EUCHNER CES-AZ-AES-02B Safety Relay

Comanda nr.: 104775

It belongs to the CES-AZ series, a Transponder Non-Contact Safety Evaluation Unit (integrat safety relay). It adopts Unicode (single coding), which only recognizes the uniquely taught actuator. It supports up to 2 read heads.

Specificații cheie

Max. number of read heads: 2 (CES-A-L… series read heads)

Safety level: Categorie 4 / PL e (ÎN ISO 13849-1)

Safety outputs: 2 relay safety outputs, each with 2 internally series-connected NO contacts for redundancy

Coding type: Unicode (single coding); only the last taught actuator will be identified.

Multi-code alternative: CES-AZ-UES-02B (Comanda nr. 105140, Multicode)

Additional interfaces: Start button monitoring (falling edge detection), external contactor feedback loop, TST test input, DIA diagnostic output, O1/O2 semiconductor status outputs

Montare: 35 mm șină DIN

Clasa de protectie: IP20 (only for cabinet installation)

Alimentare electrică: DC 24V (21~27V DC regulated power supply, clipoci <5%)

Consumul de energie: Aproximativ. 150 mA with relay energized

Terminale: Plug-in coded terminals, wire cross-section 0.25–2.5 mm²

Temperatura de functionare: -20℃ ~ +55℃, fara condens, relative humidity ≤80%

Gross weight: 0.299 kg

HS Customs Code: 85364110

ECLASS: 27-27-24-03 Safety-related transponder switch

Definiția terminalului

UB / 0V: Sursa de alimentare DC24V

J1, J2: Teach-in jumpers (to write actuator coding)

H11/H12, H21/H22: Signal for read head 1 & read head 2

SH1, SH2: Shield grounding for read heads

TST: Self-test input

S: Start button input (falling edge detection)

Y1/Y2: External feedback loop

13/14, 23/24: Two groups of safety relay outputs

DIA: Diagnostic output; O1/O2: Semiconductor status outputs for read heads

RESET pushbutton; Indicatoare LED: Putere, H1, H2, OUT safety status, DIA fault diagnosis

Tabel de comparație a seriei

Scenarii de aplicare

Caracteristica de bază

One evaluation unit monitors 2 safety gates/protection points simultaneously. The Unicode exclusive coding prevents bypass and replacement, ideal for high tamper-proof requirements. It works with non-locking CES read heads and locking CEM/CET safety interlocks (ÎN 1088).

1. Industria mașinilor-unelte (Cele mai comune)
2. Centre de prelucrare, CNC milling machines & strunguri: Dual front + side safety doors. Immediate safe stop once any door opens. Paired with CET locking read heads to keep doors locked until spindle coasts to rest.
3. Mașini de șlefuit, high-speed saws & prese de poanson: Two protective covers for high-speed rotating and reciprocating motions, meeting PL e safety requirements.
4. Laser cutting & plasma cutting machines: Upper and lower material loading doors; laser emission is only enabled when both doors are fully closed.
5. Linii de producție automatizate & Assembly Equipment
6. Robot workcells (fencing): Two access gates for the robot enclosure; robot stops immediately if a gate opens during operation.
7. Custom assembly machines, hydraulic presses & mașini de nituit: Front maintenance door + side material feed door with interlock logic.
8. Transportoare, mașini de transfer & rotary lifting stations: Service access gate + bypass protection gate.
9. Turnare prin injecție & die-casting machines: Mold safety door + barrel protective door with lock function to prevent opening during mold clamping and melt processing.
10. Ambalare, Imprimare, Baterie cu litiu & 3C Equipment
11. High-speed packaging, laminating & mașini de tăiat: Two rotary roller guard doors.
12. Li-ion winding machines, mașini de umplere cu electroliți & formation cabinets: Dual chamber doors to prevent high-voltage hazards and mechanical pinch injuries.
13. Mașini de plasare SMT, AOI testers & FPC equipment: Front and rear maintenance hatches.

Avantaj: Non-contact design with no mechanical wear, long service life and resistance to dust and oil contamination.

4. Manipularea materialelor & Warehouse Equipment
5. Vertical elevators & ascensoare: Upper and lower level protective doors.
6. Sisteme de sortare & sortare cu centuri încrucișate: Two fence service doors.
7. Small AGV and tooling trolley cabin hatches.
8. Mâncare & Mașini farmaceutice (Cleanroom Use)
9. Mașini de umplere, bottle washers & mașini de etanșare: Dual clean chamber doors.
10. Sterilization equipment: Chamber door + service door. Non-contact design avoids jamming and is easy to clean with no mechanical friction.

Nota: Select stainless steel food-grade read heads for this application.

6. Test Benches & Laboratory Tooling
7. High-voltage test stands & aging cabinets: Two safety hatches; Unicode coding prevents personnel from shorting safety circuits to access hazardous areas.
8. Impact and durability test rigs: Dual protective enclosure doors.

Ghid de selecție a modelului (Critic)

CES-AZ-AES-02B (Unicode)

Only recognizes the last taught actuator. Anti-tampering priority. For machines with safety audits and strict anti-bypass requirements.

CES-AZ-UES-02B (Multicode)

Accepts any actuator of the same series. Only used for position monitoring; easier maintenance without re-teaching after actuator replacement.

02B = Max. 2 read heads; choose 04B for 4 porti de siguranta.

Recommended Matching Read Heads

CES-A-LNN: Non-locking type, only for door position monitoring

CEM: Process lock for production process protection

CET: Personnel safety lock (door locked until machine stops coasting; ÎN 1088)

Aplicații nepotrivite

Mai mult decât 2 independent safety doors (select 04B or safety PLC instead)

Multiple gates requiring separate logic and different stop sequences (use a safety controller)

Simple door monitoring without anti-bypass requirements (UES version offers better cost performance)

EUCHNER CES-AZ-AES-02B (Comanda nr. 104775) Full Technical Data

Tip: Unicode (single coding) non-contact transponder safety evaluation unit, max. 2 read heads

1. Order & Coding Information

Comanda nr.: 104775

Coding type: Unicode (unique coding); only the last taught actuator will be recognized to prevent bypass replacement

Supported read heads: 2 unitati (CES-A-L… / CEM / CET series)

ECLASS: 27-27-24-03

HS Customs Code: 85364110

2. Performanță de siguranță (ÎN ISO 13849-1 / SI IEC 62061)

Safety category: Categorie 4

Performance level: PL e

SIL rating: SIL 3

PFHd: 1.3×10⁻⁸

Mission time: 20 ani

Safety architecture: Dual redundant relay safety outputs; each channel has 2 internally series-connected monitored NO contacts

3. Parametrii electrici
4. Supply voltage UB: DC 21~27V, rated DC24V (regulated power supply, clipoci <5%), UL Class 2 power supply required
5. Consumul de energie: Aproximativ. 150 mA with relay energized (excluding load of monitoring outputs)
6. Relay safety outputs (13/14, 23/24)

Tensiunea nominală de izolație: 250 V și

Max. tensiune de comutare: 250 V și / 30 În DC

Continuous thermal current Ith: 8 O

AC-15: 6 O / 230 V și; DC-13: 4 O / 24 În DC

4. External feedback loop Y1/Y2

Loop current: 5~8~10 mA

Max. allowed loop resistance: 600 Oh

5. Intrări digitale (S Start, TST Test)

Low level: 0~2 V DC; High level: 15~27 V DC

6. Semiconductor monitoring outputs O1/O2, DIA

Tip: Ieșire tranzistor NPN, NOT safety outputs

Max. curent de sarcină: 100 mA

7. Terminale: Plug-in coded spring terminals, wire cross-section 0.25–2.5 mm²
8. Recommended external fuse: Max. 8A gG
9. Mecanic & Environmental Data

Dimensiuni de gabarit: 114 × 99 × 45 mm

Materialul carcasei: PA6.6 engineering plastic

Greutate: Aproximativ. 0.25 kg

Montare: 35 mm șină DIN (EN60715 TH35)

Clasa de protectie: IP20 (cabinet-only installation)

Gradul de poluare: 2

Temperatura ambiantă de funcționare: -20 ℃ ~ +55 ℃

Umiditatea relativă: ≤80%, fara condens

Poziția de montare: Orice orientare

5. Interfețe & Indicatori

Terminale: UB/0V power, H11/H12 (read head 1), H21/H22 (read head 2), SH1/SH2 shield, S Start, TST Test, Y1/Y2 feedback, 13/14 & 23/24 safety outputs, O1/O2 read head status, DIA diagnosis

Operating elements: RESET pushbutton, J1/J2 teach-in jumpers

Indicatoare LED: Putere, H1, H2, OUT safety status, DIA fault diagnosis

6. Read Head Compatibility

Reliable operating distance Sar: Max. 26 mm (depends on read head model)

Compatible types: Non-locking door monitors CES-A-LNN / CES-A-LCA; process interlocks CEM; personnel safety interlocks CET (ÎN 1088)

7. EMC & Standarde de conformitate

EMC standard: SI IEC 60947-5-3

Standarde aplicabile: ÎN ISO 13849-1, SI IEC 62061, ÎN 1088 (for guard lock applications)

8. Diferențierea modelului

CES-AZ-AES-02B: Unicode, anti-replacement, Cat.4 / PL e

CES-AZ-UES-02B (105140): Multicode, accepts any same-series actuator, întreținere mai ușoară

EUCHNER Safety Relay / Evaluation Unit Model & Lista de numere de comandă

Two main product lines: ESM standalone safety relays (de uz general) and CES-AZ transponder evaluation units (modelul dvs. țintă), plus CES-AR series for serial connection.

Nota: CES-AZ is a transponder decoding safety evaluation unit, generally referred to as a safety relay in the industry. All models meet Cat.4 / PL e (ÎN ISO 13849-1).

1. ESM Series General Safety Relays (Opri, poarta de siguranta, control cu ​​două mâini, extinderea contactului)

1) ESM-BA Non-Time-Delay Basic Modules (Cat.4)

2) ESM-BT Time-Delay Modules (Cat.4, adjustable 1~30s; fixed-delay versions available)

3) ESM-2H Two-Hand Control Modules (EN574 / Type IIIC)

4) ESM-ES Contact Expansion Modules (Non-delay, used with BA/BT main units)

5) ESM-TE Time-Delay Expansion Modules

6) ESM Accessories

1. CES-AZ Series Transponder Evaluation Units (Unicode AES anti-tamper / Multicode UES general type)

AES = Unicode (only recognizes taught actuators, anti-bypass); UES = Multicode (accepts any same-series actuator, întreținere ușoară)

III. CES-AR Serial Link Evaluation Unit (Max. 12 AR read heads wired in series)

Ghid de selecție rapidă

1. ESM-BA/BT: General safety relays for E-stop, regular safety gates and light curtains; no transponder decoding function.
2. CES-AZ-AES: Transponder-only type, anti-replacement & anti-cheating; for machine tools and automation with strict anti-bypass requirements.
3. CES-AZ-UES: Transponder-only type; no re-teaching needed after actuator replacement, preferred for mass-produced equipment.
4. CES-AR-AES-12: Long-distance serial connection for multiple safety gates, reduces wiring work.

I can export this whole text into pure plain text (without tables) for direct copy to Excel, or provide the wiring diagram + fault LED troubleshooting list in English. Do you need that?