Contactor,întrerupător de circuit,invertor solar,contor electric,baterii solare
- In-depth Model Interpretation
| Segmentul de model | Descriere |
| XCKN | Familie de produse: OsiSense XC standard întrerupător de limită, compact Type A, carcasă din plastic |
| 2 | Tip conexiune: screw clamp terminals, suitable for 1×0.34mm²~2×1.5mm² wires |
| 1 | Configurarea contactului: 1 Deschis normal (NU) + 1 În mod normal închis (NC), snap action |
| 18 | Actuator type: thermoplastic roller lever, întoarcere de primăvară, side actuation |
| P20 | Cable entry: M20×1.5 thread, suitable for cables with outer diameter 7~13mm |
| C | Certification mark: compliant with Chinese CCC certification, suitable for domestic market |
- Parametrii tehnici de bază
Parametrii electrici
Tensiune nominală de funcționare: AC 240V, DC 125V
Curent nominal de funcționare: 10O (AC-15: 3A at 240V)
Tip de contact: 1NU + 1NC, contacte din aliaj de argint
Durabilitate mecanică: 10,000,000 operațiuni
Durabilitate electrică: 100,000 operațiuni (AC-15)
Minimum actuation torque: 0.1Nm, actuated with low operating force
Mecanic & Parametrii de mediu
Protecție la intrare: IP65 (IEC 60529), dust-tight and water-resistant
Insulation class: Clasa II (IEC 61140)
Temperatura de functionare: -25°C ~ +70°C
Temperatura de depozitare: -40°C ~ +70°C
Rezistenta la vibratii: 25gn (10~500Hz), conform cu IEC 60068-2-6
Rezistenta la socuri: 45gn (11Domnișoară), conform cu IEC 60068-2-27
Montare: Body mounting, suitable for 24/40mm rails
Dimensiuni: 108mm×58mm×36mm (L×L×A)
- Caracteristicile produsului & Avantaje
- Structural Benefits
All-plastic housing, ușoară (aproximativ. 120g), excellent corrosion resistance
30° cam actuation design for precise triggering and reduced misoperation
Roller lever can be installed with 360° rotation to adapt to various mounting angles
- Performance Assurance
Snap-action contacts (≤10ms) for fast signal response
Double-break contact design for improved breaking reliability
Built-in surge suppression circuit to protect control circuits
- Certificari de siguranta
Multiple certifications including CCC, UL, CSA for global use
Conform EN 50047, interchangeable with products to the same standard
- Aplicații tipice
| Câmp de aplicare | Specific Usage |
| Linii de producție automatizate | Position detection for robotic arms, conveyor positioning, workpiece in-position confirmation |
| Logistică & depozitare | Stacker limit protection, rack telescopic positioning, AGV path control |
| Lifting equipment | Elevator/goods lift upper/lower limits, lifting platform travel control, forklift lifting height restriction |
| Mașini de ambalare | Bag sealer cutting position, labeling machine positioning, cartoner in-position detection |
| Masini-unelte | Table travel limitation, tool change position detection, safety door interlock |
| Utilaje de constructii | Crane limit protection, concrete mixer level control, elevator door safety detection |
- Instalare & Ghid de cablare
Etape de instalare
- Select a flat and rigid mounting surface with sufficient operating space (≥50mm)
- Secure with M4 bolts (torque 2.5Nm) or mount on 24/40mm standard rails
- Adjust roller orientation to ensure proper contact with actuating parts (recommended contact angle 30°)
- Install M20 cable gland to maintain IP65 protection
Specificații de cablare
Incoming wire: 1×0.34mm²~2×1.5mm² stranded or solid wire
Cuplul terminalului: 0.8Nm, avoid over-tightening to prevent damage
Separate high-voltage (>24V) and low-voltage (<24V) control circuits to reduce interference
For long-distance wiring (>10m), shielded cable with single-end grounding is recommended
- lternative Models & Compatibility Solutions
Alternatives within Schneider Series
XCKN2118P12C: M12×1.5 cable entry, suitable for 4~8mm cables
XCKN2118G11C: PG11 cable entry, suitable for 6~12mm cables
XCKN2118P20: International version (without C mark), pentru proiecte de export
Alternative cross-brand
| Marca | Model alternativ | Compatibilitate |
| Omron | D4C-1320 | ★★★★☆ (Same electrical parameters, slight differences in mounting dimensions) |
| Siemens | 3SE5 232-0CH01 | ★★★★☆ (Protectie IP65, identical contact configuration) |
| ABB | LS35M-11 | ★★★★☆ (Same actuator type, matching actuation torque) |
- Selecţie & Purchasing Guidelines
- Trei factori cheie de selecție
Actuation type: confirm side or front actuation to select the corresponding actuator
Cable specification: choose M20/M12/PG11 entry based on on-site cable outer diameter
Circuit de control: select rated voltage model for AC/DC systems accordingly
- Purchasing Tips
Look for original Schneider packaging; XCKN series has unique anti-counterfeit codes verifiable on the official website
Avoid bulk or loose-pack products; items without CCC certification are prohibited for domestic use
Require suppliers to provide product certificates and type test reports
- garanție & Serviciu post-vânzare
Standard warranty period: 18 luni
Fault response: technical support from authorized Schneider service providers within 48 ore
Repair & înlocuire: free replacement for non-artificial damage
- Depanare
| Simptom | Cauza posibila | Soluţie |
| Contacts do not actuate | Insufficient actuation force | Adjust mounting position to ensure actuation torque ≥0.1Nm |
| Contacts welded closed | Overcurrent operation | Check control circuit current to ensure it is within rated value |
| Loss of protection | Loose cable gland | Retighten M20 connector and replace damaged sealing ring |
| Fluctuația semnalului | Poor wiring connection | Check terminal torque and re-crimp wires |
Recomandare de selecție:
XCKN2118P20C is a highly versatile standard limit switch, especially suitable for position detection and safety protection in automation equipment, logistics systems and construction machinery. For special environmental applications, carcasa din otel inoxidabil (XCKJ series) or high-temperature resistant type (XCKT series) poate fi considerată.
