Чинт NXBLE63 – 2П/С40

Чинт NXBLE63 – 2P/C40 is a 2 – столб (2П) miniature residual current circuit breaker. Its main parameters and functions are as follows:

Основные параметры

Номинальный ток: 40А (“С40” indicates that the tripping characteristic is Type C and the rated current is 40A);

Номер полюса: 2П (cuts off both the live wire and the neutral wire simultaneously);

Защита от остаточного тока: Тип переменного тока (detects ordinary AC leakage). The residual operating current is usually 30mA (an industry conventional value, and some models support options such as 50mA/75mA);

Разрывная способность: 6тот (can safely cut off circuits with a short – circuit current of not less than 6000A);

Применимое напряжение: 230В (for single – фазовые цепи);

Mechanical/Electrical Life: The mechanical life is 20,000 раз, и электрический срок службы 10,000 раз.

Основные функции

1. Защита от остаточного тока: When there is electric shock to the human body (current ≥ 30mA) or equipment leakage in the circuit, the power supply is quickly cut off within 0.1 second to prevent electric shock casualties;
2. Защита от перегрузки: If the circuit load is too large (current exceeds 40A), it will automatically disconnect to avoid overheating and fire of the circuit;
3. Короткий – Защита цепи: When a short circuit occurs in the circuit (current increases sharply in an instant), the circuit is cut off immediately to protect electrical appliances and the circuit;
4. Функция изоляции: It can be used as a switch for infrequent on – off of the circuit under normal conditions.

Сценарии применения

Бытовое электричество: For high – power socket circuits in kitchens, living rooms, и т. д.. (например, кондиционеры, электрические водонагреватели), it replaces traditional air switches and adds residual current protection;

Маленький – scale Commercial Places: For socket or lighting circuits in convenience stores and offices, meeting the electricity demand within 40A;

Decoration and Renovation: Upgrading the residual current protection of old circuits to meet the new national standard’s requirement that “socket circuits must be equipped with residual current protection”.

Installation and Use Precautions

– It should be selected according to the actual load of the circuit to avoid “a big horse pulling a small cart” или “a small horse pulling a big cart”;

– Нажмите кнопку “кнопка тестирования (T key)” once a month to verify whether the residual current protection function is normal;

– When installing, the live wire (л) и нейтральный провод (Н) must be distinguished. If the wiring is reversed, the residual current protection function may fail.