NO 출력
Installation note: flush mount; sensing face can be embedded into metal brackets without reduction of rated sensing distance.

문제 해결 가이드

출력 없음: first check 24V power supply and polarity; verify no reverse wiring

불안정한 신호: check voltage drop, gap between sensor and metal target, nearby strong magnetic interference and mounting clearance

LED does not light up: missing power supply or internal short circuit

NPN Version with Identical Mechanical Outline (IS Series, 27.8×10.2×16, flush 2mm, 3-와이어 DC)

주목: IS series is originally PNP dominant; NPN models carry suffix BOKG

IS5002: IS-3002-BOKG, NPN normally open, 2m PVC cable; fully interchangeable with IS5001 with identical mounting holes

IS5036: IS-3002-BOKG/AS, NPN 아니요, M8 3-pin straight connector (counterpart of IS5035)

IS5069: IS-3002-BOKG/0,3M/AS-610, 0.3m short cable + M8 커넥터 (counterpart of IS5068)

배선: BN=L+, BU=0V, BK=NPN output; supply 10~30V DC. All other parameters (스위칭 주파수, 온도 범위, IP67, 보호) match IS5001 completely.

III. Domestic Replacement List (추천, pin-to-pin compatible, 2mm flush-shielded)

Selection criteria: 27.8×10.2×16 outline, flush shielded, 2mm 감지 거리, DC10–30V, IP67, switching frequency ≥800Hz

Sodron SN08Y-02BPA (PNP 아니요) / SN08Y-02BNA (NPN 아니요)

On-site Installation Guidelines

조임 토크

PBT plastic housing; tightening torque must be below 0.5 N·m to prevent cracking; use thin flat washers to disperse clamping force.

Cable routing & 배선

Standard 2m PVC cable (3×0.14mm²);

Brown = +24V, Blue = 0V, Black = PNP signal;

Avoid routing alongside power cables and servo motor wires to prevent EMI interference. Use shielded cable or signal filters for long-distance wiring.

Built-in short-circuit & 역 극성 보호; avoid hot-plugging under power.

환경 적합성

IP67 등급; 절삭유에 대한 내성, cooling water and dust. Not suitable for continuous immersion or strong corrosive solvents (acetone, strong acid/alkali).

주변 온도 범위: -25～+80 ℃; add heat insulation if installed near heating blocks or injection mould slides.

Gap adjustment

Recommended working gap: 0.5～1.2 mm (leave safety margin). Do not operate continuously at the maximum 2mm gap; vibration will cause signal dropout.

Yellow LED lights up when metal is detected; use the LED for quick commissioning.

Switching frequency limit

정격주파수: 800 헤르츠 (최대 800 pulses per second). For field application, limit the frequency to ≤400 Hz. Not recommended for high-speed pulse counting or high-frequency vibration detection.

Important Limitation

This is a standard position sensor, NOT a safety-rated device. Do not connect it to safety circuits, safety gates or emergency stop protection loops.

Only detects ferrous/non-ferrous metals; no response to plastic, film or wood.

비교표: IS5001 Ultra-Thin Rectangular vs Standard Cylindrical Proximity Sensors

목	IS5001 IS-3002-BPKG Ultra-Thin Rectangular	Standard M8/M12 Cylindrical Inductive Sensor (예를 들어. ifm IE5001)
치수	27.8×10.2×16 mm, ultra-flat	Cylindrical M8/M12/M18; requires radial installation space
설치	Flush shielded; fits narrow slots, cylinder side faces and gripper gaps	플러시 / non-flush options; threaded body requires radial clearance
감지거리	결정된 2 mm	M8:1.5~2 mm; M12:4 mm; M18:8 mm; multiple range options
스위칭 주파수	800 헤르츠	M8 typically 2000 헤르츠; M12 approx 1000 헤르츠; wider high-frequency options
고정 방법	Side-mounted with screws	Threaded screw-in + lock nut; 더 빠른 설치
장점	Ultra-thin body, ideal for space-critical locations; flush mounting prevents collision damage	Wide model range, flexible sensing distances, universal spare parts, fast commissioning, broad price options
단점	Long body despite thin thickness; short 2mm sensing range; higher price than M8 types	Radial protrusion; prone to collision on slim cylinders and compact grippers
일반적인 응용 분야	Slim cylinders, finger grippers, narrow-slot jigs, small tool magazine positions	General limit detection, conveyor counting, machinery with ample mounting space
보호	IP67	Mostly IP67
산출	PNP 아니요 (NPN version IS5002 available with same outline)	PNP/NPN, 아니오/NC; full output options
Side Metal Immunity	Flush-shielded (can be embedded in metal brackets); keep ≥5mm clearance from side metal	Flush types can be embedded; non-flush types require large metal clearance