Schneider XPSAV11113-24VDC 안전 모니터링 릴레이

1. Model Segment Definition

XPSAV11113-24VDC

XPSAV: Schneider Safety Monitoring Relay 시리즈, dedicated to dual-channel safety circuits for emergency stop, safety door and safety light curtain.

11113: Internal contact logic and channel configuration code.

24VDC: Rated power supply 24V DC.

2. Core Basic Parameters

3. 주요 특징
4. Dual-channel redundant input with safety forced-guided contacts;
5. Millisecond-level safety cut-off response;
6. Only supports 24V DC power supply; AC voltage input is prohibited;
7. Built-in self-diagnosis and circuit monitoring functions.
8. Compatible Replacement Models
9. Same-brand direct replacement: Direct replacement with the same model; no upgraded alternative version
10. 국내의 / Cross-brand compatible models:

Omron G9SA-301 24VDC

Weidmüller Dual-channel Safety Relay 24VDC

Siemens 3RK3 series 24V safety module with equivalent specifications

5. 애플리케이션 노트

Safety signals must be connected synchronously through dual channels; single-channel connection cannot work normally;

Strictly prohibit mixed use with AC24V power supply, which will directly burn out the module;

Output contacts are only used for safety circuit control and cannot directly drive heavy loads.

Schneider Safety Monitoring Relay Series List & 브랜드 간 비교

1. Overview of Core Schneider Safety Monitoring Relay Series

Schneider 안전 모니터링 릴레이는 Preventa XPS 시리즈를 중심으로 합니다., 비상정지 등 풀시나리오 안전기능을 망라, 안전문, 안전 라이트 커튼 및 양손 제어. 기본형(Basic Type)과 범용형(Universal Type)으로 구분됩니다., 모두 EN/ISO 준수 13849-1 그리고 IEC 61508 안전기준.

2. Model Segment Coding Rules

Taking XPSAV11113-24VDC as an example, Schneider safety relay model coding follows unified logic:

3. Complete Model List of Each Series

3.1 XPSAV Series (비상 정지 + Solid-State Output)

3.2 XPSAF/XPSAFL Series (Standard Emergency Stop / Light Curtain Monitoring)

3.3 XPSAC Series (Basic Emergency Stop Monitoring)

3.4 XPSAR Series (Multi-contact Emergency Stop / Light Curtain Monitoring)

3.5 Universal XPSU Series (Replacement for Traditional Series)

4. Cross-Brand Comparison Table (Mainstream Models)

5. 선택 지침 & 교체시 주의사항
6. Safety Level Matching: The PL / Cat. level and SIL level of the replacement model shall not be lower than the original one.
7. Input Type Compatibility: Distinguish High/Low Level Input and PNP/NPN types; XPSAF supports dual types, while XPSAFL only supports high level.
8. Consistent Reset Mode: Divided into Automatic Reset, Monitored Reset and Manual Reset, which shall match the application scenario.
9. 터미널 유형: Suffix P stands for plug-in terminal; no suffix for screw terminal. Pay attention to mounting compatibility during replacement.
10. 공급 전압: Strictly distinguish DC24V, AC230V and Universal AC/DC to avoid module burnout.
11. Series Replacement Roadmap

Schneider is gradually replacing traditional series with the XPSU Universal Series:

XPSAR → Combined XPSUAF + XPSUEP or XPSUAT series

XPSATE/XPSATR → XPSUAT series

XPSAF/XPSAV → XPSUAF series