접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지
모델 설명
| 모델 부분 | 설명 |
| R88M | Accurax G5 Series Standard Inertia AC 서보 모터 |
| 20030 | 200W Rated Power, 3000 rpm Rated Speed |
| 티 | Standard Shaft (with keyway) |
| BS2 | 20it Absolute Encoder, with Brake |
| 지 | Special Specification (usually for regional standards or custom options) |
- 핵심 기술 사양
| 목 | 값 | 메모 |
| 정격 출력 | 200여 | Continuous output power |
| 정격전압 | 3×200V AC | 3상 AC |
| 정격 속도 | 3000 rpm | 동기 속도 |
| 정격 토크 | 0.64 Nm | Continuous output torque |
| 피크 토크 | 1.91 Nm | Max torque for 3 초 |
| 인코더 유형 | 20‑bit Absolute | 고정밀 포지셔닝, 원점 복귀 필요 없음 |
| Encoder Resolution | 1,048,576 ppr | Ensures micron‑level positioning accuracy |
| 보호 등급 | IP67 | Fully sealed, dust‑proof and water‑immersion resistant |
| 절연 등급 | 클래스 B | 최대 허용 온도 130°C |
| 무게 | 대략. 2.5 kg | Including brake |
| 관성 모멘트 | 48.8×10⁻⁴kg·m² | 브레이크 부착 |
- 장착 치수
| 차원 | 값 | 단위 | 메모 |
| 플랜지 크기 | 60*60 | mm | Square mounting face |
| Flange Thickness | 11 | mm | – |
| 샤프트 직경 | 11h6 | mm | 키홈 있음 |
| Shaft Length | 27 | mm | – |
| Total Motor Length | 146 | mm | Including shaft and connector |
| Body Width | 60 | mm | – |
| Body Depth | 82.5 | mm | – |
| 장착 구멍 직경 | 50h7 | mm | 4 evenly distributed holes |
| Mounting Hole Specification | 4*4*8엘 | mm | Threaded holes |
- Wiring Information 📡
- Power Cable Connection
Three‑phase power: 유, 다섯, W 터미널 (corresponding to driver output)
Ground: PE terminal (must be reliably grounded)
절연저항: ≥100 MΩ (measured with 500V DC megohmmeter)
- Encoder Cable Connection
Dedicated CN2 encoder cable required
Signals: absolute position, home signal, alarm signal, 등.
Recommended cable length ≤10 m; signal amplifier required for longer cables
- Brake Cable Connection
Brake power supply: DC24V (±10%)
Brake resistance: 대략. 20 오
Brake operation: energized to release, de‑energized to brake (safety design)
- 포장 사양 (Carton, 수량, 무게, 크기)
| 목 | 값 | 단위 | |
| Quantity per Carton | 1 | unit/carton | |
| 순중량 | 대략. 2.5 | kg | |
| Package Dimensions | 152*254*102 | mm | Reference value |
| Gross Weight | 대략. 3.0 | kg | 포장 포함 |
- 애플리케이션 노트
- 설치환경
작동 온도: 0~40°C (비응축)
보관온도: -20~60°C
습기: 20~85%RH (비응축)
먼지를 피하십시오, 부식성 가스, 그리고 강한 진동
- Operation Limits
Load torque must not exceed rated torque during continuous operation
Peak torque only usable for 3 seconds to prevent overheating
Speed must not exceed 3000 rpm to avoid mechanical damage
- 유지
Regularly check encoder and power connections for looseness
Brake life: 대략. 5 백만 개의 작업; inspect braking performance periodically
Keep motor surface clean for good heat dissipation
- 안전
Motor must be reliably grounded to prevent electric leakage
적어도 기다려라 5 minutes after power‑off before wiring
Install overload protection to prevent motor burnout
- 호환 가능한 드라이브
추천: R88D‑KT series pulse input type driver
Or R88D‑KN series EtherCAT communication type driverDriver output must match 200W motor; recommended models: R88D‑KT02H or R88D‑KN02H
OMRON R88M‑K20030T‑BS2‑Z Servo Motor – Accessory Part Number Quick Reference
- Core Cable Accessories (필수의)
| 액세서리 유형 | 모델 형식 | Common Specifications | 애플리케이션 |
| Power Cable (with Brake) | R88A-AKB-BR | R88A-AKB003BR (3중) | For 200W motor with brake; integrated power + brake cable, motor-ide connector R88A-NK11A |
| R88A-AKB005BR (5중) | |||
| R88A-AKB010BR (10중) | |||
| Absolute Encoder Cable | R88A-RKC-N | R88A-RKC003N (3중) | For 20-it absolute encoder; driver CN2, motor CN2 |
| R88A-RKC005N (5중) | |||
| R88A-RKC010N (10중) | |||
| Absolute Encoder Battery Cable | R88A-RGD0R3C-S | Fixed 0.3m | Connects driver and absolute encoder battery for position retention |
| Separate Brake Cable | R88A-A1A-B | R88A-A1A003B (3중) | For separate brake connection when integrated cable is not used |
| R88A-A1A005B (5중) |
- Connector Accessories (for Custom Cables)
| 액세서리 유형 | 모델 | 위치 | 애플리케이션 |
| Motor-ide Power Connector | R88A-NK11A | Motor power port | For G5 series 200W and below |
| Driver-ide Power Connector | R88A-NU11C | Driver CN1 port | For analog / pulse type drivers |
| Motor-ide Encoder Connector | R88A-NK02R | Motor encoder port | For R88M-(050/100/200/400/750)30(H/T)@ series |
| Driver-ide Encoder Connector | R88A-NW01R | Driver CN2 port | All G5 series drivers |
| Brake Connector | R88A-NG01B | Motor brake port | For motors with brake |
- Battery & Parameter Accessories
| 액세서리 유형 | 모델 | 사양 | 애플리케이션 |
| Absolute Encoder Battery | R88A-C01 | DC3V Lithium Battery | Position retention after power loss; life approx. 5 연령 |
| Parameter Unit | R88A-R02G | Hand-eld Programmer | For driver parameter setting, 모니터링, 디버깅 |
| Parameter Backup Unit | R88A-E02 | Data Storage Module | Backup and restore driver parameters |
- 설치 & 보호 액세서리
| 액세서리 유형 | 모델 | 애플리케이션 |
| Motor Mounting Bracket | R88A‑MNT01 | Standard bracket for 60mm flange motor |
| Shaft End Cover | R88A‑CAP01 | Protect shaft end from dust |
| Cable Clamp | R88A‑CLIP02 | Fix servo cables, reduce vibration influence |
- Accessory Selection Notes ⚠️
- Power Cable Selection
Motors with brake must use models suffixed with “BR” (예를 들어, R88A‑CAKB005BR)
Recommended length ≤10 m; use amplifier for longer cables
- Encoder Cable Selection
Absolute encoders require R88A‑CRKC series (증분: R88A‑CRKB series)
Recommended length ≤15 m; special customization for long distances
- Battery Replacement
Replace battery with driver powered ON to avoid position data loss
Recommended replacement cycle: 4–5 years
- 호환성
All accessories fit Accurax G5 series 200W servo motor (R88M‑K20030T‑BS2‑Z)
Fully compatible with R88D‑KT02H / R88D‑KN02H drivers
