접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지
Schneider ACTI-9 IPRF1-12.5R-3P+N-A9L16634 서지 보호 장치 (SPD)
- 모델 코드 정의
전체 모델 분석: ACTI-9-IPRF1-12.5R-3P+N-A9L16634
| 코드 세그먼트 | 정의 | 자세한 설명 |
| ACTI-9 | 제품 시리즈 | Code for Schneider Electric ACTI-9 modular low-voltage distribution series |
| IPRF1 | 제품 유형 | Plug-in Type T1+T2 combined SPD with voltage-limiting structure |
| 12.5아르 자형 | 핵심 매개변수 | 12.5: Maximum impulse current Imax=12.5kA; 아르 자형: Equipped with remote indication contact |
| 3P+N | 극 구성 | 3-단계 + neutral pole protection, applicable to 230/400V three-phase four-wire power system |
| A9L16634 | 주문 코드 | Unique official Schneider part number for procurement and inventory management |
Full Product Description: Acti9 iPRF1 12.5r 3P+N 350V Plug-in T1+T2 Surge Protector with Remote Indication
iPRF1: Pluggable design for easy maintenance & replacement without power cut-off
T1+T2: Comply with both Class I (10/350μs) 클래스 II (8/20μs) surge protection criteria
350다섯: Maximum continuous operating voltage Uc, matched for standard 230/400V AC power grid
Remote indication: Fault dry contact output for BMS/monitoring system integration
- 핵심 기술 사양
기본 전기 매개변수
| 목 | 값 | 단위 | 비고 |
| 제품 유형 | T1+T2 combined SPD | – | Voltage-limiting design against direct & induced lightning surge |
| 폴 | 3P+N | – | Full protection for three-phase four-wire including neutral line |
| Max Continuous Operating Voltage (UC) | 350 | 뷔와 | Suitable for 50/60Hz 230/400V low voltage grid |
| Rated System Voltage (그리고) | 230/400 | 뷔와 | Standard LV distribution nominal voltage |
| Max Impulse Current Imax (10/350μs) | 12.5 | 그만큼 | Class I rating for direct lightning diversion |
| 공칭 방전 전류 입력 (8/20μs) | 50 | 그만큼 | Class II rating for induced overvoltage suppression |
| 전압 보호 수준 (위로) | ≤1.5 | kV | Clamp surge voltage to safeguard equipment insulation |
| 응답 시간 | ≤25 | ns | Fast response to discharge transient surge energy |
| Short-circuit withstand capacity | 10 | 그만큼 | Coordinate with upstream backup protection device |
기계 & 환경 매개변수
| 목 | 값 | 단위 | 비고 |
| 설치 | DIN 레일 장착 | – | Standard 35mm DIN rail complying with EN 50022 |
| Overall Width | 72 | mm | Occupies 4 modular pitches (18mm per module) |
| 하우징 재질 | Thermoplastic | – | UL94 V0 flame retardant per IEC 60695-11-10 |
| 유입 방지 | IP20 | – | Finger-touch safe, 실내 캐비닛 설치 전용 |
| 작동 온도 | -40 ~ +80 | ℃ | Wide ambient temperature for harsh working condition |
| 원격 신호 | Dry contact (아니오/NC) | – | Contact status change upon SPD failure for remote monitoring |
| Termination | 나사 터미널 | – | Accept 1.5~35mm² copper conductor for reliable wiring |
III. Full IPRF1 Series Model List
| 모델 | 폴 | Max Impulse Current | 원격 표시 | 주문 코드 | 적용 가능한 시스템 |
| iPRF1 12.5r 1P+N | 1P+N | 12.5그만큼 | 예 | A9L16632 | Single-phase 230V system |
| iPRF1 12.5r 3P | 3피 | 12.5그만큼 | 예 | A9L16633 | Three-phase three-wire system |
| iPRF1 12.5r 3P+N | 3P+N | 12.5그만큼 | 예 | A9L16634 | Three-phase four-wire 230/400V system |
| iPRF1 12.5 1P+N | 1P+N | 12.5그만큼 | 아니요 | A9L612501 | Single-phase without remote monitoring |
| iPRF1 12.5 3P+N | 3P+N | 12.5그만큼 | 아니요 | A9L612601 | Three-phase four-wire without remote monitoring |
- Cross & Legacy Replacement Options
- 동일한 시리즈 대안
| 원래 모델 | 교체 모델 | 차이점 설명 | Application Adjustment |
| iPRF1 12.5r 3P+N(A9L16634) | iPRF1 12.5 3P+N(A9L612601) | Remote indication removed | Small distribution without remote monitoring |
| iPRF1 12.5r 3P+N(A9L16634) | iPRD1 12.5r 3P+N(A9L16482) | Upgraded to iPRD1 series with enhanced reliability | Commercial buildings requiring superior surge protection |
| iPRF1 12.5r 3P+N(A9L16634) | iPRF1 Master 35r 3P+N | Imax upgraded to 35kA | Lightning-prone zones & critical industrial facilities |
- 브랜드 간 등가물
| Schneider Part | ABB 상당 | 지멘스 등가물 | Phoenix Contact Equivalent |
| iPRF1 12.5r 3P+N(A9L16634) | OVR T1+2 3N-40-350 | 5SD7440-8 | VAL-MS 350/3+1-FM |
| 보호 등급 | T1+T2 | T1+T2 | T1+T2 |
| Max Impulse Current | 12.5그만큼 | 12.5그만큼 | 12.5그만큼 |
| 위로 | 1.5kV 이하 | 1.5kV 이하 | 1.5kV 이하 |
| Remote Contact | 예 | 예 | 예 |
- Recommended Upgrade Models
| 구형 모델 | 업그레이드 모델 | 업그레이드 장점 | 적용범위 |
| iPRF1 12.5r 3P+N(A9L16634) | iPRD1 25r 3P+N(A9L16483) | Imax raised to 25kA for Class I/II building protection | Large commercial complex & manufacturing plant |
| iPRF1 12.5r 3P+N(A9L16634) | iPRF1 Master 35r 3P+N | Imax=35kA with superior surge withstand | Lightning intensive area, 데이터 센터, 병원 & key infrastructures |
- 응용 환경 & Project Cases
Recommended Applications ✅
상업용 건물: Grade III/IV construction such as office towers, 쇼핑몰, hotels against indirect lightning & switching overvoltage
산업플랜트: Medium/small factory production line control cabinet, protection for PLC, inverter and precision automation equipment
공공시설: 학교, 병원, libraries to secure stable power supply for public equipment
작은 & Medium Data Room: Protect server & network devices from mains transient surge
Residential Premises: High-rise & villa community to safeguard home appliances & smart home control system
Non-Recommended Applications ❌
Grade I/II key construction (공항, railway hub, large-scale IDC): Requires iPRD1 series with ≥25kA Imax
Open-air exposed installation: IP20 not suitable for outdoor use without extra waterproof enclosure
Grid voltage exceeding 350V AC: Over Uc rating leads to premature SPD breakdown
Installation without qualified earthing: Required earth resistance ≤10Ω for effective surge dissipation
Practical Application Cases
- Grade A Office Building: iPRF1 12.5r 3P+N(A9L16634) fitted in floor distribution panels for main power protection. Post-installation before thunderstorm season, IT equipment failure rate dropped by 85%, eliminating office shutdown & data loss caused by lightning strike. Remote contact links with building automation system for instant fault alert and 60% maintenance efficiency improvement.
- Auto Component Factory: SPD installed for robot & PLC control power supply. Original frequent unexpected production shutdown from grid fluctuation incurred monthly loss around CNY50,000; after SPD commissioning, downtime reduced by 90% with annual cost saving approx. CNY500,000. ≤25ns quick response prevents servo drive damage from voltage spike and improves machining precision.
- High-End Smart Residential Compound: SPD equipped at main distribution room and household panel to protect smart lighting, security & home control devices. Remote signal connects property monitoring platform for 24/7 real-time status check, timely faulty module replacement, improving community power safety & resident satisfaction.
- 일반적인 결함 & 문제 해결
| 결함 증상 | 근본 원인 | Remedial Action | 예방 조치 |
| Remote alarm triggered | SPD module burnout or internal thermal disconnection | 1. Replace plug-in module after power off | Annual pre-thunderstorm routine inspection; replace SPD after 5 effective surge operations |
| 2. Inspect upstream breaker tripping status | |||
| 3. Test earth continuity | |||
| Module fails to clip onto DIN rail | Improper DIN rail or broken module latch | 1. Verify DIN rail compliance | Handle module gently during installation, avoid brute force |
| 2. Confirm correct insertion direction | |||
| 3. Replace damaged SPD unit | |||
| 단자 과열 | Undersized wire or loose screw | 1. Replace cable within 1.5~35mm² range | Periodic thermal check on high-current wiring terminals |
| 2. Retighten screw with 2.5Nm torque | |||
| Plug-in module stuck | Lock unreleased or over-clamped | 1. Press top release latch | Do not over-press module during mounting |
| 2. Wiggle slightly for extraction | |||
| Upstream MCCB trips | Excessive surge current or short-circuited SPD | 1. Check SPD integrity | Select matched backup fuse/circuit breaker; regular earthing resistance test |
| 2. Verify matching rating of upstream protection | |||
| 3. Confirm earth resistance ≤10Ω |
Ⅶ. 선택 지침 & 빠른 참조 규칙
Quick Selection Mnemonic
12.5kA T1+T2 grade, 3P+N for three-phase grid,
350V rated with remote monitoring ready,
Plug-in structure easy to service, IP20 for indoor cabinet,
Ideal for commercial & factory, Grade III/IV lightning safeguard.
빠른 규칙
- IPRF1 coding: suffix 12.5r =12.5kA + remote contact; plain 12.5 = no remote indication
- 극 선택: 1P+N for single phase, 3P for 3P3W, 3P+N for standard 3P4W 400V grid
- Order code mapping: A9L16632(1P+N) / A9L16633(3피) / A9L16634(3P+N)
- Grade matching: iPRF1 12.5r for III/IV buildings; iPRD1 25r for I/II critical constructions
- 설치 요구 사항: Must be paired with upstream backup protection, earthing resistance ≤10Ω
