Omron E2E-X5ME1 Inductive Proximity Sensor

Статус: Old model discontinued (legacy E2E series), superseded by E2E-NEXT series

Интерпретация модели

E2E: Омрон стандартный inductive proximity sensor ряд

X5M: Non-shielded (non-flush mount), nominal sensing distance 5 mm, M12 threaded barrel

Э: DC 3-wire

1: NPN нормально открытый (НЕТ)

Основные электрические характеристики

Определение проводки (3-wire Cable)

Коричневый: DC + (Мощность Позитив)

Синий: 0 В (Мощность отрицательная)

Черный: NPN signal output

Операция: When metal approaches within 5 mm, black wire conducts to blue wire; yellow LED indicator illuminates.

Примечания по установке

1. Non-shielded type, do NOT flush-mount into metal bore. Maintain metal clearance around sensing face; flush mounting will drastically reduce sensing distance.
2. Supplied with 2 pcs M12 lock nuts.
3. Actual sensing distance decreases for non-ferrous targets (медь, алюминий).

Cross-Reference Part Numbers in Same Series

E2E-X5ME1: NPN нормально открытый (original part)

E2E-X5ME2: NPN Normally Closed (Северная Каролина)

E2E-X5MF1: PNP Normally Open (НЕТ)

E2E-X5MF2: PNP нормально закрытый (Северная Каролина)

E2E-X5ME1-M1: M12 connector version (replaces cable-type)

Discontinued Model Replacement Recommendations

1. Genuine Omron Upgrade: E2E-NEXT series E2E-X5C112-M1TJ, M12 cable type, 5 mm non-shielded, NPN-NO, improved performance and full compatibility.
2. Внутренний эквивалент: М12, non-shielded 5 mm, NPN-NO, DC10-30 V, IP67 proximity sensor.

Распространенное устранение неполадок

1. LED does not light: Verify brown/blue power polarity and 10-30 VDC supply.
2. LED lights but no output: Incorrect load wiring. For NPN output, connect load between brown positive and black signal wire.
3. Shortened sensing distance: Sensor is sunken into metal, or target material is non-ferrous.

Replacement Options for E2E-X5ME1

Original Part: E2E-X5ME1, М12, неэкранированный (Sn=5 mm), DC 3-wire, NPN Normally Open NO, 2 m cable, IP67. Legacy E2E series discontinued.

Critical requirements: M12 barrel, non-flush mount, 5 mm sensing distance, NPN-NO, DC10-30 V, 3-wire 2-meter cable (Brown-Blue-Black).

1. Genuine Omron Official Replacements (E2E-NEXT series — Preferred)

Электропроводка: Brown = Power+, Blue = 0 V, Black = NPN output. LED operation identical to E2E-X5ME1.

2. Omron Legacy Stock / Подержанный (Only for emergency maintenance; not for new projects)

E2E-X5ME1-Z: Revised suffix variant, identical specifications, old stock only.

Примечание: High counterfeit risk. Do not specify for new equipment.

3. Other Imported Brand Drop-in Equivalents (1:1 parameter match)
4. Schneider XS2-M12MA230

M12 non-shielded 5 mm, NPN-NO, DC12-24 V, 2 m cable, IP67; compatible mounting dimensions and wiring.

2. Pepperl+Fuchs NBB5-12GM50-E0

М12, Sn=5 mm, NPN-NO, 3-wire 2 m cable; superior noise immunity, ideal for high-frequency applications.

4. Внутренние альтернативы (Оптимизация затрат, retrofitting / запчасти)

Характеристики: М12, non-shielded 5 mm, NPN-NO, DC10-30 V, 2 m output, IP67

1. LJ12A3-5-Z/BX: General-purpose domestic sensor, 5 mm non-shielded, NPN-NO, экономически эффективный.
2. GC-E2E-X5ME1: Form-fit copy of Omron unit, identical housing dimensions for direct field replacement.

⚠️ Replacement Precautions

1. Non-shielded sensor must not be flush-mounted into metal bore. Maintain same installation clearance as original, otherwise sensing performance degrades.
2. NPN wiring remains unchanged: connect load between brown positive supply and black signal output.
3. If PLC input is PNP type, above models cannot be used; select PNP-NO variant instead.
4. E2E-NEXT delivers improved response frequency and metal interference resistance compared to legacy E2E-X5ME1, drop-in compatible for most scenarios.

Complete Technical Datasheet — Omron E2E-X5ME1

Статус: Устаревший / Снято с производства. Legacy E2E inductive proximity sensor, M12 non-shield, 3-wire NPN-NO, 2 m cable.

Разбивка модели: E2E(ряд)-X5M(non-shielded Sn=5 mm M12)-Э(NPN DC 3-wire)-1(Нормально открытый НЕТ)

🔌 Electrical Ratings

📐 Mechanical Specifications

🌍 Environmental Ratings

🧵 3-wire Cable Pinout

Коричневый: DC Power Positive (+)

Синий: DC Power Negative (0 В)

Черный: NPN Signal Output

NPN wiring rule: Connect load between brown positive supply and black signal wire. Do not connect black wire to 0 V.

Операция: When metal enters sensing zone, black-blue path conducts and LED turns on; opens when target moves away.

📎 Sensing-Distance Derating by Target Material

Nominal 5 mm applies only to ferrous steel

Iron / Cold-rolled steel: 5 мм (рейтинг)

SUS304 Stainless steel: приблизительно. 3.5-4 мм

Алюминий: приблизительно. 2-2.5 мм

Латунь / Медь: приблизительно. 1.5-2 мм

⚠️ Critical Installation Instructions

1. Never flush-mount non-shielded sensor into metal housing. Maintain metal clearance around sensing face; flush mounting causes reduced range or total failure.
2. Side-by-side sensor installation: keep metal separation ≥15 mm between units to prevent mutual interference & ложное срабатывание.
3. Sensing distance reduces if target size is smaller than standard test piece.

📌 Related Variants

E2E-X5ME1-Z: Revised version, identical specs, old stock

E2E-X5ME1-M1: M12 connector-type, no cable, requires mating cordset

✅ Official Direct Replacement

E2E-X5C112-Z 2M (E2E-NEXT series). M12 non-shielded, 5 мм, NPN-NO, 2 m cable. Pin-to-pin & mounting compatible, enhanced noise performance. Preferred for new projects.