P3U30-5AAA3BBAC Releu numeric de protecție integrat Schneider

P3U30-5AAA3BBAC is a general-purpose numerical integrated protection relay from the Schneider Electric Easergy P3 Series, also commonly referred to as a “numerical protection relay” or “protective relay device”. It is mainly used for the protection, controla, măsurare, and monitoring of feeders, transformatoare, motoare, and other equipment in medium‑ and low‑voltage power systems.

In‑Depth Model Code Analysis (Schneider P3 Series Standard Naming Convention)

Segment de cod	Sens	Descriere
P3U30	Basic Model	P3 = Easergy P3 Series; U = Universal Protection; 30 = 30TE standard size (aproximativ. 190×190 mm)
5	Protection Configuration	5 = Standard feeder protection package (including overcurrent, instantaneu, defect la pământ, reclosing, and other basic functions)
AAA	Măsurare & Intrări	1st A = 3CT (3 current transformer inputs); 2nd A = 1Io (1 residual current input); 3rd A = 4VT (4 voltage transformer inputs: 3 faze + neutru)
3	Interfață de comunicare	3 = Dual RJ45 Ethernet ports (supports mainstream protocols such as Modbus TCP, IEC 61850)
BB	I/O digitală	1st B = 16DI (16 intrări digitale); 2nd B = 8DO (8 iesiri digitale)
O	Auxiliary Power Supply	A = Wide‑range 48–230 V AC/DC power supply (adapts to various on‑site power conditions)
C	Tensiune de intrare digitală	C = 220–230 V AC/DC (rated voltage for digital input circuits)

Parametrii tehnici de bază & Specificații

3.1 Parametrii electrici

Categoria parametrilor	Caietul de sarcini
Auxiliary Power	48–230 V AC/DC, 50/60 Hz, toleranţă +10% / –15%
Intrări digitale (DIN)	16 canale, 220–230 V AC/DC, opto‑isolated, response time ≤ 1 Domnișoară
Ieșiri digitale (DO)	8 canale, ieșiri releu, contact rating 250 V și / 10 A or 24 În DC / 10 O
Intrări analogice	3 phase currents (CT), 1 residual current (Io), 4 voltages (VT)
Precizia măsurătorilor	Current/Voltage: Clasă 0.2; Power/Energy: Clasă 0.5

3.2 Funcții de protecție (Feeder‑specific Configuration)

Protecție la supracurent (IDMT / definite time selectable)

Instantaneous overcurrent protection (directional optional)

Protectie defect de pamant (definite time / IDMT)

Auto‑reclosure function (multi‑shot optional)

Protectie la suprasarcina (alarma / trip selectable)

Voltage protection (supratensiune / subtensiune / dead voltage)

Frequency protection (overfrequency / underfrequency)

Non‑electrical protection (accepts temperature, presiune, etc.)

3.3 Communication Capabilities

Două porturi Ethernet RJ45, supporting IEC 61850 ed.2, Modbus TCP, DNP3 TCP, EtherNet/IP

Optional RS485 serial port (Modbus RTU)

Supports network time synchronization (SNTP) and event recording (SOE, rezoluţie 1 Domnișoară)

3.4 Caracteristici fizice

Dimensiuni: 30TE standard (aproximativ. 190×190×180 mm)

Montare: Montare încasată (panel mounting) or DIN‑rail mounting

Protecție la intrare: IP40 (faţă), IP20 (per total)

Temperatura de functionare: –25 °C până la +70 °C; Temperatura de depozitare: –40 °C to +85 °C

Greutate: aproximativ. 2.5 kg

Aplicații tipice
Medium‑/Low‑Voltage Feeder Protection: 10 kV / 20 kV / 35 kV distribution feeders, enabling fast fault clearance and power restoration via auto‑reclosing
Protecția transformatorului: Diferenţial, supracurent, temperature protection for distribution transformers (with matching CT/VT configuration)
Protecția motorului: Starting and running protection for HV motors, including stall, suprasarcina, pierdere de fază, defect la pământ, etc.
Capacitor Bank Protection: Supracurent, supratensiune, unbalance protection for reactive compensation capacitor banks
Sisteme de automatizare industriale: Front‑end device for SCADA systems, providing accurate electrical measurement and equipment status monitoring
Avantajele produsului & Caracteristici
Design modular: Protection functions flexibly configurable via software to suit various applications
Fiabilitate ridicată: Based on Schneider Sepam, MiCOM, and Vamp platforms, compliant with strict EMC tests (IEC/EN 60255)
Comprehensive Measurement: Real‑time monitoring of 30+ parametrii electrici: actual, Voltaj, putere, energie, frecvenţă, armonici, etc.
Flexible Communication: Supports multiple industrial protocols, easily integrated into smart grids and automation systems
User‑friendly: Chinese UI, local keypad operation, remote network configuration, built‑in fault recording (1024 points per cycle)
Modele alternative & Accesorii

6.1 Modele alternative (Different Configurations in the Same Series)

Model alternativ	Principalele diferențe	Aplicație
P3U30-5AAA1BCAA	1×RJ45 + 1×RS485, DI = 24 V	Legacy system upgrades requiring RS485
P3U30-5AAA2BBAB	Single RJ45, auxiliary power = 110 V	Sites with specific voltage levels, simplified configuration
P3U30-5AAA3BDAA	Added arc‑flash protection	Fast protection for internal switchgear faults

6.2 Accesorii recomandate

Cablu de comunicație: UTP Cat5e/Cat6 for Ethernet

module I/O: Expand DI/DO up to 32DI/16DO

HMI panel: Opțional, for local operation and data display

Test tool: Dedicated P3 series software for setting configuration and fault analysis

Instalare & Operation Notes
CT/VT Wiring: Strictly observe polarity to avoid maloperation or inaccurate measurement
Alimentare electrică: Ensure auxiliary power matches rating; surge protection recommended
Comunicare: Assign static IP to avoid conflicts
Setting Tuning: Set protection values appropriately according to on‑site equipment parameters
Întreținere regulată: Annual function test, accuracy calibration, and communication/version check recommended

As a mainstream model of the Schneider Easergy P3 Series, the P3U30-5AAA3BBAC is widely used in power system protection and monitoring in industrial, energie, and infrastructure fields. It is an ideal choice for the intelligent construction of medium‑ and low‑voltage power grids.

Complete Model Guide for Schneider Easergy P3 Series

(Including Full Range Related to P3U30-5AAA3BBAC)

The Schneider Easergy P3 Series numerical protection relays are divided into Standard (P3U) and Advanced (P3x) lines, covering feeders, transformatoare, motoare, generators, and other applications in medium‑/low‑voltage grids. All models are explained below by application, including key differences and suitable scenarios.

Standard Universal Protection Relays (P3U Series)

Suitable for general feeders, motoare, transformatoare, cost‑effective and flexible.

Model	Dimensiune	Funcții de bază	Configurație tipică	Aplicație
P3U10	10THE (96×96 mm)	Basic overcurrent, no voltage measurement	P3U10-5AAA1BBAA	Simple feeders
			– 3CT+1Io, no VT	Small distribution circuits
			– 1×RJ45	Basic protection with limited budget
			– 16D/8C
P3U20	20THE (96×190 mm)	Standard overcurrent + direcțională, with voltage measurement	P3U20-5AAA2BBAC	Directional feeders
			– 3CT+1Io+4VT	Small/medium transformers
			– 1×RJ45	Applications requiring voltage monitoring
			– 16D/8C
			– 48–230 V AC/DC
P3U30	30THE (190×190 mm)	Protectie completa + complete measurement + comunicare avansată	P3U30-5AAA3BBAC (original)	Complex feeders
			P3U30-5AAA3BDAA (arc‑flash)	Large transformers
				Dual Ethernet redundancy
				High‑precision measurement

P3U Series Model Code Supplement

Standard format: P3UXX-5AAA3BBAC

5th digit (5): Protection type: 5=feeder, 6=motor, 7=transformer

6th–8th (AAA): Analog inputs: AAA=3CT+1Io+4VT, ABA=4CT+1Io+3VT

9th (3): Comunicare: 1=1×RJ45+1×RS485, 2=1×RJ45, 3=2×RJ45

10th–11th (BB): I/O: BB=16DI/8DO, BC=24DI/12DO, BD=32DI/16DO

12th (O): Aux power: A=48–230 V AC/DC, B=110 V AC/DC, C=24 V DC

13th (C): DI voltage: C=220–230 V AC/DC, D=110 V AC/DC, E=24 V DC

Advanced Specialized Protection Relays (P3x Series)

For dedicated high‑performance protection with built‑in algorithms.

2.1 Feeder‑specific Advanced Protection

Model	Dimensiune	Funcții de bază	Configurație tipică	Aplicație
P3F30	30THE	Directional overcurrent + Voltaj + optional arc	P3F30-CGGIA-AAEOA	Complex feeders
			– 4CT+4VT	Ring networks
			– 2×RJ45+1×RS485	Switchgear arc‑flash protection
			– 22DI/13DO
P3L30	30THE	Line differential + distanţă + directional overcurrent	P3L30-LGGIA-AAEOA	Long transmission lines
			– 6CT+4VT	Critical lines
			– Dual IEC 61850	Ring network differential
			– 22DI/13DO

2.2 Motor‑specific Advanced Protection

Model	Dimensiune	Funcții de bază	Configurație tipică	Aplicație
P3M30	30THE	Protecția motorului + RTD temperature	P3M30-MGGIA-AAEOA	HV motors
			– 3CT+1Io+4VT	Critical motors with temperature protection
			– 16D/8C + RTD
			– Dual RJ45
P3M32	30THE	P3M30 + motor differential	P3M32-MGGIA-AAEOA	Motoare mari (≥2000 kW)
			– 6CT+4VT	Motor‑transformer units
			– Differential module
			– 22DI/13DO

2.3 Transformer‑specific Advanced Protection

Model	Dimensiune	Funcții de bază	Configurație tipică	Aplicație
P3T32	30THE	Transformer differential + non‑electrical + backup	P3T32-TGGIA-AAEOA	Distribution transformers
			– 6CT+4VT	Power transformers
			– WOG/pressure/temperature
			– 22DI/13DO

2.4 Generator‑specific Advanced Protection

Model	Dimensiune	Funcții de bază	Configurație tipică	Aplicație
P3G30	30THE	Protecția generatorului + sincronizare	P3G30-GGGIA-AAEOA	Small generators
			– 3CT+1Io+4VT	Backup generators
			– Frequency/voltage/sync
			– 22DI/13DO
P3G32	30THE	Generator differential + stator/rotor earth	P3G32-GGGIA-AAEOA	Large generators
			– 6CT+4VT	Main power generators
			– 100% stator earth
			– Rotor earth

Key Comparison Table (Related to P3U30-5AAA3BBAC)

Articol	P3U10	P3U20	P3U30	P3F30	P3M32
Dimensiune	10THE	20THE	30THE	30THE	30THE
Max I/O	16D/8C	24DI/12DO	32D/16C	32D/16C	32D/16C
Comunicare	Single Ethernet + Serial	Single Ethernet	Ethernet dual	Dual + Dual Serial	Dual + Dual Serial
Protecţie	Basic overcurrent	Supracurent + direcțională	Deplin + arc optional	Direcțional + Voltaj + arc	Motor differential + RTD
Precizie	Clasă 0.5	Clasă 0.5	Clasă 0.2	Clasă 0.2	Clasă 0.2
Aplicație	Simple feeder	Standard feeder/transformer	Complex feeder/transformer	Critical feeder/ring	Motor mare