Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер
Product Profile: 1606-XLE Essential series, single-phase DIN-rail industrial switch-mode power supply, 240W/24VDC. Active production program, manufactured in Czech Republic, 1-year warranty.
Декодирование модели
1606-XLE 240 Э
1606: Power supply series
XLE: Essential economy-grade base power supply
240: Rated power 240 W
Э: 24-28 V DC adjustable output
Основные электрические характеристики
| Элемент | Параметр |
| Входное напряжение | AC 100‑240 V single‑phase (90‑264 V wide range); also supports DC 110‑150 V DC input |
| Входная частота | 50‑60 Hz |
| Выход | DC 24 V, adjustable range 24‑28 V; factory preset 24.1 V |
| Номинальная мощность | 240 Вт / 10 А (@≤60 °C); 120% short‑term power capacity (12 А) within 45 °C for dynamic boost |
| Derating Characteristics | Linear derating from 45 °C to 70 °C; full‑rate 10 A not available above 60 °C |
| Эффективность | Typical 95.2% |
| Коэффициент мощности | 0.97 |
| Hold‑up Time | 46 ms @ 120 VAC |
| Пусковой ток | Built‑in inrush current suppression |
| Защита | Перенапряжение, перегрузка, короткое замыкание, over‑temperature; auto‑recovery upon fault clearance |
| Сигнал | DC‑OK relay dry contact (13-14), green status LED indicator |
| Parallel Operation | Supports parallel connection for capacity expansion / redundancy. Parallel mode must be enabled; 1606‑XLPAR current‑sharing module is recommended |
Механический & Характеристики установки
Монтаж: 35 мм стандартная DIN-рейка, natural convection cooling (fan-less)
Размеры: W60 mm × H124 mm × D117 mm
Масса: Приблизительно. 930 г
Прекращение действия: Винтовые клеммы
Класс защиты: IP20 (for cabinet-mount use only)
Рабочая температура: -25 °C ~ +70 °C
Installation Clearance: Top ≥40 mm, bottom ≥20 mm, left/right ≥5 mm
Terminal Description
- Input side: л, Н, PE AC input
- Output side: +, 24 VDC output
- DC-OK: 13-14 relay contacts; closed under normal output, connectable to ПЛК alarm input
Series Suffix Variant Comparison
| Модель | Разница |
| 1606‑XLE240E | Standard screw terminals, глобальная версия |
| 1606‑XLE240EC | Push‑in spring terminals |
| 1606‑XLE240EL | Low‑range variant |
| 1606‑XLE240EH | High‑altitude variant |
Примечание: 1606-XLE240EN is 3-phase 380 V input version, не путай.
Альтернативный выбор
Rockwell Original Upgrade
- 1606-XLS240E: XLS high-performance series, 50% short-term overload capability, higher MTBF, identical power rating and footprint, drop-in replacement with enhanced performance.
3rd-Party Compatible (24 V/10 A/240 W single-phase DIN-rail power supply)
Феникс Контакт: QUINT-PS-1AC-24DC-10
Шнайдер Электрик: ABL2RED24050 (240 Вт)
Сименс: 6EP1334-2BA10
Напоминание о замене: Verify DC-OK alarm contact, parallel-operation capability and temperature derating curve.
Типичные сценарии применения
Power supply for CompactLogix PLC, distributed I/O, датчики, valve islands and HMI; control cabinets for production lines, packaging machinery and material-handling equipment; two-unit parallel connection for 24 VDC redundant power supply.
Рекомендации по устранению неполадок
- DC-OK LED off: Check input voltage and internal input fuse; короткое замыкание на выходе / перегрузка; over-temperature protection triggered by excessive ambient temperature.
- Low output voltage: Чрезмерная нагрузка, thermal derating; potentiometer for output adjustment mis-adjusted.
- Parallel operation: Parallel mode switch must be enabled; direct parallel connection without configuration is prohibited.
Customs Reference
Commodity Description: Industrial switch-mode power supply, AC-to-DC conversion, 240 Вт
HS Code Reference: 8504409990 (Другие статические преобразователи. Final classification subject to local customs authority.)
Роквелл 1606-XLE240E Application Scenarios
Product Profile: Economical single-phase DIN-rail 24 V/10 A/240 W industrial switch-mode power supply. Optimized for Rockwell PLC control systems and stand-alone machine cabinets. Функции 120% short-term overload, DC-OK alarm relay, supports parallel capacity expansion and redundancy. IP20 cabinet-mount design. Not suitable for hazardous explosive areas or direct outdoor installation.
- Control-System Power Supply (Primary Use)
- CompactLogix System Control Cabinets
Power supply for 1769-series PLC controllers and local I/O modules; feeds HMI operator panels, safety relays and standard digital/analog I/O modules. Single unit suffices for standard 24 V bus power of small-to-medium PLC systems with I/O and sensor peripherals.
Примечание: Not intended for ControlLogix backplane power; used exclusively for external 24 V field circuits.
- Distributed I/O Systems
24 V field power for Point-IO and FLEX-IO distributed modules; power supply for proximity sensors, фотоэлектрические датчики, encoders and solenoid coils of valve islands.
- Equipment Alarm & Мониторинг
The DC-OK dry contact connects to PLC digital input, triggering system alarm and fault logging upon power-supply failure or output dropout.
- OEM Machinery Industry Applications
- Упаковочное оборудование: Упаковочные машины, этикетировщики, герметики для корпусов. Supplies PLC, touch-screen HMI, датчики, pneumatic valve islands and indicator lamps; preferred single-phase power solution for stand-alone machines.
- Material-Handling Equipment: Ленточные конвейеры, сортировочные системы. 24 V control power for distributed I/O, световые завесы безопасности, photoelectric detectors and safety relays.
- Assembly Workstations: Automated assembly stations, robot peripheral cabinets. Power for workstation sensors, solenoid valves and push-button indicators.
- Process Skid Units: Small-scale process skid cabinets and standalone unit equipment. Power for transmitter loops and small controllers under single-phase input conditions.
- Модернизация, Замена & Redundancy Applications
- Legacy Cabinet Retrofit & Обновление
Drop-in DIN-rail replacement for obsolete 1606-XL series power supplies; cabinet modernization for existing Rockwell equipment.
- Parallel Redundant Power Operation
Two 1606-XLE240E units configured for parallel mode with 1606-XLPAR current-sharing module for load balancing. Continuous output maintained upon single-unit failure, for critical control loops where downtime is costly. Not for safety emergency-stop circuit primary power.
- Общее промышленное применение
Stand-alone factory control cabinets, production-line single-unit stations, испытательные приспособления
Plant-wide monitoring cabinets: Power for PLC acquisition modules, instruments and sensors
Food-processing, light-industry and automotive-component manufacturing (non-hazardous general-purpose workshops only)
✘ Non-Recommended Applications
- Main power for high-power equipment with 3-phase mains input. Select 1606-XLE240EN for 3-phase 380 V input requirements.
- Hazardous explosive locations (no Class 1 Div 2 certification; choose XLS series instead).
- Direct outdoor exposure; must be installed inside protective enclosures.
- High-power servo power circuits. Restricted to 24 V logic-level control circuits, not for power-drive loads.
Руководство по быстрому выбору
✅ Suitable: Total 24 V load ≤10 A; short-term 12 A permissible at 45 °C ambient; single-phase AC 100-240 V supply; Rockwell PLC ecosystem; power-supply fault alarm required; cost-effective genuine OEM solution.
❌ Not Suitable: Continuous load exceeding 10 A; long-term full-load operation at high cabinet temperature; hazardous-area installation; 3-phase incoming mains.
