지멘스 VVF53.25 플랜지 글로브 밸브

Siemens ACVATIX™ long-stroke 2-way flanged globe valve, DN25 공칭 직경, PN25 압력 등급. 매체 온도 범위 -20~220°C에 적합. SAX/SKD/SKB/SKC 시리즈 액추에이터와 일치. 스팀 등 유체제어에 적용, 뜨거운 물과 열매유. 대표적인 모델: VVF53.25-10 (Kvs=10m³/h). 주문 번호는 S55208로 시작합니다..

1. 모델 세그먼트 정의

2. Full Version Core Specification Table

3. 전체 시리즈 모델 목록 (VVF53 2-Way Flanged Globe Valve)

4. 경쟁자 / Obsolete Model Replacement List

4.1 Same Brand Alternative Models (Directly Compatible)

4.2 브랜드 간 동등한 모델

5. 응용 환경 & 산업 사례

Recommended Application Scenarios (★★★★★)

HVAC System: Temperature control for central air conditioning water systems in commercial buildings, hotels and hospitals

Industrial Steam System: Steam heating and humidification control in textile, food and pharmaceutical industries

District Heating: Secondary side temperature regulation for urban heating pipe networks

Refrigeration System: Flow control for chillers and cooling towers

Industrial Fluid Control: Regulation of process fluids (hot water, thermal oil, condensate) in chemical and power industries

재생에너지: Heat exchange control for solar energy and ground source heat pump systems

일반적인 적용 사례

1. Steam Sterilization System in Food Processing Plant

Application Target: Precisely control steam flow to keep sterilization temperature stable at 121°C

Core Advantage: Equal percentage flow characteristic adapts to wide range flow regulation; PN25 rating withstands steam pressure fluctuation

시스템 구성: VVF53.25-10 + SKD62 electro-hydraulic actuator + S7-1200 PLC control

Operation Effect: Temperature control accuracy ±0.5°C, sterilization efficiency +20%, energy consumption -15%

2. Central Air Conditioning System of Commercial Complex

Application Target: Regulate chilled water flow to realize independent temperature control in different zones

Core Advantage: Compatible with SAX61.03 electric actuator with fast response; flanged design for easy installation and maintenance

시스템 구성: VVF53.25-8 + SAX61.03 actuator + room thermostat + building management system

Operation Effect: Room temperature accuracy ±1°C, improved comfort, system energy consumption -18%

Not Recommended Scenarios (★☆☆☆☆)

High differential pressure＞16bar: Adopt VVF53K high differential pressure version

Strongly corrosive media such as strong acid and alkali: Select special alloy valves

Temperature over 220°C or below -20°C: Beyond nominal range, sealing performance declines

Media containing solid particles: Easy seat wear and increased leakage

Vacuum system: Not applicable; dedicated vacuum valve required

6. 설치 & 배선 지침 (Engineering Essential)

Installation Regulations

1. Mounting Direction: Vertical installation with actuator upward; horizontal installation must keep actuator shaft horizontal
2. 흐름 방향: Install strictly according to valve body arrow; reverse installation not allowed
3. Pipeline Preparation: Flush pipelines thoroughly before installation; 100μm filter is recommended
4. Flange Connection: Use ISO 7005 standard flanges; fasten bolts evenly to avoid valve body deformation
5. 격리: Insulate valve body for high temperature media to reduce heat loss and prevent scalding
6. Maintenance Space: Reserve ≥200mm clearance around valve for actuator disassembly and servicing

Actuator Wiring Diagram (SAX61.03 Example)

1 2 3 4 5 6 7 8

┌─────────────────────┐

│ │

│ SAX61.03 Actuator │

│ │

└─────────────────────┘

시운전 핵심 사항

1. Stroke Calibration: Perform automatic stroke calibration after power-on to ensure full open / full closed position accuracy
2. Flow Test: Verify linear relationship between control signal and flow via PLC output
3. Leakage Inspection: Check closed valve leakage complies with Class IV standard
4. 응답 시간: Test full travel response time to meet system control requirements
5. Alarm Configuration: Set actuator fault alarms (over torque, power failure) for system monitoring
6. 선택 니모닉 & Quick Rules

선택 니모닉

Siemens 2-way VVF53,

DN25 size PN25 rated,

Long-stroke high precision guaranteed,

Equal percentage flow graded,

Fit steam and hot water shaded,

-20 to 220°C ranged,

Kvs 6.3/8/10 selected,

SAX/SKD actuators matched,

K version for high pressure dated,

JC for corrosion related,

Order by S55208 validated,

Flanged mounting firmly stated.

빠른 선택 규칙

1. Diameter Matching: Choose DN15~DN250 by pipe size; DN25 corresponds to VVF53.25
2. Kvs Calculation: Calculate required Kvs via formula \(Kvs=Q\times\sqrt{\Delta P/\rho}\) according to system flow and differential pressure
3. Pressure Rating: Standard for regular conditions, -K version for high differential pressure
4. Media Temperature: Standard range -20~220°C; customized for over-limit temperature
5. Actuator Selection: SAX electric for small torque; SKD/SKB/SKC electro-hydraulic for large torque
6. 특별 조건: Select -JC stainless steel internal parts for corrosive media
7. 항공 화물 규정 준수 & Certification Info (International Trade)

항공 화물 규정 준수: 리튬 배터리 없음 / super capacitor. Valve body metal construction, electric / electro-hydraulic actuator. Compliant with IATA DGR Class 9 제한되지 않은 물품, 일반 화물로 운송 가능.

인증:

CE: EN 준수 12516-1, 안에 60730

UL: Compliant with UL 1995 industrial control standard

CSA: 캐나다 전기 안전 승인

ATEX: Suitable for potentially explosive atmosphere (actuator certified separately)

ISO 9001: Quality management system certification

Environmental Certification: RoHS 준수, free of lead, 수은, 카드뮴; meets REACH regulations.

9. 구매 & Inventory Information