CHNT CJX2-4011 Contactor AC

CJX2-4011 is a 3-contactor AC poli from CHNT’s classic CJX2 series, with a 40A rated current and equipped with 1 NU + 1 Contacte auxiliare NC.

It is suitable for AC-3 duty (de ex., three-phase motors) and widely used in industrial motor control, power distribution switching, și sisteme de automatizare. It is a cost-effective choice from a leading domestic brand.

1. Model & Explicația numărului piesei

2. Specificații tehnice de bază

3. Caracteristici & Avantaje
4. High-reliability contact system

Silver alloy contacts offer good conductivity, anti-welding, and arc resistance

32-sheet silicon steel core for stable, low-noise operation (≤55dB)

Red copper coil + flame-retardant housing for high temperature resistance

2. Dual mounting flexibility

Standard 35mm DIN rail for quick installation

Also supports screw mounting for panel installation

3. Energy saving

Low power consumption for long-term operation

Stable coil pull-in, reduced control circuit energy use

4. Strong compatibility

Directly matches CHNT NR2 series thermal overload relays

Dimensions compatible with Schneider LC1-D40 series for direct replacement

4. Instalare & Wiring Guide

4.1 Cerințe de instalare

DIN rail: Clip onto 35mm standard rail and ensure full locking

Screw mounting: Use M4 screws on a flat surface with ≥10mm clearance for heat dissipation

Prefer vertical installation; avoid horizontal mounting

4.2 Specificații de cablare

4.3 Key Wiring Notes

Do NOT mix main pole and coil terminals

Securely crimp wires to avoid overheating

When used with a thermal relay, connect it after T1/T2/T3

5. Aplicații tipice

Three-phase motor control: 7.5kW~18.5kW pumps, fani, transportoare

Distribuția de energie industrială: cabinet switching, capacitor bank control

Automated production lines: PLC-controlled start/stop and interlock

Building systems: HVAC, lifturi, fire pumps

Masini-unelte: strunguri, mașini de frezat, drilling machines

6. Replacement Models & Compatibilitate

6.1 CHNT Upgraded Replacements

6.2 Cross-Brand Equivalents

7. de cumpărare & Sfaturi de utilizare
8. Autenticitate

Buy via official channels to avoid counterfeits

Verify model, tensiunea bobinei, and poles

2. Accesorii

Must use with NR2 thermal relay for motor overload protection

Surge suppressor (SR2 series) recommended for frequent switching

3. Selection Rules

AC-3 for motors; AC-1 for resistive loads

Coil voltage must match control power

Higher protection grade for dusty/humid environments

4. Întreţinere

Check terminal tightness every 6–12 months

Clean contacts and replace if worn

Energize briefly before long-term storage

> Nota: CJX2-4011 is a general-purpose contactor with high cost-performance, aprovizionare stabilă, and easy replacement. Widely used in machinery, chimic, building materials, light industry.

Complete CHNT AC Contactor Series-Models & Coduri de comandă

Core Overview

CHNT AC contactors cover 5 main series:

CJX2 (classic), NXC (Kunlun upgrade), NC1 (industrial IEC), NC2 (curent mare), NC8 (high voltage heavy duty).

Models are coded by current + contacte auxiliare + tensiunea bobinei.

Order codes start with 710010xxxx and cover 6A ~ 1250A.

1. CJX2 Series (Clasic, fiind eliminate treptat)

Aplicație: Small-medium motors, 35mm șină DIN, compatible with Schneider LC1-D.

> Nota: 01=1NC, 10=1NO, 11=1NO+1NC. Coil voltages: AC24/36/110/220/380V. Last 3 digits = voltage code.

2. NXC Series (Kunlun Upgrade, Mainstream)

Aplicație: CJX2 replacement, smaller, lower power, viaţă mai lungă.

> Nota: Z = DC coil (de ex., NXC-12Z DC24V); M = mechanical latching.

3. Seria NC1 (Industrial IEC Standard)

Aplicație: International standard, fiabilitate ridicată, operare frecventă.

> Nota: NC1-N = reversing contactor. Z = DC coil.

4. Seria NC2 (High Current Industrial)

Aplicație: Heavy motors & main circuits up to 800A.

> Nota: 3P/4P available. Excursie cu șunt, undervoltage release optional.

5. NC8 Series (High Voltage Heavy Duty)

Aplicație: Up to 1140V, 2650A for metallurgy, minerit, marine.

> Nota: M = mechanical latching. 4P for 3P+N systems. DC coil available.

6. General Selection & Regulile codului de comandă

6.1 Model Coding

6.2 Order Code Format

Standard: 710010xxxxxxx

Exemplu:

CJX2-4011 AC220V → 710010200403220

NXC-12 DC24V → 710010100000500Z

6.3 Puncte cheie de selecție

1. Încărca: AC-3 for motors; AC-1 for resistive loads
2. Coil voltage must match control power
3. Contacte auxiliare: 10, 01, 11, 22
4. Polonii: 3P pentru trifazat; 4P for 3P+N
5. Comparație de serie & Recomandare