Disjuntor Chint Série NBH8-40

O Chint circuit breaker NBH840 series is a smallsized circuit breaker specifically designed for terminal power distribution in residential, comercial, and industrial settings. The following is a detailed analysis of its core information:

1. Technical Parameters and Functional Features
2. Parâmetros Básicos

Tensão nominal: CA 230 V (suitable for singlephase circuits).

Corrente nominal: Ranging from 1A to 40A (such as 1A, 2UM, 3UM, 4UM, 6UM, 10UM, 16UM, 20UM, 25UM, 32UM, 40UM), meeting different load requirements.

Número de poloneses: 1P+N (cutting off the phase wire and the neutral wire simultaneously), enhancing safety.

Interrupting Capacity:

NBH840: 4500UM (conventional type).

NBH840H: 6000UM (high interrupting type), suitable for scenarios with high shortcircuit currents.

Características de disparo: Tipo B (tripping at 35 vezes a corrente nominal, suitable for resistive loads) and Type C (tripping at 510 vezes a corrente nominal, suitable for inductive loads).

2. Projeto de Segurança

Twopole Cutting of Phase Wire + Neutral Wire: Avoids the risk of electric shock caused by incorrect wiring or potential shift of the neutral wire.

Energystorage Operating Mechanism: The closing speed of the contacts is not affected by manual operation, reducing arc burning and extending the service life.

High Protection Level: IP20 protection prevents the intrusion of foreign objects.

3. Certificações e Padrões

Está em conformidade com GB/T 10963.1 (Chinese standard), IEC/EN 608981 (international standard), and has passed multiple certifications such as CCC, CE, SEMKO, VDE, etc..

1. Cenários de aplicação
2. Distribuição de energia residencial

Used for overload and shortcircuit protection of branches such as lighting, sockets, and air conditioners to ensure the safety of household electricity use.

2. Commercial and Industrial Applications

Suitable for terminal power distribution in places such as office buildings, hotéis, and small factories, protecting lowpower equipment and circuits.

3. Ambientes Especiais

The operating temperature range is from 5°C to +40°C, with a pollution degree of Level 2, and it can operate stably in ordinary environments.

When the altitude is ≤ 2000m, there is no need to derate. When it exceeds this height, refer to Chint’s official derating factor table.

III. Installation and Accessories

1. Método de instalação

Instalação ferroviária: Using the TH357.5 standard rail, it supports quick plugging and unplugging, saving space.

Wiring Requirements:

The crosssectional area of the copper wire needs to match the current specification (por exemplo, 16A corresponds to 1.5mm², and 40A corresponds to 6mm²).

The tightening torque is 1.5N·m to ensure reliable contact.

2. Optional Accessories

Auxiliary Contact (XF9): Used for remote signal indication (such as the status feedback of the circuit breaker).

Shunt Trip (S9): Supports remote control of opening (requires an external 24V power supply).

Undervoltage Release (V9): Automatically cuts off the circuit when the voltage is abnormal.

1. Preço e canais de compra
2. Faixa de preço

The price of a singlepole (1P+N) circuit breaker is approximately [incorrect price data here]. The specific price depends on the current specification and interrupting capacity (por exemplo, the price of the NBH840H high interrupting type is slightly higher).

There may be discounts for bulk purchases or through dealer channels.

2. Canais de compra

Online Platforms: [Incorrect information here]

1. Common Problems and Maintenance
2. Frequent Tripping of the Circuit Breaker

Cause: The load current exceeds the rated value, the circuit is shortcircuited, or the wiring is loose.

Solution: Check the load power, troubleshoot the shortcircuit point, and tighten the wiring terminals.

2. Inability to Close the Circuit Breaker

Cause: There is still a short circuit in the circuit, or the tripping mechanism has not been reset.

Solution: Eliminate the shortcircuit fault and manually reset the tripping handle.

3. Accessory Compatibility

Some accessories (such as the S9 shunt trip) need to match the circuit breaker model. It is recommended to consult the supplier or refer to the manual.

4. Vida útil

The mechanical life is 10,000 vezes, e a vida elétrica é 20,000 vezes. Regularly check the wear condition of the contacts.

1. Alternative Models and Discontinuation Status

Modelos Alternativos: Chint mainly promotes the NXB series (such as NXB40), which has a higher interrupting capacity (6o), and its size is compatible with the NBH840, e pode ser substituído diretamente.

Discontinuation Status: The NBH840 series is still available from some dealers, but Chint’s official website has gradually reduced the promotion of this series. It is recommended to give priority to the NXB series to ensure longterm support.

VII. Precauções

1. Model Selection Suggestions

Select the Type B or Type C tripping characteristics according to the load type (resistive/inductive).

The rated current should be greater than the maximum load current (it is recommended to reserve a 20% margin).

2. Installation Specifications

Installed by a professional electrician to ensure correct wiring and firm fixing of the rail.

Avoid using it in humid and corrosive environments.

3. Safety Tips

Cut off the power supply before maintenance to prevent electric shock.

Regularly check the status of the circuit breaker and replace aging components in a timely manner.

For further information, you can visit [Chint Electric’s official website] or contact the customer service to obtain the product manual and information of authorized dealers.

Please note that the content in the original text with incorrect or unclear information (such as the incorrect price data and the wrong online platform information) has been noted in the translation. You may need to correct and supplement this information for a more accurate description.