Eaton CEAG GHG5114306R0001 Industrial Socket

Продукт: Explosion-proof Wall-mounted Industrial Socket (Ex Wall-mount Receptacle). German CEAG (Итон’s explosion-proof brand), GHG511 Series, CEE-type industrial socket for hazardous areas

Основные технические параметры

Элемент	Спецификация
Модель	GHG5114306R0001
Номинальный ток	16А
Номинальное напряжение	200‑250V AC (230В, 6час, blue colour‑code)
поляки	3П (L‑N‑PE)
Защита от проникновения	IP66 (maintained when plug is fully inserted)
Материал корпуса	Glass‑fibre‑reinforced polyester, black housing with blue socket insert
Терминал	Screw‑type terminals for 1.5‑4.0 mm² conductors
Кабельный ввод	1×M25 explosion‑proof cable gland, 1×M25 blanking plug
Рабочая температура	-20℃ ~ +40 ℃
Масса	Приблизительно. 1048 g
Explosion‑proof Certification	АТЕХ: II2G Ex ed IIC T6; II2D T60℃; Suitable for Zone 1/2 gas hazardous areas, Zone 21/22 dust hazardous areas
Применимые стандарты	IEC 60309‑2, IEC 60079 series

Model Decoding

GHG511: CEAG explosion-proof plug-and-socket series

4: Wall-mount receptacle

3: 3-столб

06: 6-hour phase position (230V blue code)

R0001: Версия / order suffix

Типичные сценарии применения

Chemical plants, масло & gas facilities, pharmaceutical plants, мины, flour/grain dust workshops, offshore platforms. Used as power interfaces for on-site maintenance and mobile equipment in Zone 1/2 gas hazardous areas and Zone 21/22 dust hazardous areas.

Mating Plug

Matching series plug: GHG5113306R0001 (16А, 3-столб, 6h explosion-proof plug)

Reference Equivalent Replacement Models

GHG5114306R0002: Same electrical specifications, different cable-entry configuration, differs only in order suffix.

Приобретение & Customs Information

Customs Tariff Code: 85366990 (Electrical sockets). Made in Germany. Typical import lead-time: 30-40 рабочие дни. Limited local stock in China; second-hand units are widely circulated.

Уведомление: Ordinary non-explosion-proof plugs must NOT be used with this unit. Replacement spare parts shall maintain identical explosion-proof rating. Ordinary IP66 industrial sockets cannot serve as direct substitutes.

Eaton CEAG GHG5114306R0001 Datasheet Key Extract

Surface-mount wall-mounted explosion-proof receptacle with integrated load-break switch. Permits make-and-break under 16A load. Never energise the socket without a plug fully inserted.

Full Technical Specifications

Элемент	Спецификация
Номер заказа.	GHG5114306R0001
Ряд	GHG511 (CEAG hazardous‑area plug‑and‑socket system)
Ratings	16А, 200‑250V AC, 6h phase position, blue 2P+E (3‑pole L‑N‑PE)
Explosion‑proof Certificates	ATEX II2G Ex ed IIC T6; II2D T60℃; IECEx certified; Zone 1/2 gas, Zone 21/22 dust
Защита от проникновения	IP66 (plug fully inserted). Do not energise without plug fitted.
Жилье	Black glass‑fibre‑reinforced polyester; chemical‑resistant, ударопрочный
Электропроводка	Винтовые клеммы, conductor cross‑section 1.5‑4.0 mm²
Кабельный ввод	1×M25 Ex‑gland, 1×M25 blanking plug; dual‑entry reconfiguration feasible
Температура окружающей среды	-20℃ ~ +40 ℃
Стандарты	IEC60309‑2, IEC60079 series, EN60947‑3
Mating Plug	GHG5113306R0001 (16А, 3полюс, 6h explosion‑proof plug)
Масса	Приблизительно. 1.05 кг

Установка & Operational Key Points (Manual Highlights)

Integrated load-break switch: Built-in switching mechanism allows 16A load-breaking operations. Ordinary non-Ex plugs are strictly prohibited.
Монтаж: Surface wall-mount via four fixing screws. Outdoor installation permitted; avoid heavily corrosive atmospheres.
Cabling: Must deploy certified explosion-proof cable glands matching M25 cable-entry size. Unused M25 openings must be sealed with original-equipment blanking plugs.
Обслуживание: Periodically inspect seals and housing for cracks. Explosion-proof mating surfaces must not be ground or dented. Replace complete unit upon damage; no unauthorised modification allowed.
Earthing: PE terminal shall be reliably earthed; earthing resistance shall comply with GB3836 requirements for explosion-proof equipment.
Spare-parts policy: Damaged sealing gaskets or cable glands must be genuine CEAG OEM spares. General-purpose gaskets do not satisfy Ex ed explosion-proof requirements.

Suffix Explanation

GHG5114306R0001: Single M25 cable-entry version

GHG5114306R0002: Dual M25 cable-entry version. Identical electrical performance; only cable-entry layout differs, direct mechanical interchangeability guaranteed.

Alternative Sourcing List

OEM Imported Direct Replacement

GHG5114306R0002: Eaton original, dual-M25 entry, функционально эквивалентный, more commonly-ordered part number.

Осторожность: GHG512 series is rated 32A; different current rating, не полная замена.

Domestic Chinese Equivalent Alternatives (Zone 1/2, Zone 21/22, Ex ed IIC T6, 16A 230V 3-pole, IEC60309-2 compliant)

⚠️ For project deployment, verify explosion-proof certificates, 6-hour phase position marking and IP66 rating. Many domestic units lack integrated load-break switches and shall only be disconnected under no-load conditions.

Huarong BLJ85-16/220-3 Explosion-proof Industrial Socket (Ex ed IIC T6, 16А, 3-столб, настенный)
Xianghua BCZ8050-16/3 Explosion-proof & anti-corrosion plug-socket assembly, GRP housing, suitable for Zone 1/2 hazardous areas

Critical Reminder: Original imported CEAG GHG511 features integrated load-break switch. Most conventional domestic explosion-proof sockets have no load-break capability and support only no-load mating/unmating. Confirm load-break requirement before selection.

Приобретение & Second-hand Unit Inspection Checklist