Contactor Schneider Electric LC1D25

At a glance: The Schneider Electric LC1D25 is a TeSys D series 3-pole 25A contactor AC, suitable for AC-3 motor control (11kW/15HP at 400V). Standard width: 45mm. Supports DIN rail and screw mounting. Coil voltages available in multiple AC/DC ratings. Matching thermal overload relays: LRD16‑LRD32. Cross-brand replacements include ABB A16-30-10, Siemens 3RT6026-1AN20, etc.

Part Number Interpretation

Base model: LC1D25

Full model format: LC1D25[Contacte auxiliare][Tensiunea bobinei][Frecvenţă][Special Features]

Cod	Sens	Exemplu
LC1D	TeSys D series standard AC contactor	–
25	Rated operational current 25A (AC-3, 400V)	–
2010/1/11	Auxiliary contact configuration: 1NO/0NC, 0NO/1NC, 1NO/1NC	LC1D2510M7C (1NU)
M/Q/B/P	Coil voltage code: M=AC220V, Q=AC380V, B=AC24V, P=AC230V	LC1D2510M7C (AC220V)
7月5日	Frecvenţă: 7=50/60Hz universal, 5=50Hz only	LC1D2510M7C (universal)
C/BL	Special features: C=standard, BL=low-power	LC1D2510M7C (standard)

Key Specifications

2.1 Parametrii circuitului principal

Parametru	Valoare	Note
Polonii	3-pol (3NU)	Configurație standard
Rated operational current (AC‑3, 400V)	25O	Typical for motor control
Rated operational current (AC‑1, 690V)	40O	Sarcină rezistivă
Tensiune nominală de funcționare	≤690V AC, ≤300V DC	Circuitul principal
Motor power (400V 3-phase)	11kW (15HP)	Sarcina AC-3
Motor power (220V 3-phase)	5.5kW (7.5HP)	Sarcina AC-3
Tensiunea nominală de izolație	1000V	Standardul IEC
Tensiune nominală de rezistență la impuls	8kV	–

2.2 Parametrii circuitului de control

Parametru	Valoare	Note
Coil voltage range	AC24V~400V, DC24V~220V	Opțiuni multiple disponibile
Coil power	Inrush: ≤9.5VA, Deţinere: ≤2VA	Standard version; lower for low-power type
Pick-up voltage	85%~100% Un	–
Drop-out voltage	20%~75% Un	–
Frecvența de funcționare	Până la 3600 operațiuni/oră	Sarcina AC-3

2.3 Mechanical & Mounting Parameters

Parametru	Valoare	Note
Dimensiuni	45×85×92mm (fără acoperire) / 45×85×101mm (with cover)	Common for LC1D25–LC1D38
Montare	35mm DIN rail or screw mounting	Both compatible
Greutate	Aproximativ. 370g	Standard version
Protection degree	IP20	Body only
Temperatura de functionare	-5℃~+60℃	Wide-temperature version available
Mechanical durability	≥10 million operations	No-load
Electrical durability	≥1 million operations	At rated AC-3 conditions

Ghid de selecție

3.1 Load Type Matching

AC-3 (motor control): Direct use for motors up to 25A, max. 11kW at 400V

AC-1 (sarcină rezistivă): Up to 40A, suitable for heaters, iluminat, etc.

DC load: Confirm DC rating; derating to ≤70% of AC rating recommended

3.2 Coil Voltage Selection

Aplicație	Recommended coil voltage	Avantaj
Automatizare industrială	AC220V (M7) / AC380V (Q7)	Matches common factory voltages
Safety control circuits	AC24V (B7) / DC24V	Safety extra-low voltage
sisteme DC	DC24V~110V	Reduces electromagnetic interference

3.3 Auxiliary Contact Extension

Standard: 1NU + 1NC built-in auxiliary contacts

Expansiune: Add LAD series auxiliary modules; up to 4NO + 4NC

3.4 Protection Coordination

Protectie la suprasarcina: Use with LRD16‑LRD32 thermal overload relays (setare: 6.4~32A)

Protecție la scurtcircuit: Recommended C65N‑D/3P 32A or NSX series circuit breakers

Suprimarea supratensiunii: RC snubber for AC coils; freewheeling diode for DC coils

3.5 Montare & Heat Dissipation

Montați vertical; keep ≥5mm above/below, ≥2mm left/right

Derate 10–15% for side-by-side installation

Above 40°C, derate approx. 1% per °C increase

Cross-Brand Replacements

Marca	Înlocuire directă	Key Comparison
ABB	A16-30-10 (16O) / A26-30-10 (26O)	Same dimensions; A26 closer to 25A
Siemens	3RT6026-1AN20 (25O)	Identical mounting, 1NU+1NC
Mitsubishi	S-T25 (25O)	Standard 3-pole, AC220V/380V coils
LS	GMC-22 (22O) / GMC-32 (32O)	Eficient din punct de vedere al costurilor; GMC-32 for heavy duty
Chint	NC1-2510 (25O)	Domestic alternative, cost advantage

Common Full Models & Aplicații

Model complet	Descriere	Aplicație tipică
LC1D2510M7C	3P 25A, 1NU, AC220V coil, 50/60Hz	Water pumps, fani
LC1D2501Q7C	3P 25A, 1NC, AC380V coil, 50/60Hz	Compresoare, transportoare
LC1D2511B7C	3P 25A, 1NU+1NC, AC24V coil	Safety circuits, E-stop
LC1D25BL	3P 25A, low-power DC24V coil	Battery systems, energy-saving equipment

Schneider Electric LC1D25 Contactor Mounting Dimensions Manual

At a glance: Standard dimensions: W45mm × H85mm × D92mm (fără acoperire) / D101mm (with cover). Fits 35mm standard DIN rail. Screw mounting: 2×M4 slotted holes, horizontal center distance 35mm, vertical center distance 60–70mm adjustable.

Basic Outline Dimensions (W×H×D)

Configurare	Dimensiuni (mm)	Dimensiuni (în)	Note
Without cover	45 × 85 × 92	1.77 × 3.35 × 3.62	Standard bare version
With cover	45 × 85 × 101	1.77 × 3.35 × 3.98	With safety cover
Low-power type	45 × 85 × 99	1.77 × 3.35 × 3.90	de ex., LC1D25BL

Width 45mm: Common for LC1D25–LC1D38, compact mounting

Height 85mm: Base height without top auxiliary modules

Adâncime: Varies slightly by cover/coil; refer to actual unit

Mounting Methods & Detailed Dimensions

2.1 Montare pe șină DIN (Recomandat)

Fits 35mm standard DIN rail (ÎN 60715)

Locks onto center rear of contactor

Montați vertical (coil downward) for best cooling and stability

Clearance: ≥5mm top/bottom, ≥2mm left/right; derate 10–15% side-by-side

2.2 Screw Mounting

Parametru	Valoare	Note
Mounting holes	2×M4 slotted holes	For M4×8 or M4×10 screws
Horizontal center distance	35mm	Fix
Vertical center distance	60–70mm	Slotted for adjustment
Mounting plate thickness	1.5–3mm	Galvanized steel or insulation plate
Tightening torque	1.2–1.5N·m	Avoid damage

Add-On Module Dimensions

Top auxiliary modules (LAD series): W45mm, H≈20mm, depth unchanged

Side auxiliary modules: +≈18mm width per module, H and D unchanged

Relee termice de suprasarcină (LRD16‑LRD32): W45mm, H72.5mm, D79.9mm, direct snap-on

Mounting Precautions
Temperatura mediului ambiant: -5℃~+60℃; derate above 40℃
Avoid high vibration, praf greu, corrosive gases
Terminale: Circuitul principal (L1/L2/L3, T1/T2/T3) downward; bobina (A1/A2) on right
Leave gaps between adjacent contactors for ventilation

Pagini: 1 2