Контактор Шнайдер LC1D256BL

Пояснение кода модели

2. Основные технические характеристики

3. Полный список моделей (LC1D Series, 25A Range)

4. Кросс-брендовый & Old/New Model Replacement List

4.1 In-brand Replacement (Шнайдер)

4.2 Cross-brand Replacement

5. Среда применения & Отраслевые случаи

5.1 Рекомендуемые приложения

Промышленная автоматизация: Control of three-phase asynchronous motors (фанаты, водяные насосы, компрессоры, конвейеры)

Системы отопления, вентиляции и кондиционирования: Air conditioning compressors and ventilation systems

Building Electrical: Автоматизация зданий, lighting systems and fire-fighting equipment

Энергетическая промышленность: Power generation equipment, power distribution systems and renewable energy facilities

Очистка воды: Water pump control and wastewater treatment equipment

Морской & Railway: Transportation industry requiring special certifications (LC1D series advantages)

5.2 Нерекомендуемые приложения

High-frequency switching: Над 1200 операций в час (Select LC1Q / LC1R series instead)

High altitude: Elevation over 2000m (Derate load or use special models)

Corrosive environments: Direct exposure to acid, alkali and salt mist (Additional protection required)

Explosion-proof areas: Special explosion-proof certified models are mandatory

5.3 Типичные случаи применения

1. Automobile Manufacturing Plant

Used for motor control of stamping production lines. После замены, breaking time is reduced by 30%, failure rate drops by 50%, maintenance time is shortened from 2 часов до 30 минуты, and annual maintenance cost is cut by about 200,000 юаней.

2. Еда & Производство напитков

Applied to three-phase motors of filling lines. Thanks to 2.4W low power consumption, each contactor saves approximately 18 kWh per year under 24-hour continuous operation. A factory with 100 units saves 1,800 kWh annually.

3. Дата-центр

Controls air conditioning compressors and ventilation fans. The 24VDC low-power coil ensures stable operation under UPS power supply, reduces battery load and extends backup duration.

6. Рекомендации по выбору & Краткий справочник правил

Советы по быстрому выбору

This is a 3-pole 25A contactor with 24VDC low-power coil and ring terminals. Equipped with 1NO+1NC auxiliary contacts, it features energy efficiency, high reliability and long service life, ideal for motors, water pumps and compressors.

Краткий справочник правил

1. Текущее соответствие: 25A under AC-3 for 11kW three-phase motors; 40A capacity for resistive loads under AC-1.
2. Coil Identification: Suffix BL = 24VDC low power; B7 = 24VAC low power; BD = 24VDC standard power.
3. Вспомогательные контакты: Standard 1NO+1NC. Models with suffix 01 или 10 for alternative contact configurations.
4. Установка: Стандартный монтаж на DIN-рейку 35 мм.; ring terminals ensure reliable connection.
5. Энергосбережение: Low-power coil (≤2.4W) saves 70% energy compared with standard coil (приблизительно. 8Вт), perfect for long-term operation.
6. Распространенные неисправности & Поиск неисправностей

8. Key Ordering Information

Стандартная модель: LC1D256BL

Альтернативные модели: LC1D25BD (standard power version), LC1D256B7 (24VAC low-power version)

Совместимые аксессуары:

Auxiliary contact blocks: серия ЛАДН (например. LADN20C: 2НЕТ; LADN02C: 2Северная Каролина)

Overload relays: серия ЛРД (например. LRD08C: 6-10А, matches 25A contactor)

Mounting base: Optional separate base

Application Scenarios for LC1D256BL

Core features: 3-полюс 25А, 24VDC low-power coil, длительный срок службы, standard DIN rail mounting, 1НО+1НЗ вспомогательные контакты, strong anti-interference performance.

1. Рекомендуемые сценарии применения (Основные приложения)

Featured with 24VDC low-power DC coil, this model perfectly matches standard industrial DC control circuits. Its 25A rating is suitable for three-phase motors up to 11kW and resistive loads up to 40A, serving as a mainstream component for automatic control cabinets.

1.1 Оборудование промышленной автоматизации (Основное приложение)

Применимое оборудование

PLC/DCS control cabinets, небольшие станки, manipulator auxiliary mechanisms, inverter-driven fans, small drive motors, test and inspection equipment.

Преимущества

24VDC is the mainstream control voltage for industrial control systems, no extra power converter required.

DC coil provides strong EMC performance, avoiding misoperation caused by inverters and servos.

Низкая мощность (≤2.4W) generates little heat during continuous power-on, подходит для 24/7 standby equipment.

1.2 ОВК & Air Ventilation Systems

Применимое оборудование

Крытый & outdoor unit fans of central air conditioners, конденсатные насосы, вентиляторы градирни, fresh air handling units, damper drive motors, machine room exhaust fans.

Преимущества

HVAC rooms widely adopt 24VDC automatic control circuits for high compatibility.

Low power design reduces energy consumption and cabinet temperature for year-round continuous operation.

Диапазон рабочих температур: -25°С ~ +70°С, adapts to drastic temperature changes in machine rooms.

1.3 Building Electrical & Fire Emergency Systems

Применимое оборудование

Domestic water pumps, basement exhaust fans, fire smoke exhaust fans, fire roller shutter motors, centralized emergency lighting circuits (резистивная нагрузка).

Преимущества

Standard 24VDC for fire emergency circuits, directly powered by UPS/emergency batteries for normal operation during power failure.

Built-in 1NO+1NC auxiliary contacts transmit operation/fault signals to fire alarm hosts and building monitoring systems.

40A load capacity under AC-1 for multi-circuit lighting control.

1.4 Water Treatment Industry (Sewage / Purified Water / Circulating Water)

Применимое оборудование

Circulating water pumps, dosing metering pumps, aeration fans, small agitator motors, ventilation equipment for water treatment workshops.

Преимущества

Almost all automatic control systems for water treatment use 24VDC.

IP20 protection rating adapts to slightly humid indoor machine rooms.

Satisfactory electrical endurance for frequent start-stop operation with low failure rate.

1.5 Новая Энергия, PV & Energy Storage Cabinets

Применимое оборудование

Cooling fans for PV boxes, temperature control pumps for battery compartments, ventilation motors of energy storage cabinets, small auxiliary inverter loads.

Преимущества

PV and energy storage systems are DC-powered inherently; no inverter needed for 24VDC coil.

Ultra-low coil power avoids extra consumption of backup battery power and extends backup time.

No AC humming for DC coil, ideal for quiet energy storage rooms.

1.6 Логистика, Складирование & Conveyor Lines

Применимое оборудование

Ленточные конвейеры, roller sorting lines, small elevators, warehouse ventilation fans.

Преимущества

Mechanical and electrical endurance meets frequent regular start-stop for long-running production lines.

Auxiliary contacts realize interlock, chain control and sequence start to ensure safety logic of production lines.

1.7 Еда, Упаковка & Light Industrial Equipment

Применимое оборудование

Conveyors of packaging machines, auxiliary motors of filling lines, dehumidifiers and ventilation fans for workshops.

Преимущества

Suitable for clean indoor workshops without heavy corrosion; standard rail mounting facilitates standardized cabinet wiring.

Compact structure saves cabinet space, a standard OEM component for complete machines.

2. Не рекомендуется / Запрещенные сценарии (Риски & Альтернативы)

2.1 High-frequency Start-Stop (Над 1200 cycles per hour)

Риск: Excessive switching frequency causes rapid contact ablation, welding and shortened service life.

Альтернатива: Schneider LC1R / LC1R series high-frequency contactors.

2.2 Высота выше 2000м.

Риск: Thin air degrades arc extinction capability, leading to arcing and reduced insulation performance.

Рекомендация: Use special high-altitude contactors or derate the load by over 30%.

2.3 Severe Corrosion, Salt Spray & Тяжелая пыль (Chemical Plants, Coastal Open Areas, Mines)

Риск: IP20 rating cannot protect coil, terminals and contacts from acid, alkali, salt mist and dust erosion.

Требование: Bare installation is forbidden. Use sealed enclosures of IP54 or higher; select anti-corrosion models for chemical environments.

2.4 Direct Outdoor Installation without Protection

Риск: Rain, sunlight and condensation lead to coil short circuit and contact oxidation.

Mandatory Requirement: Install inside distribution cabinets or control enclosures with IP54 or higher protection.

2.5 High-power Pure DC Main Circuit Loads

Риск: Designed mainly for AC loads with poor DC breaking capacity; high DC loads easily cause contact welding.

Альтернатива: Schneider LP1D dedicated DC contactors.

2.6 220 В переменного тока / AC380V Control Circuits

Риск: 24VDC coil will burn out instantly if connected to AC power.

Alternative AC coil models:

24ВАК: LC1D256B7

220ВАК: LC1D25M7

380ВАК: LC1D25Q7

2.7 Control Three-phase 380V Motors over 11kW (АС-3)

Риск: Rated 25A under AC-3 corresponds to 11kW motor; overload results in overheating and burnt contacts.

Альтернатива: Upgrade to higher current models such as LC1D32 series.

3. Notes for Marginal Operating Conditions (Usable with Protection Measures)
4. Basements & Humid Machine Rooms

The product is applicable. Install dehumidifiers inside control cabinets to prevent condensation inside the contactor.

2. Ambient Temperature near Limits (-25°С / +70°С)

Derate the load by 10% and avoid long-term full-load operation.

3. Coil Wiring Length over 10m

Voltage drop occurs on 24VDC lines. Ensure terminal voltage of the contactor coil is no lower than 19.2V (minimum pull-in voltage).

4. Control Inductive Loads such as Motors

Equip with surge suppressors (Schneider LADRC series) to absorb back EMF and protect the coil.

4. Scenario Summary

✅ Preferred Applications: Indoor control cabinets, 24VDC control systems, three-phase motors up to 11kW, 24/7 continuous-operation equipment (Автоматизация, ОВК, Fire Protection, Очистка воды, Хранение энергии).

❌ Избегайте: High-frequency switching, high altitude, unprotected outdoor areas, heavily corrosive environments, high-power DC main circuits, AC control power supply.