Customized Single-End Cartridge Heaters

When ordering customized single-end cartridge heaters for molds, please provide all the following parameters in one go, so we can offer an accurate quotation.

1. Mandatory Core Parameters
2. Tube Diameter (Outer Diameter)

de ex.: 6mm / 8mm / 10mm / 12mm / 16mm / 20mm, etc.

2. Total Length

Overall length including heating section + cold section (Unit: mm)

3. Effective Heating Length

Length of the actual heating zone; the cold end does not generate heat.

4. Tensiune de operare

Common options: 220V / 380V / 110V / 24V / 36V

5. Putere nominală

de ex.: 300W / 500W / 800W / 1KW / 2KW, etc.

If power is unknown, provide: heating medium, target temperature, and heating-up time for factory calculation.

6. Lead Wire Type / Lead Wire Length

Direct lead wire: silicone wire / Teflon wire, specify length

With terminal posts / junction box

Single-end wire outlet direction

7. Sheath Material

Common options:

Stainless Steel 304 (standard molds, ≤450℃)

Stainless Steel 321 (medium-high temperature, ≤600℃)

Stainless Steel 310S (high-temperature molds, ≤800℃)

Incoloy (ultra-high temperature, corrosion resistant)

1. Common Custom Structural Parameters (Opțional)
2. With or Without Retaining Plate / Locating Plate

Provide diameter, thickness and position of the plate.

9. With or Without Thread

de ex.: M8 / M10 / M12 / M14 / M16 / M20

Provide thread length and position.

10. Sealing Type

Ordinary adhesive sealing

High-temperature sealing

Waterproof / moisture-proof sealing

11. Mediul de aplicare

Mold heating (plastic mold / die-casting mold)

Dry heating

Liquid heating

Temperature requirement: maximum operating temperature

12. Tolerance Requirements

Diameter tolerance, length tolerance, and fitting requirements.

III. Optional Parameters for Extended Service Life

Internal heating wire material (NiCr 2080 / FeCrAl)

Magnesium oxide grade (standard / high-temperature high-density)

With or without tube reduction and annealing treatment

With or without thermocouple hole (can be built-in K-type thermocouple)

For mold applications, the simplest standard specification format is as follows:

> Single-end cartridge heater, diameter Φ10mm, total length 200mm, heating length 150mm, 220V 600W, 304 material, 150mm silicone lead wire, with retaining plate.

Need me to generate a ready-to-send standard parameter text based on your mold dimensions?

Single-End Cartridge Heater (Single-End Heater / Cartridge Heater)

A single-end mold cartridge heater is a tubular electric heating element with wiring only at one end, mainly used for efficient heating in confined spaces or complex molds. It is widely applied in injection molding, die-casting, plastic molding and other industrial fields.

1. Core Structure & Principiul de lucru

Principiul de lucru: Electric current passes through the resistance wire to generate heat, which is transferred through magnesium oxide powder to the metal sheath and then to the mold, achieving precise temperature control.

1. Caracteristici cheie & Avantaje
2. Dimensiune mică, high power density: Power per unit area up to 2.5–50W/cm², ideal for rapid heating
3. High thermal efficiency (≥90%): Concentrated heating, fast thermal response, steep temperature rise curve
4. Instalare ușoară: Single-end wiring design, insertable into mold holes, adaptable to complex structures
5. Durabilitate ridicată: Fully sealed structure, shockproof and corrosion-resistant, service life up to 5,000–10,000 hours
6. Flexible customization: Customizable diameter, length, power, shape (U-type / threaded / flanged)

III. Specification Table

1. Aplicații
2. Plastic Molds: Injection / blow molding / extrusion molds, 200–400℃, improves molding quality
3. Die-Casting Molds: Zinc / aluminum / magnesium alloy die-casting, requires rapid heating and high-temperature resistance
4. Hot Runner Systems: Ensures uniform melt flow, increases production efficiency
5. Other Industries: Medical equipment, laboratory instruments, chemical reactors, sealing machinery, etc.
6. Selecţie & Power Calculation Guide
7. Core Power Formula
8. P = (M × cp × ΔT) / t + Qloss

M: Mold weight (kg)

cp: Specific heat of steel (≈470 J/kg·K)

ΔT: Temperature difference (℃)

t: Heating time (s)

Qloss: Heat loss (≈10–30% of total power)

2. Surface Load Reference

3. Dimension Matching Rules

Fit between heater and mold hole: H7/g6 or H7/f7 for tight contact

Effective heating length must cover the heating zone; cold end extends outside for wiring

Reserve 0.1–0.2mm for thermal expansion to prevent jamming

1. Instalare & Întreţinere

Etape de instalare

1. Ensure verticality and smoothness of mold holes to avoid scratching the heater surface
2. Clean holes and apply thermal grease / thermal adhesive to improve efficiency by 30–50%
3. Insert gently, avoid heavy knocking
4. Insulate wiring terminals properly, keep away from high-temperature areas
5. Use with temperature controller, recommended fluctuation ±1℃

Întreţinere & Înlocuire

1. Operate only after cooling to room temperature to prevent burns
2. Regularly clean carbon deposits / scale with fine sandpaper
3. Inspect lead wire insulation, replace if damaged
4. Replace heater if uneven heating or power drop occurs

VII. Common Issues & Soluții

Single-end cartridge heaters are the preferred heating solution for modern industrial molds due to their high power density, fast response and flexible installation.

Selection should consider mold material, target temperature, heating time, accurate power and surface load calculation. Proper installation and temperature control greatly improve productivity and product quality.

Need me to calculate total required power, recommend diameter / length / quantity and surface load based on your mold material, greutate, target temperature and heating time? Just provide these parameters.