Siemens 6ES7512-1DK01-0AB0 CPU

지멘스 6ES7512-1DK01-0AB0 CPU 1512SP-1 PN (ET200SP Distributed CPU)

상품상태: Discontinued PM410, spare parts supply available; upgrade replacement model: 6ES7512-1DM03-0AB0

1. Model Code Bit-by-Bit Breakdown

Full designation: SIMATIC DP CPU 1512SP-1 PN, S7-1500-architecture CPU for ET200SP distributed station

1. 핵심 하드웨어 & 전기 사양

III. Environmental Tolerance Specifications (Condensation not permitted)

1. 소프트웨어 호환성

Maximum firmware: V2.9 (FS05)

TIA 포털:

FW V2.9: V17 or higher for full feature support

From FW V1.8: minimum TIA V13 SP1 Update4; older versions can configure in low-firmware mode with some new features unavailable

Supported functions: OPC UA 서버, PROFINET RT/IRT, isochronous OB6x min. cycle 625 µs; Multi-Hot-Swap for hot-swap modules

1. 배선 정의 (Power Terminal X80)

⚠️Important: Port1/Port2 RJ45 ports are not built-into the CPU body, BusAdapter bus adapter must be inserted; Port3 is fixed on-board RJ45 for direct wiring.

Available BusAdapter types: RJ45, M12, FC fast-connect, LC fiber-optic adapter, 등.

1. 포장 목록 & 옵션 부품

✅ Standard delivery scope

1. CPU 1512SP-1 PN main module
2. Pre-assembled X80 power connector
3. Paper manuals, certificate of conformity

❗ Not included, 별도로 주문해야 합니다

1. SIMATIC memory card (필수적인, CPU cannot start without it)
2. BusAdapter bus adapter (for Port1/Port2)
3. ET200SP base unit BU-type A0; right-side expansion I/O modules
4. CM-DP PROFIBUS communication module (if DP interface is required)

Ⅶ. Cross-Model Replacement Comparison

Upgrade note: Existing projects can directly replace the order number in TIA Portal without program-logic modification; match firmware version with memory card.

Extended-temperature coated variant: 6AG2512-1DK01-1AB0 (시플러스, -40~+60 ℃ with conformal coating), derived from this base model for harsh environments.

Ⅷ. 일반적인 애플리케이션 시나리오

1. Distributed field stations: 컨베이어 라인, 포장 기계, control cabinet remote from field; ET200SP operates independently as local CPU
2. Medium-small machinery: 직물, plastics machinery, 물류 분류; PROFINET IRT isochronous motion control
3. Hybrid architecture: acts both as local CPU and intelligent slave communicating with upper-level S7-1500 master
4. 개조 프로젝트: legacy-equipment upgrade, compact cabinet footprint, hot-swap I/O for maintenance
5. Model-Selection Pitfall Guide (하드 제약)
6. ❌ Power-on without SIMATIC memory card: CPU fails to start, no program execution
7. ❌ Omit BusAdapter: Port1/Port2 cannot bring out network cables; Port3 on-board RJ45 can be used independently
8. ❌ Vertical mounting max. temperature limited to +50 ℃; do not apply horizontal +60 ℃ specification, otherwise over-temperature alarm occurs
9. ❌ No native EtherCAT support; PROFINET only; Modbus-RTU requires additional CM communication module
10. ❌ Altitude＞2000 m: derate supply voltage and ambient temperature strictly per manual derating curve
11. ✅ Advantage: ET200SP base unit hot-swap; replace I/O modules without station power-down; supports simultaneous multi-device hot-swa
12. 일반적인 오류 문제 해결