Comutator de proximitate inductiv OMRON E2E-S05S12-WC-C1

Comutator de proximitate inductiv OMRON E2E-S05S12-WC-C1

1. Defalcarea modelului (Official Coding Rule)

Default suffix: 2M (2-meter cable; model complet: E2E-S05S12-WC-C1 2M); 5-meter version marked with suffix -R.

2. Specificații electrice de bază
3. Alimentare electrică: DC 10～30 V (3-wire DC)
4. Ieșire: NPN open collector, Deschis normal (NU); Max load current 100 mA
5. Distanța de Sentire: Standard 1.2 mm (±10% toleranță); detects ferromagnetic metals only
6. Response Frequency: Max. 4 kHz
7. Protection Circuits: Protectie inversa polaritatii, protectie la scurtcircuit la sarcina, surge absorption
8. Temperatura de operare: -25 ℃ ～ +70 ℃ (No condensation or icing)
9. Clasa de protectie: IP67; oil-resistant PVC cable material
10. Dimensiuni mecanice & Materiale

Thread Specification: M5×0.5, thread length 14 mm, overall length 25 mm

Locuințe: SUS303 stainless steel; sensing face: heat-resistant ABS

Accesorii standard: 2 lock nuts + serrated lock washers

Greutate: Aproximativ. 35 g complete unit (cu 2 m cablu)

Tip de montare: Shielded flush mount; can be fully embedded in metal brackets without side metal interference.

4. 3-Wire Wiring Definition (Standard 3-Color Cable)

> NPN Characteristic: When metal approaches the sensing face → conduction between black wire and blue wire; directly compatible with sink-type PLC inputs.

5. Cross-Series Equivalent Model Table

6. Instalare & Ghid de operare
7. Shielded Flush Mount: The sensor can be fully embedded in metal holes without sensing distance attenuation from surrounding metal.
8. Recommended actual sensing clearance: ≤0.8 mm (1.2 × 0.7, stable detection range)
9. 360° ring LED indicator for multi-angle status visibility
10. Rezistenta la vibratii: 10～55 Hz; Rezistenta la socuri: 500 m/s². Suitable for machine tools, automation jigs and miniature cylinder position detection.
11. Do not mount identical proximity switches side-by-side at close range (spacing ≥ 3 × M5 diameter to avoid mutual interference).
12. Scenarii tipice de aplicare

Miniature precision equipment: Mini cylinder position confirmation, tiny metal part counting, mold ejector pin detection, semiconductor jigs, miniature manipulator origin sensing, micro valve spool position detection.

8. Matricea de depanare

Cross-Brand Full Equivalent Model Table for OMRON E2E-S05S12-WC-C1

Base Matching Parameters (Mandatory for Direct Replacement)

M5 thread, Shielded Flush Mount (S), rated sensing distance 1.2 mm, 3-wire DC10–30V, NPN normal deschis (NU), 2 m straight PVC cable, IP67, carcasa din otel inoxidabil, overall length ≈25 mm.

1. Top European & American Brands (Factory-Grade Direct Replacement, No Parameter Adjustment)

2. Peer Japanese Brand Alternatives (Compatible with Industrial Control Equipment)

3. Domestic Standard Industrial Alternatives (Low-Cost Mass Replacement)

4. Key Replacement Judgment Criteria (Prerequisites for Direct Swap)
5. Tip de montare: Must be Shielded Flush Mount. Unshielded models suffer severe sensing distance attenuation and cannot be interchanged.
6. Distanța de Sentire: Evaluat 1.2 mm; models rated 0.8/1.0 mm lack sufficient margin and are not recommended for precision positioning.
7. Output Logic: C1 = NPN NO; suffix B1 = PNP, C2 = NPN NC. PLC input wiring modification required for mismatched output types.
8. Cable Type: WC = 2 m straight oil-resistant PVC cable. Connector-type (mufa M8) models cannot be directly replaced and require cable rework.
9. Universal Wiring Standard: All 3-wire M5 proximity switches share unified color coding: Brown=24V+, Blue=0V, Black=Signal output; no wire sequence adjustment needed.
10. Model Selection Risk Reminders
11. BALLUFF / Pepperl+Fuchs support 200 mA load current, while original OMRON only supports 100 mA. No impact for small loads; no current limiting required for heavy loads.
12. FESTO and SICK feature higher response frequency (4–5 kHz), preferred for high-speed counting applications.
13. Domestic alternatives have slightly weaker low-temperature resistance; European/Japanese original sensors recommended for equipment operating below -20 ℃.
14. For imported precision equipment (semiconductor, mold industry), prioritize BALLUFF, KEYENCE or original OMRON sensors.

Application Scenarios of OMRON E2E-S05S12-WC-C1 (M5 Flush Mount 1.2 mm NPN NO Miniature Proximity Switch)

Core Features Overview

Miniature M5 thread, shielded flush mount, ultra-short 1.2 mm distanta de detectare, dimensiune compactă, IP67 rating, oil-resistant cable outlet, NPN sink output. Ideal for confined installation spaces and high-precision positioning of tiny metal workpieces.

1. Precision Automation Equipment (Most Common Scenarios)
2. Mini Cylinder / Mini Slide Position Detection

Inductive limit sensing for miniature pneumatic cylinders, needle cylinders and finger cylinders to confirm fully extended/retracted origin positions. The slim M5 thread fits directly into front mounting holes of cylinders; flush mounting avoids collision with workpieces.

2. Miniature Jig Positioning

Position confirmation for locating pins on electronic jigs and carriers to ensure full seating of metal pins and prevent offset machining. Scurt 1.2 mm sensing distance eliminates false triggering from faraway targets.

3. Mini Manipulator Origin & Limit Detection

Upper/lower Z-axis limit and rotary axis origin reset for desktop miniature robots and dispensing machines. Ultra-compact body fits tight internal machine space.

4. Tiny Metal Part Presence Detection

Material presence check for screws, shrapnel, ace, small stamped parts and miniature nuts to avoid empty-cycle machining.

2. Semiconductor & 3C Electronics Industry
3. Chip Packaging Equipment

Position detection for lead frames, metal carrier tapes and metal suction nozzle bases. Precision compact internal cavities only accommodate M5 miniature probes.

2. PCB Processing Equipment

Clamping confirmation for metal buckles on small jigs; retraction sensing for micro punch pins and ejector pins.

3. Mobil & Digital Accessory Assembly Machines

Feeding detection for micro metal shrapnel, rotating shafts and tiny screws; reset confirmation for miniature mold ejector pins.

3. Mold, Turnare prin injecție & Stamping Industry
4. Mini Mold Ejector Pin Retraction Confirmation

Retraction detection for fine ejector pins on precision small molds and connector molds to prevent mold collision from unretracted pins. Flush embedded mounting on mold plates avoids scratching finished products.

2. Micro Stamping Die Strip Position Detection

Feed position sensing for thin metal strips to control stamping start/stop; short sensing distance eliminates false detection of thin materials.

3. Sprue & Small Metal Scrap Detection

Drop detection of metal workpieces in miniature blanking channels.

4. Medical Device Automation
5. Medical Consumable Assembly Equipment

Clamping detection for metal tube bases, metal buckles and miniature fixtures. Curat, compact machine design; IP67 waterproof rating allows simple washdown.

2. Micro Pump & Mini Valve Spool Position Feedback

Open/closed position detection for micro metal spools, installable inside narrow valve bodies.

5. Ambalare & Mini Conveying Equipment
6. Counting of Micro Metal Fittings on Production Lines

Count small hardware parts, springs and rivets; suitable for narrow channel installation.

2. Mini Fixture Clamping Confirmation

Position signal from metal pressure heads on compact packaging jigs to trigger box sealing and cutting actions.

6. Hidraulic & Pneumatic Valve Manifolds, Fluid Equipment
7. Micro Solenoid Valve Spool Position Feedback

Stroke detection of internal metal spools on compact valve islands to confirm full valve switching.

2. Mini Hydraulic/Pneumatic Actuator Limit Sensing

End-of-stroke detection for micro linear actuators.

7. Mașini-unelte & Small Processing Equipment
8. Mini Index Table Origin Positioning

Zero-point detection of metal stops on micro indexing tables for high-precision positioning.

2. Mini Jig Limit Sensing for Grinders & Engravers

Position sensing for metal reference blocks on small tooling fixtures.

8. laboratoare & Mini Testing Instruments
9. Micro Probe Position Detection for Precision Test Jigs

Contact confirmation of miniature fixtures on electronic testers and impedance analyzers.

2. Limit Sensing for Automated Small Sample Carriers

Selection Criteria for This Sensor (When to Prioritize E2E-S05S12-WC-C1)

1. Confined installation space requiring slim M5 threaded sensors;
2. Targets are tiny metal components, short 1.2 mm sensing distance required to avoid false triggering;
3. Flush embedded mounting needed without sensing distance attenuation from side metal housings;
4. Equipment paired with Japanese-brand PLCs (sink input compatible with NPN output);
5. Equipment exposed to cutting fluid and machine oil, requiring oil-resistant PVC cable and IP67 protection;
6. Micro stroke movement requiring short-distance trigger sensing only.

Unsuitable Application Scenarios

1. Applications requiring long-distance sensing (≥2 mm metal detection);
2. Large-size metal workpieces and wide-channel conveying lines;
3. Heavy dust environments or permanent submerged underwater installation;
4. Systems requiring PNP source input without wiring modification options (select equivalent B1 model as replacement).