Пепперл+Фукс 183811 Фотоэлектрический датчик - Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер

Вичат: +86-13184948252 WhatsApp: 0086-13811255435 Электронная почта: kent@bestcontactor.com

О Контакт |

 Пепперл+Фукс 183811 Фотоэлектрический датчик - Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер

Датчик/

Пепперл+Фукс 183811 Фотоэлектрический датчик

(Модель: RL31-54/73c/136) Тип: Retroreflective photoelectric sensor with polarization filter Polarization filter design enables detection of transparent films & PET bottles and suppresses false triggering from highly reflective surfaces. Core Specifications Part No.: 183811, Модель: RL31-54/73c/136 Sensing range: 20 ~ 9000 мм (9 м), Макс. предел 12 м; matched reflector: C110-2 Light source: Modulated red light ...

  • Подробная информация о продукте

(Модель: RL31-54/73c/136)

Тип: Retroreflective фотоэлектрический датчик with polarization filter

Polarization filter design enables detection of transparent films & PET bottles and suppresses false triggering from highly reflective surfaces.

Основные характеристики

Номер детали.: 183811, Модель: RL31-54/73c/136

Sensing range: 20 ~ 9000 мм (9 м), Макс. предел 12 м; matched reflector: C110-2

Источник света: Modulated red light (630 нм) with polarization filter

Напряжение питания: 10 … 30 В Вашингтоне, no-load current ≤20 mA

Выход: 2 двухтактный (4-в-1) результаты, dark-on (Q2), Макс. нагрузка 100 мА; короткое замыкание & защита от обратной полярности

Время ответа: ≤1 ms, Макс. частота переключения 500 Гц

Класс защиты: IP67

Разъем: 4-контактный разъем M12

Размеры: 18 (Вт) × 62 (ЧАС) × 35 (Д) мм, пластиковый корпус, вес нетто 24 г

Температура окружающей среды: -30 ~ +55 ℃

MTTFd: 920 годы

📌 M12 Pin Assignment (ЭН60947-5-2)

1 БН (Коричневый): +UB Power Positive

2 WH (Белый): Q1 (Light-on Output)

3 ЭТОТ (Синий): 0В ЗЕМЛЯ

4 БК (Черный): Q2 (Dark-on Output)

💡 LED Indicators

Зеленый светодиод: Power supply ON

Желтый светодиод: Signal status (steady / мигающий / off indicates signal reserve)

📋 Application & Функции

Ideal for transparent object detection (plastic films, стеклянные бутылки, упаковка)

Standard RL31 compact housing, widely used on conveyor & упаковочное оборудование

Fixed-parameter version without sensitivity adjustment potentiometer

Application Cases for Пепперл+Фукс 183811 (RL31-54/73c/136)

Core precondition: Polarized retroreflective, 9 m max range, IP67, dual push-pull output, no adjustment knob, suppress specular reflection & reliably detect transparent objects; factory reflector C110-2 required

Случай 1: Beverage PET Bottle Filling Line (Классическое приложение)

Рабочее состояние: High-speed bottle conveyor with highly reflective empty/full transparent PET bottles; standard retroreflective sensors suffer frequent false triggering

Монтаж: Sensor on one side, C110-2 reflector opposite; beam crosses the bottle path, distance 3~6 m

Функции: Bottle presence detection, missing bottle alarm, filling machine interlock & подсчет. Polarization filter eliminates specular reflection from bottle bodies; beam interruption reliably detects transparent PET without missed detection.

Преимущества: No on-site calibration required; M12 quick connector; IP67 resistant to splashing water.

Случай 2: Horizontal Form-Fill-Seal Packaging Machine (Transparent Packaging Film Detection)

Рабочее состояние: High-speed BOPP transparent heat-seal film with unstable reflection causing flickering & signal loss

Монтаж: Beam spans the machine frame; film runs between sensor and reflector, distance 2~5 m

Функции: Film break protection & material presence detection to prevent empty sealing & knife damage. Polarization suppresses mirror reflection from thin transparent films.

Примечание: Signal margin may be insufficient for ultra-thin films (<10 мкм); better suited for thicker frosted transparent materials.

Случай 3: Логистическая сортировка & Roller Conveyor Long-distance Material Detection

Рабочее состояние: Long belt/roller lines with cartons & pallets, sensing distance up to 7~9 m, пыльная среда

Монтаж: Sensor at one end of the passage, reflector fixed on the opposite frame

Функции: Parcel arrival trigger for barcode scanning, sorting cylinder actuation, обнаружение замятия & tail material monitoring. Only the sensor side requires power (reflector is passive), saving wiring compared to through-beam sensors. Dual push-pull outputs provide redundant light-on/dark-on signals for PLC logic.

Случай 4: Ежедневная химия & Pharmaceutical Packaging Line (Glass Vials & Ampoules)

Рабочее состояние: Strong specular reflection from glass bottles causing frequent false signals with ordinary photoelectric sensors

Функции: Missing bottle detection, ejector trigger, part confirmation at sealing stations. Широкий температурный диапазон (-30~+55℃) fits cold-chain pharmaceutical packaging lines.

Случай 5: Industrial Rapid Roll-Up Door Safety Protection

Рабочее состояние: 5~8 m wide door openings on factory overhead doors; prevent door closing from trapping people & vehicles

Монтаж: Sensor on one door post, C110-2 reflector on the opposite post; beam runs horizontally across the doorway

Функции: Схема безопасности; beam interruption stops door closing and triggers reverse opening. IP67 dust & water resistance suits outdoor & car wash humid environments; polarization avoids false triggering from ground water reflection.

Случай 6: Автоматизированный склад & Stacker Crane Aisle Protection

Рабочее состояние: 4~8 m wide storage aisles with metal rack reflections & тяжелая пыль

Функции: Aisle intrusion detection, over-height cargo inspection, pallet position confirmation. 9 m long range covers most aisle widths; polarization filters out metal rack reflections to reduce unstable signals.

Случай 7: Automotive Component Conveyor (Glossy Painted Workpiece Anti-False Trigger)

Рабочее состояние: Mirror-finish painted bumpers & sheet metal parts cause permanent false triggering on standard retroreflective sensors

Функции: Part presence & station position confirmation. Polarized lens blocks specular reflected light; only actual beam interruption generates a valid output signal, ideal for glossy workpiece inspection.

📌 On-site Operation Notes (Limitations of this fixed model)

  1. No sensitivity potentiometer: Signal margin must be verified during selection; not suitable for materials with highly variable light transmittance.
  2. Only use polarized reflector C110-2: Ordinary reflective stickers will render the polarized beam ineffective with no return signal.
  3. Not recommended for sustained heavy water mist & oil mist that continuously attenuates the light beam.
  4. Q1 = light-on, Q2 = dark-on, flexible for different PLC logic.

Нерекомендуемые приложения

Severe fluttering & wrinkling of ultra-thin transparent films (insufficient signal reserve)

Frequent switching between different transparent materials (no adjustable sensitivity)

Sensing distance exceeding 9 м

Installation Guidelines for Pepperl+Fuchs 183811 (RL31-54/73c/136)

Critical preconditions: Polarized retroreflective, no adjustment knob, mandatory use of C110-2 polarized reflector — these three points are the most common installation pitfalls.

  1. Optical Beam & Reflector (Высший приоритет)
  2. Reflector rule: C110-2 only. Standard reflective tape/reflectors cannot be used; polarized light path will fail with no reflected signal. The reflector must be perpendicular to the sensor; do not rotate the reflector 90° (crossed polarization = zero signal).
  3. Rated range: 20 mm ~ 9000 mm for reliable operation; do not run continuously at the 12 m absolute limit. Avoid installation below 20 мм; near-range polarized beams tend to malfunction.
  4. Beam divergence angle: 3°; light spot expands to ~200 mm at 6 м. Ensure the entire light spot falls fully onto the reflector surface.
  5. Keep the beam completely clear; скобки, cables and frame edges must not intrude into the optical path. Transparent targets (ПЭТ-бутылки, фильм) must fully block the beam, not just partially cut across it.
  6. Avoid strong reflective backgrounds (polished stainless steel, glossy paint) directly opposite the sensor; even with polarization, close large mirror surfaces may still cause false triggering.
  7. Do not arbitrarily rotate the sensor or reflector; misalignment of polarization axis results in total signal loss.
  8. Механический монтаж, Brackets & Охрана окружающей среды
  9. Housing size: 18×62×35 mm. Recommended original brackets: OMH-RL31-01/02/03/05; fasten with M4 screws with moderate torque to prevent cracking the PMMA optical window.
  10. Optical window material: ПММА. Do not scratch with hard objects or clean with strong solvents (ацетон, тоньше, long-term alcohol soaking). Only use dry lint-free cloth or clean water for cleaning.
  11. IP67 rating: Tighten the M12 connector fully with intact sealing rings. Mount the connector downward or sideways to prevent water pooling; this sensor is not submersible and cannot withstand continuous immersion.
  12. Температура окружающей среды: -30℃ ~ +55 ℃. Keep away from heat sources such as motors, heating rollers and hot air outlets. Fit sun & rain shields for outdoor installation.
  13. Ambient light resistance: Макс. 50,000 Lux. Prevent direct sunlight or high-power strobe lights shining onto the optical window; strong light reduces signal reserve and causes yellow LED flickering.
  14. For vibration-prone conveyors & shakers, use rigid mounting plus vibration-damping gaskets to avoid beam drift.
  15. Электрическая проводка & Источник питания (M12 4-pin A-coded)

Назначение выводов (ЭН60947-5-2):

1 БН: DC 10–30V Positive

2 WH: Q1 Light-on Output

3 ЭТОТ: 0В ЗЕМЛЯ

4 БК: Q2 Dark-on Output

  1. Источник питания: 10–30V DC SELV/PELV safety voltage. Built-in reverse polarity & защита от короткого замыкания; add a small external fuse as extra protection.
  2. Push-pull 4-in-1 outputs with max. 100 mA load. Do not drive solenoid valves directly; use an intermediate relay or PLC input module.
  3. Use PUR oil-resistant M12 cables (V1-G/V1-W series). Route cables separately from power lines to minimize EMI; avoid repeated bending right at the connector root.
  4. Do not run alongside inverter & Кабели питания сервоприводов в одном коробе; high-frequency interference will cause signal fluctuation.
  5. Выравнивание & LED Troubleshooting (No Adjustment Potentiometer!)

No potentiometer or setting buttons; sensitivity cannot be adjusted. Only mechanical alignment can secure sufficient signal reserve, which must be confirmed at the selection stage.

Green LED steady ON: Power normal

Yellow LED steady ON: Adequate signal (≥2× switching reserve, ideal operating state)

Yellow LED flashing: Marginal signal (1~2× switching point). Prone to instability from dust, влага и вибрация. Realign the beam or shorten the distance before commissioning.

Yellow LED OFF: No reflected signal; misaligned beam, wrong reflector or blocked light path.

Commissioning standard: Lock the bracket only after the yellow LED stays steadily ON; never accept flashing status for production.

  1. Anti-Crosstalk for Multiple Sensors Installed Side-by-Side

Multiple RL31 sensors with intersecting beams or facing the same reflector will suffer mutual optical interference.

Maintain sufficient spacing between sensors

Stagger beam heights to avoid overlapping optical paths

Install light baffles between optical windows if beam separation is impossible.

  1. Key Tips for Transparent Object Detection
  2. ПЭТ-бутылки & transparent film must fully block the beam. For films thinner than 10 мкм, shorten the sensing distance to increase signal reserve.
  3. In dusty, misty & маслянистая среда, beam attenuation accelerates; reserve extra signal margin and regularly clean windows and reflectors.
  4. Avoid continuous frost & heavy oil sludge buildup on the optical surface, which will steadily weaken the return signal.
  5. Высокоскоростные упаковочные линии: Response time ≤1 ms and 500 Hz switching frequency meet most high-speed applications. Calculate the beam blocking duration to prevent missed detection from ultra-short target passage.
  6. Обслуживание & Запрещенные операции

Do not replace C110-2 with non-polarized reflectors

Do not grind or scratch the optical window

Do not clean lenses with strong solvents

Do not operate continuously beyond the 9 m rated range

Do not rotate sensor/reflector to cross the polarization axis

Регулярный осмотр: Clean optical surfaces & reflectors, check bracket looseness, reconfirm yellow LED status.

  1. Safety Reminder

This sensor is not a PLd/PLe safety light curtain and cannot be directly wired into safety stop circuits despite high MTTFd. When used for roll-up door safety protection, the safety circuit architecture must be evaluated separately.

Pepperl+Fuchs Full List | Polarized Retroreflective Photoelectric Sensors (Модель + Номер детали.)

Примечание: All listed models are Polarized Retroreflective type, requiring dedicated polarized reflectors. Five series: РЛ31 / РЛ28&RL29 / ML100 / OBR / OBG (clear object dedicated). The model you currently use (183811) is marked.

Matched polarized reflectors: C110-2, REF-H50, REF-H60, REF-H85-2 (not interchangeable between series).

  1. RL31 Series (9 диапазон м, no adjustment knob, dual push-pull 4-in-1; same series as 183811, mainstream for PET packaging lines)
Номер детали.Полная модельДиапазон чувствительностиВыход / СвязьПримечания
183811RL31-54/73c/13620…9000 mmDual push-pull, М12 4-контактный, dark-on Q2Ваша текущая модель, no potentiometerfiles.pepp…
183809RL31-54/25/73c/13620…9000 mmDual push-pull, М12 4-контактный, light-on Q1Идентичный корпус, light-on version
183810RL31-54/115/13620…9000 mmDual push-pull, 2 м фиксированный кабель, dark-onFixed cable version
183808RL31-54/25/115/13620…9000 mmDual push-pull, 2 м фиксированный кабель, light-onFixed cable light-on variant
189745RLK31-54/25/31/11520…9000 mmAC/DC универсальный, однополюсное реле, 2 м кабельRelay output for roll-up doors
189746RLK31-54/25/31/115 SET20…9000 mmIncludes bracket OMH-RL31-01 + C110-2 reflectorPre-assembled kit
  1. РЛ28 / RL29 Series (Polarization + foreground suppression; eliminates false triggering from nearby debris; 5~9 m, регулируемая чувствительность)
Номер детали.Полная модельДиапазон чувствительностиВыход / СвязьПримечания
128140RL28-55/49/82b/1050.05…7000 mmPush-pull, М12 5-контактный, регулируемая чувствительностьPolarization + foreground suppression
128141RL28-55-V/49/82b/1050.05…7000 mmPush-pull, М12 5-контактный, with time delayTime-delay variant
184045RL29-55-V/73c/1360.05…9000 mmDual push-pull M12 4-pin, foreground suppression9 m long range with near-object suppression
184044RL29-55-V/25/73c/1360.05…9000 mmDual push-pull M12 4-pin, light-onLight-on version
  1. ML100 Miniature Polarized Retroreflective (3 м / 5 м, compact square housing, adjustable knob; mass model for general conveyors)

All ML100 retroreflective models come with built-in polarization filters for glossy packaging & aluminum foil detection.

Номер детали.Полная модельДиапазон чувствительностиВыход / СвязьПримечания
425910OBR6000-R103-2EP-IO-V310.02…6000 mmIO-Link, М12, dual push-pullIP69K washdown resistant, wide temperaturePepperl+Fu…
425911OBR6000-R103-2EP-IO-0,3M-V310.02…6000 mmIO-Link, 0.3 m short cableShort pigtail version
424050OBR1000-R3-E0-P0.02…1000 mmNPN dark-on, 2 м кабель, micro size1 m short-range miniature sensor
  1. OBR New Generation Miniature Polarized Retroreflective (IP69К, IO-Link, wide temperature -40~+60℃; еда & линии промывки)
Номер детали.Полная модельДиапазон чувствительностиВыход / СвязьПримечания
425910OBR6000-R103-2EP-IO-V310.02…6000 mmIO-Link, М12, dual push-pullIP69K washdown resistant, wide temperaturePepperl+Fu…
425911OBR6000-R103-2EP-IO-0,3M-V310.02…6000 mmIO-Link, 0.3 m short cableShort pigtail version
424050OBR1000-R3-E0-P0.02…1000 mmNPN dark-on, 2 м кабель, micro size1 m short-range miniature sensor
  1. OBG Clear-Object Dedicated Polarized Retroreflective (For PET, стекло & thin films; dual-mode transparent detection)

Difference from standard polarized sensors: switchable transparent detection mode, optimized for ultra-thin films & стеклянные бутылки.

| 426200 | OBG5000-R101-2P1-IO-V31 | 0.02…5000 mm | IO-Link, М12 | IP69К, dedicated transparent object detection |

| 426201 | OBG5000-R101-PPF-IO-V31 | 0.02…5000 mm | IO-Link, PPF high-performance version | High-sensitivity transparent detection |

| 426210 | OBG8000-R200-2EP-IO-V15 | 0.02…8000 mm | IO-Link, М12 | 8 m long-range transparent detection |

Руководство по быстрому выбору (Replacement Options for 183811)

  1. Прямая замена (9 м, no adjustment, Разъем М12) → RL31 series (183809 / 183810)
  2. Регулируемая чувствительность, 9 m polarized range + near-object false trigger suppression → RL29 series
  3. Ограниченное пространство для установки, ≤5 m range, budget-friendly with adjustable knob → ML100 series
  4. Food washdown environment, IP69К & IO-Link data transmission → OBR6000
  5. Mass detection of ultra-thin films & glass bottles to avoid missed detection → OBG clear-object series

General Important Notes for Polarized Models

Polarized retroreflective sensors must use dedicated polarized reflectors; ordinary reflective tape will fail with no signal.

Polarized ≠ clear-object sensor: RL31 polarization works for PET bottles, but select OBG for films thinner than 10 мкм.

This list only includes models with built-in polarization filters; standard non-polarized retroreflective sensors are excluded.

Предыдущий:

Оставить ответ

Оставить сообщение