OMRON F3SG-4RE1630P30 안전 라이트 커튼

Application Scenarios of 오므론 F3SG-4RE1630P30 (1630mm Height, 30mm Hand Protection, Type4 PL e)

This light curtain features 1.63m protective height and 30mm detection resolution dedicated to hand protection, with highest safety Category 4 / 실 3. It has no muting function and only basic OSSD outputs, suitable for equipment requiring physical barrier to stop hands entering hazardous areas, covering machining, 오토메이션, 기호 논리학, 고무 & 플라스틱, robot industries:

1. Stamping & Forging Equipment (Core High-Risk Applications)
2. Safety protection for operating openings of air/hydraulic presses
3. Safety isolation at feed inlets of press brakes & plate shears
4. Material pick-up stations for hot & cold forging machines

특징: 1630mm height fully covers hand intrusion range of standing operators; configurable with manual reset + EDM monitoring to meet machine tool safety standards.

모델 코드 분석

모델: F3SG-4RE1630P30

2. 핵심 전기 & 안전 사양

2.1 Mandatory Safety Certifications

IEC 61496-1: 유형 4

ISO 13849-1: PL 전자 / 범주 4

IEC 61508: 실 3

EN 준수 60204-1, 범주 0 machine safety stop

2.2 Optical Detection Parameters

Protected Height: 1630 mm

Beam Pitch: 20 mm

Total Beams: 80 beams

Minimum Detectable Opaque Object: φ30 mm (hand protection grade)

감지 범위: 0.3 음 ~ 20 중

Maximum Response Time: 9 ms

Synchronization: Optical synchronization, no dedicated sync wiring required

2.3 전기적 매개변수

공급 전압: 24 VDC ±20% (SELV Safety Extra Low Voltage)

Safety Outputs: 2-channel PNP OSSD, max load per channel: 300 엄마

잔류전압: ≤2 V

누설 전류: ≤1 mA

Transmitter Current Draw: ≤120 mA; Receiver Current Draw: ≤150 mA

커넥터: M12 straight plug; 송신기: 5-핀, 수화기: 8-핀, factory fitted with 0.3m short cable

2.4 환경 & 기계적 성질

전반적인 차원: 35(여) × 35(시간) × 1630(엘) mm

유입 방지: IP67 (when connectors fully tightened)

작동 온도: -10 ℃ ~ +55 ℃

보관 온도: -25 ℃ ~ +70 ℃

습기: 35%~85% RH, 비응축

진동 저항: 10~55Hz, amplitude 0.7mm, 20 cycles per 3 축

충격 저항: 100 m/s², 1000 shocks per 3 축

하우징 재질: PBT 엔지니어링 플라스틱; Optical window: PC polycarbonate

순중량 (송신기 + Receiver Set): ~1.2 kg

3. 기능 설명 (Limitations of RE Basic Series)

✅ Standard Built-in Functions

1. Two independent OSSD safety outputs; outputs cut off immediately upon beam occlusion
2. DIP switch selectable: Auto-reset / Manual-reset, EDM external device monitoring enable/disable
3. 빨간색 & Green LED status indicators (힘, Sync, Occlusion, 잘못)
4. Long-distance mode optimized for detection range 10~20 m

❌ Unsupported Functions (Not available on RE basic model)

Muting function

다중 장치 캐스케이드 연결

Anti-interference beam coding

Auxiliary signal output (only dual safety outputs available)

4. M12 Connector Pin Definition

송신기 (5-핀 M12)

1: 24V DC+

2: 0V GND

3: Optical Sync

4: 미사용

5: 방패

수화기 (8-핀 M12)

1: 24V DC+

2: 0V GND

3: OSSD1 PNP Output

4: OSSD2 PNP Output

5: EDM Monitoring Input

6: Reset Input

7: Optical Sync

8: 방패

5. 일반적인 애플리케이션 시나리오
6. Perimeter safety protection for industrial robot workcells
7. Hand protection for stamping & injection molding machine operating zones
8. Safety isolation at inlet/outlet of automated conveyor lines
9. Human intrusion detection for large machine tools & assembly lines with 1.6m protective height
10. Safety light curtain for AGV traffic aisles in warehouses
11. 옵션 매칭 액세서리 (Ordered Separately)
12. F39-JD□RA: M12 extension cables (5m/10m/20m)
13. F39-BT Standard Mounting Bracket, F39-BTLP Long Bracket
14. F39-SG Splash Guard (for environments with cutting fluid & 심한 먼지)
15. F39-LZ Laser Alignment Tool (fast calibration for long-distance installation)
16. Alternative Replacement Models
17. Direct drop-in equivalent (동일한 사양): F3SG-4RE1630N30 (NPN 출력 버전)
18. Upgraded SR series (long-term supply recommended): F3SG-4SR1630-25 (유형 4, 향상된 기능, supports muting & cascade)
19. Lower safety Type 2: F3SG-2RE1630P30 (PL d, not applicable for high-risk pressing machinery)
20. 설치 & 시운전 지침
21. Minimum mounting distance between light curtain and hazard zone ≥0.3m; calculate safety distance matching machine braking time
22. Optical alignment after installation: steady green LED = normal operation; flashing LEDs indicate misalignment or out-of-range distance
23. EDM external monitoring must be enabled for high-risk equipment to detect safety relay contact welding faults
24. Reset mode configuration: Manual reset mandatory for presses/stamping machines; auto-reset allowed for conveyor lines
25. Avoid direct intense light irradiation on optical windows to prevent infrared interference and false triggering
26. Quick Troubleshooting Matrix

사출 성형 & Die Casting Equipment

2. Open pick-up ports replacing safety doors for vertical & horizontal injection molding machines
3. Feeding & part extraction windows for aluminum & zinc alloy die-casting machines
4. Operating station isolation for rubber vulcanizers & 압출기

애플리케이션: Manual loading/unloading of mold products, preventing hands entering clamping & extrusion hazard zones.

3. Machining Industry
4. Open loading/unloading channels for CNC milling machines & 머시닝 센터
5. Manual feed side protection for lathes, 그라인더 & band saws
6. Manual loading stations for sheet metal & fiber laser cutters

장점: IP67 dust & liquid resistance, tolerates cutting fluid and metal dust; 30mm resolution prevents finger intrusion into cutting tool hazard zones.

4. Industrial Robot Workcells
5. Access gates of 6-axis robot handling & assembly safety fences
6. Manual intervention channels for palletizing & welding robots
7. Safety passages for robot grinding & coating stations

설명: 1.63m height fits adult standing passage; power cut-off for robots upon personnel intrusion, complies with PL e machinery safety requirements.

5. Automated Conveying & 포장라인
6. 입구 & outlet protection for carton sealers & 포장 기계
7. Hazard zone isolation for stretch wrapping & pallet strapping machines
8. Separation stations of production lines & manual sorting workstations
9. Dual-side safety light curtains for AGV & forklift traffic aisles

Working Condition: Auto-reset configurable for assembly lines; machine stops upon accidental intrusion and resumes automatically after personnel leave.

6. 리튬 배터리 & 3C Electronic Automation Equipment
7. Manual operation windows for battery slitting & 와인딩 머신
8. Feed inlets of phone housing CNC & 프레스 장비
9. Open stations for battery testing & assembly machines

장점: 24V SELV low voltage eliminates electric leakage risk; low electromagnetic interference compatible with precision electronics production lines.

7. Warehouse & Logistics Lifting Equipment
8. Side safety protection for small freight elevators & lifts
9. Manual access openings of automated racking systems
10. Hazard gap isolation for roller conveyors & transfer machines
11. Wood & Stone Processing Machinery
12. Feed inlet protection for sliding table saws, sanders & stone cutting machines
13. Operating zone isolation for wood door & panel polishing equipment

부적합한 적용 시나리오 (Limitations of RE Series)

1. Processes requiring material passing through protective area (Muting function unavailable; machine stops when any workpiece passes, F3SG-SR series recommended instead)
2. Multi-curtain splicing via cascade connection (RE series does not support cascade)
3. Long-term vehicle & large workpiece access passages (Muting function mandatory to avoid frequent unexpected shutdowns)

Response Time Parameters of OMRON F3SG-4RE1630P30

1. Maximum Response Time: 9 ms
2. Supplementary Explanation:

This value refers to total full response duration for the complete set (transmitter + receiver) to cut off OSSD safety outputs

This model has 1630mm protective height with a large number of beams, representing the upper response time limit within the same RE series

The maximum value of 9ms must be adopted for safety distance calculation, typical values cannot be used

Total system stop reaction time after pairing with safety relay = 9ms (curtain) + safety relay actuation time

모델 선택 팁

If ultra-fast braking speed is required, select shorter protective height models from the same RE series; fewer beams deliver faster response speed.