The Schneider 140CPS11420 is an AC input power supply module dedicated to the Modicon Quantum automation platform. 공식 전체 모델 지정은 140-CPS-114-20입니다.. 지원합니다 115/230 VAC 넓은 전압 입력 및 5.1 VDC 출력, 독립 실행형 모드에서 작업 (11에이) 및 병렬 중복 모드 (총 20A). 다중 보호 회로 내장, Quantum 시리즈 PLC 백플레인에 적합하며 산업 자동화 제어 시스템에 안정적이고 신뢰할 수 있는 전원을 제공합니다..
- 모델 세그먼트 정의 (Standard Nomenclature)
| 분절 | Standard Code | 의미 | 자세한 설명 |
| 140 | 140 | Modicon Quantum Series | Schneider mid-to-high-end PLC automation platform, supporting hot swap and redundant design |
| CPS | CPS | Control Power Supply | Dedicated power supply module for Quantum series, providing core system power |
| 114 | 114 | I/O Specification Code | 11 = 115/230 VAC wide input; 4 = 5.1 VDC 출력, supports parallel redundancy |
| 20 | 20 | 버전 / 구성 코드 | 표준 버전, standalone/parallel operation available with fault alarm output |
| 140CPS11420 | 140CPS11420 | Global Unique Part Number | Official Schneider product ID for procurement and after-sales tracking |
| 슈나이더 일렉트릭 | 슈나이더 일렉트릭 | 상표 | French Schneider Electric, global leader in energy management and automation |
- 핵심 사양 매개변수 (Official Schneider Manual Data)
| 범주 | 매개변수 | 값 | 비고 |
| Basic Characteristics | 제품 유형 | Modicon Quantum Power Supply Module | Compatible with Quantum PLC rack, 10-슬롯 / 16-slot chassis |
| 장착 유형 | Rack-mounted | Standard Quantum module dimension, weight 650g, hot-swappable | |
| 작동 온도 | 0℃ ~ +60℃ | Adapt to industrial temperature fluctuation; 저장: -40℃~ +85℃ | |
| 상대습도 | 5%~95% 상대습도, 비응축 | Industrial moisture-proof design | |
| 인증 | UL, cUL, CSA, CE | Compliant with global industrial safety standards | |
| Input Characteristics | 입력 전압 | 115/230 VAC switchable | 50/60Hz automatic frequency adaptation |
| 입력 전류 | 3.5A @ 115V, 1.8A @ 230V | Max input current including inrush current | |
| 역률 | 0.98 | High-efficiency power design, 에너지 절약 | |
| Output Characteristics | 출력 전압 | 5.1 VDC | High precision regulation, 리플 < 50mV |
| Standalone Current | 11에이 | Single module operation, rated power 56.1W | |
| Parallel Total Current | 20에이 | Multi-module parallel redundancy, max total power 102W | |
| 능률 | >85% | High conversion efficiency, low heat generation | |
| 보호 기능 | Overvoltage Protection | 5.8V~6.2V DC | Auto shutdown when output overvoltage occurs |
| 과부하 보호 | 120% 정격 전류 | Shutdown after 10s continuous overload to protect loads | |
| 단락 보호 | Built-in electronic protection | Fast shutdown under short circuit; auto recovery after fault cleared | |
| Over Temperature Protection | 85℃ | Module auto shutdown at overtemperature | |
| 경보 & 표시 | Status Indicator | Green PWR OK LED | Lights steadily when power operates normally |
| Fault Output | 1-channel NC relay contact | 6A @ 220V AC for power fault alarm | |
| Electrical Isolation | 입력 / Output Isolation | 1500 VAC | EN 준수 61131-2, 강력한 간섭 방지 |
- 액세서리 목록 (공식적으로 추천됨)
| 액세서리 이름 | 부품 번호 | 기능 설명 | Recommended Qty |
| 140XTS00200 | 140XTS00200 | Quantum module mounting rail | 1 per rack, 표준 DIN 레일과 호환 가능 |
| 140CPS11420-COVER | Factory Standard | Module dust cover | 1 per module, protects interface when uninstalled |
| 140CPS-TERM-BLOCK | Factory Standard | Power terminal block | 1 set per module, screw wiring for site installation |
| 140CPS-ALARM-CABLE | 관습 | Fault alarm signal cable | 1 per module, connects NC contact to alarm system |
| 140CPS-PARALLEL-KIT | 140CPS02000 | Parallel redundancy connection kit | 1 set per additional parallel module |
| 140CPS-INPUT-CORD | 관습 | Power input cable | 1 per module, select specification according to site voltage |
- 경쟁자 & 브랜드 간 교체 (Direct Compatibility)
| 상표 | 모델 | 주요 매개변수 | 호환성 / 차이점 | 교체 권장사항 |
| Schneider Same Series | 140CPS11400 | 5.1VDC, 11에이, non-parallel | No parallel function, other specs identical | Simple systems without redundancy |
| Schneider Same Series | 140CPS12420 | 24VDC, 5에이, parallelable | Different output voltage for 24V loads | I/O system requiring 24V power supply |
| Schneider Same Series | 140CPS21420 | 115/230VAC, 5.1VDC, 20에이 | 20A single module, no parallel needed | High-power systems, 랙 공간 절약 |
| 지멘스 | 추신 407 10에이 | 120/230VAC, 5VDC, 10에이 | Fits S7-400 series, 유사한 기능 | Preferred for Siemens PLC system integration |
| 록웰 | 1756-PA72 | 120/230VAC, 5VDC, 12에이 | Fits ControlLogix with redundant design | Priority for Rockwell automation systems |
| 씨줄 | DSQC 602 | 115/230VAC, 5VDC, 10에이 | Dedicated for robot control system, 높은 신뢰성 | Robot application scenarios |
| 국내 대안 | Inovance IS620PS5R1 | 115/230VAC, 5.1VDC, 11에이 | 30%-50% 저렴한 가격, fully compatible functions | 비용에 민감한 프로젝트 & localization requirements |
- 선택 지침 & 대체 솔루션
Selection Mnemonic
> Quantum platform 5.1V, 11A standalone 20A parallel;
> 115/230 넓은 입력, NC contact for fault alarm.
Key Selection Considerations (5 치수)
- Power Demand Matching
Standard load (≤11A): Choose 140CPS11420 standalone mode
Redundancy required (≤20A): Two 140CPS11420 in parallel for higher system reliability
High load (>20에이): Select 140CPS21420 (20A single module) or multiple modules in parallel
- Power Supply Environment Adaptation
115V/230V AC grid: 140CPS11420 (넓은 입력, no manual switching needed)
DC power supply scenario: Choose 140CPS31420 (24VDC 입력)
Extreme temperature: Select wide-temperature version for -25°C~+70°C
- Redundancy Strategy Design
Non-redundant: Single 140CPS11420 standalone
Basic redundancy: Two 140CPS11420 parallel (총 20A)
Full redundancy: Three 140CPS11420 (2 active + 1 대기) for maximum availability
- Alarm Function Requirement
Standard alarm: Built-in NC relay contact (6A@220V AC) on 140CPS11420
원격 모니터링: Add 140NOE77100 Ethernet module for network-based power status monitoring
- Installation Space Evaluation
10-slot rack: 맥스 2 power modules installed (1 recommended for redundancy reserve)
16-slot rack: 맥스 3 power modules (2 active + 1 대기)
Space limited: Choose 140CPS21420 (20A single module)
Recommended Alternative Solutions (3 Scenarios)
| 응용 시나리오 | 권장 솔루션 | 장점 |
| 비용 최적화 | 국내 대체 (Inovance IS620PS5R1, XINJE XCPS511) | 30%-50% 비용 절감, function compatible, meets localization demands |
| Protocol Upgrade | 140CPS11420 + 140NOE77100 Ethernet Module | Enable remote power status monitoring, support Modbus TCP |
| 기능 확장 | 140CPS11420 + 140XTS00200 Extension Rail | Support multi-module parallel to meet higher power demand |
- Air Freight Compliance & CE 인증 (International Trade)
- Air Freight Compliance
No built-in lithium battery / supercapacitor: Classified as ordinary industrial electronic equipment, no special air freight restrictions
Transport Category: 수업 9 miscellaneous dangerous goods (non-dangerous in actual shipment)
HS Code: 85044099 (Other PLC dedicated power supply modules)
Packaging Standard: Comply with ISTA 3A to avoid transit damage
- CE Certification Information
Compliant Directives: 2014/30/EU (EMC), 2011/65/EU (RoHS 규제), 2014/35/EU (LVD)
Test Standards: 안에 61131-2 (PLC power standard), 안에 55011 (Industrial EMC)
Certification Number: Available on Schneider official website by entering part number 140CPS11420
- Application Cases & 산업 적응
일반적인 적용 사례
- 자동차 제조: Power supply for Quantum PLC control system; 140CPS11420 parallel redundancy ensures 24/7 operation of welding robot production lines; fault alarm contacts connect to MES system for remote monitoring.
- 석유화학산업: Core power for process control systems; wide voltage input adapts to regional grid difference; overvoltage/overtemperature protection suits harsh environments; parallel mode guarantees uninterrupted control of critical valves.
- 수처리: Pump station automation system; 140CPS11420 supplies power to PLC and sensors; NC alarm contact connects to emergency shutdown system to avoid overflow accidents caused by power failure.
- 음식 & 음료: Filling production lines; high-reliability design adapts to wash-down environments; parallel redundancy ensures continuous production and improves equipment OEE.
Industry Adaptation Guide
| 산업 | Adaptation Advantages | 권장 구성 |
| 자동차 제조 | 중복된 디자인, 결함 경보, 높은 신뢰성 | 2 × 140CPS11420 parallel + 140NOE77100 Ethernet Module |
| 석유화학 | 넓은 온도, multi-protection, 높은 간섭 방지 | 140CPS11420 + 서지 보호기 + 절연 변압기 |
| 수처리 | Moisture-proof, 원격 모니터링, emergency shutdown | 140CPS11420 + Alarm Module + Redundant Power Switch |
| 음식 & 음료 | High stability, 쉬운 유지 보수, hot swap | 140CPS11420 + Dust Cover + Quick Wiring Terminal |
The Schneider 140CPS11420 is a core power supply module for the Modicon Quantum platform. Featuring 115/230V wide voltage input, 11A standalone / 20A parallel output, multi-protection circuits and fault alarm capability, it delivers a highly reliable power solution for industrial automation systems. Its parallel redundancy and hot-swap features make it ideal for critical production processes and unattended sites, effectively improving system availability and safety. Combined with Schneider Quantum PLC series, it forms a complete industrial control solution widely applied in automotive, 석유화학, 수처리, 음식 & beverage and other industries.
- Complete Modicon Quantum Power Supply Model List
| 모델 | 입력 전압 | 출력 전압 | Standalone Current | Parallel Total Current | 특별한 기능 | 응용 시나리오 |
| 140CPS11400 | 115/230 VAC | 5.1 VDC | 11에이 | — | Non-parallelable | Simple systems without redundancy |
| 140CPS11420 | 115/230 VAC | 5.1 VDC | 11에이 | 20에이 | Parallelable, NC alarm | Standard systems requiring redundancy |
| 140CPS12400 | 115/230 VAC | 24 VDC | 5에이 | — | Non-parallelable | 24V load simple systems |
| 140CPS12420 | 115/230 VAC | 24 VDC | 5에이 | 10에이 | Parallelable, NC alarm | 24V load with redundancy |
| 140CPS21420 | 115/230 VAC | 5.1 VDC | 20에이 | — | High power single module | High-power systems, 공간 절약 |
| 140CPS31420 | 24 VDC | 5.1 VDC | 11에이 | 20에이 | DC input, parallelable | DC power supply scenarios |
| 140CPS41420 | 115/230 VAC | 5.1 VDC | 11에이 | 20에이 | 넓은 온도 (-25°C~+70°C) | Extreme temperature environments |
접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지



















NH42-63-318x560.png)




