Schneider LV434002 Ethernet-коммутаторный сервер

ULP system gateway server. Distinguished from the single-circuit-breaker interface LV434001; capable of stacking multiple ИФМ модули (LV434000). One server connects multiple IMU intelligent units, built-in RTC real-time clock, successor to the obsolete LV434011.

✅ Compatible circuit breaker ranges

ComPacT NSX 100~630

ComPacT NS630b～NS3200

MasterPact MTZ / НТ / NW

PowerPact H/J/L/P/R frame breakers

Предварительное условие: Circuit breaker equipped with MicroLogic trip unit + BSCM / BCM ULP communication module

✅ Communication interfaces

ETH: 2×RJ45, 10/100Мбит/с, Модбус TCP, daisy-chain support; built-in web server for web configuration, monitoring and remote control

ULP: 2×RJ45 ULP internal bus (ULP cable, Макс. 20 м), supports stacking IFM modules

Modbus-SL (RS485 serial Modbus, 9.6~38.4 kbps): manages up to 20 Modbus-SL slaves, supports up to 11 stacked IFMs

Протоколы: Модбус TCP, HTTP, FTP, SMTP email alarm, NTP, SNMP

✅ Электрика & mechanical specifications

Источник питания: 24 В постоянного тока (19.2~26.4 V), типичный 120 мА; powers itself and stacked IFMs, IFMs require no separate power supply

Монтаж: DIN rail snap-on mounting

Размеры: 72 × 105 × 71 мм

Масса: 187 г

Защита: Front panel IP4x, terminals IP2x

Рабочая температура: -25℃ ~ +70 ℃; storage temperature: -40℃ ~ +85 ℃

Сертификаты: CE, cULus, ФКС, ЕАС

✅ Core functions

1. Collect current, Напряжение, власть, энергия, охранная сигнализация, статус (закрыто/открыто, fault trip)
2. Дистанционное закрытие / opening (local lock switch on front panel can disable remote control authority)
3. Email alarm, event logging with RTC timestamp
4. Built-in web page for configuration, data viewing and debugging; Комиссия по энергетике EcoStruxure (Ecoreach) for firmware upgrade and commissioning
5. Test button and reset button (hold for 5s to restore DHCP factory default)

⚠️ The embedded switch does not support ring topology and STP, redundant ring network is not allowed

✅ Cross-series model comparison

✅ Common matching cables & spares

S434204 / S434303 / S434305: Insulated ULP cables for systems >480 ВАК

S434201 / S434202: Standard ULP cables, for ≤480 V only

1. Complete commissioning steps with EcoStruxure Power Commission (Ecoreach)

Препараты

1. Электропроводка: 24 источник питания постоянного тока; ULP cable connected to BSCM/BCM; Ethernet cable directly to PC or switch; unused ULP ports must be fitted with terminator plugs
2. Программное обеспечение: Free Шнайдер Ecoreach (EPC), version ≥2.14 recommended; PC IP in the same subnet as LV434002; firewall and proxy disabled
3. Factory setting: DHCP; IP can be scanned by software after power-on; hold reset button for 5s to restore DHCP factory setting

Шаг 1: Discover LV434002 gateway

1. Open Ecoreach → Create new project, выбирать [Switchboard]
2. Click [Launch Device Discovery], select Ethernet/IP as communication method
3. Scan the subnet, identify LV434002 (IFE Server) and add it to the project
4. Access IFE web page (browser input IP directly): configure static IP, NTP, SMTP alarm, Modbus-SL serial parameters (скорость передачи данных, паритет, slave quantity)

Шаг 2: Scan ULP-connected IFMs and breaker IMUs

1. On the IFE gateway topology page, бегать [Scan ULP Bus]
2. Automatically identify all LV434000 IFMs and NSX/MTZ breakers behind BSCM modules
3. Verify Modbus slave ID of each IFM; address conflict will be reported directly
4. Configure each IFM: modify Modbus-SL parameters, rename, enable/disable auto link

Шаг 3: Verify breaker parameters and communication

1. Open any breaker IMU: read real-time electrical values, status and alarms
2. Remote control test: confirm remote lock on breaker panel is unlocked → send open/close command via software; priority check lock position and ULP link light if failed
3. Регистрация событий: RTC synchronization (NTP server or manual time setting on web page) to ensure accurate timestamps
4. Firmware upgrade: select IFE / ИФМ / Micrologic trip unit for online upgrade (DO NOT power off during upgrade)

Шаг 4: Modbus-SL (RS485) конфигурация (необязательный)

1. Configure Modbus-SL on IFE web page or Ecoreach: 9600~38400 bps, паритет, стоп-биты
2. Макс. 20 Modbus-SL slaves, independent address space, separate from ULP IFM address planning
3. Termination resistor required at the end of Modbus-SL bus

Шаг 5: Export commissioning report

After telemetry, remote signalling and remote control pass, export switchboard communication test report from Ecoreach for BMS / SCADA integrators

III. Standalone WEB commissioning (on-site quick test without Ecoreach)

1. Enter IFE IP on browser within the same subnet to log into built-in Web Server
2. Меню: Сеть (ИП, DHCP), ULP Bus, Modbus SL, Time (NTP), Alert (SMTP email alarm), Diagnostic (link diagnosis, event log)
3. Diagnosis page displays ULP port signal quality, IFM online status and packet counters for fast fault location
4. Код ТН ВЭД & Declaration Notes

LV434002: Schneider Enerlin’X IFE Switchboard Server (Modbus TCP gateway, low-voltage power distribution intelligent communication module)

Recommended HS code: 85176290 (Other communication gateway equipment, industrial Modbus TCP gateway)

Alternative code adopted by some customs brokers: 90308990 (Electrical measuring accessory)

✅ Reminder: HS code subject to final confirmation by customs broker and local customs. I can check customs code for Uzbekistan separately. Элементы декларации: Бренд: Шнайдер, Модель: LV434002, Приложение: Communication acquisition gateway for low voltage circuit breakers, Источник питания: 24 В постоянного тока, Протокол: Модбус TCP

1. Alternative options
2. Original direct predecessor: LV434011 (Old IFE switchboard server, устаревший, нет часов реального времени, не рекомендуется для новых проектов, same hardware topology)
3. Series selection guide

LV434002: IFE Server ✅ Supports multiple IFMs, Modbus-SL gateway, РТК (эта модель)

LV434001: IFE Single-breaker Ethernet Interface ❌ No IFM stacking, only one IMU

LV434000: IFM Modbus-SL Interface ❌ Must be connected to LV434002, cannot connect to Ethernet independently

3. Отечественные альтернативы (same function note): ULP is proprietary Schneider bus, domestic gateways cannot interface BSCM directly. Domestic solution requires abandoning ULP and adopting breakers with native Modbus-RTU modules
4. Common troubleshooting
5. ULP LED yellow flashing: Degraded ULP link, excessive cable length, окисленный разъем, missing terminator plug
6. Ecoreach cannot find IFE: Mismatched subnet, DHCP IP failure, crossover cable (auto-adaptive port, incompatible with old switches), excessive 24 V voltage drop
7. Modbus read successful but remote control invalid: Local lock activated, trip latch, защитная блокировка, outdated firmware
8. Modbus-SL communication failure: Отсутствует согласующий резистор, A/B reversed, duplicate address, mismatched baud rate

LV434002 core positioning: One gateway aggregates multiple NSX/MTZ breakers inside one switchboard cabinet via ULP + stacked IFMs, with integrated Modbus-SL gateway. Clearly differentiated from LV434001 which serves only one breaker. Below are industry scenarios and architecture scenarios.

1. Typical industry application scenarios
2. Дата-центр / IDC low-voltage distribution (высокая частота)

Incoming cabinet, bus tie cabinet, UPS output cabinet, precision power distribution cabinet, centralized monitoring of MTZ frame and NSX moulded case breakers

Telemetry electrical parameters, remote signalling for open/close and trip, дистанционное открытие; SMTP-электронная почта / SNMP alarm push for operation & обслуживание; RTC ensures accurate event timestamp

Connect to BMS, environmental monitoring and power SCADA for PUE energy statistics, fault tracing and power outage logging

2. Промышленные предприятия, производственные линии, power rooms, химический / фармацевтический / semiconductor factories

Main distribution panel and MCC motor control centre with multiple NSX breakers in one cabinet, aggregated by one LV434002 + multiple LV434000 IFMs

Connect to factory SCADA and PLC: overload pre-alarm, гармонический мониторинг, load balancing, emergency remote opening; unified maintenance on EcoStruxure Power platform

Прогностическое обслуживание: collect breaker trip history, temperature rise and load trend for scheduled maintenance

3. Коммерческие здания, office towers, больницы, железнодорожный транзит, аэропорты

BMS integration for intelligent LV/MV distribution, sub-metering for lighting, power and air conditioning

Critical load such as hospital: alarm and SOE sequence of event recording for power continuity; local web view, event cache when network offline

Standard configuration for Schneider BlokSeT prefabricated intelligent switchboard with factory-integrated Enerlin’X ULP bus

4. PV, energy storage and EV charging distribution & grid-tie cabinet

Monitoring of NSX/MTZ grid-tie breaker: власть, энергия, trip status, remote opening protection; internal power panel inside energy storage container

Connect to EMS energy management system to collect branch loads for power scheduling

5. Модернизация & renovation projects (very common)

Existing NSX/MTZ already fitted with BSCM/BCM ULP modules. Replace multiple LV434001 one-to-one IFEs with one LV434002 aggregator to save IP addresses and switch ports

Compact DIN rail module with DC24V supply, limited cabinet space; no modification to main circuit, only communication wiring added

1. Architecture selection guide

✅ Suitable for LV434002 (IFE Server)

1. ≥2 intelligent breakers in one cabinet: 1×LV434002 + up to 11×LV434000 IFMs, ULP daisy chain, single Modbus TCP IP for upper system, core advantage over LV434001 one-to-one scheme with higher cost for multi-breaker cabinets
2. Cabinet with ULP breakers plus other RS485 Modbus-SL meters: Integrated Modbus-SL gateway supports up to 20 485 рабы (power meters, температура & humidity sensors, и т. д.) to convert both ULP breaker data and RS485 data to Modbus TCP, saves extra Modbus gateway
3. Local web page, email alarm, independent RTC and offline event log required
4. Batch commissioning via Ecoreach: ULP topology scan, batch firmware upgrade for breakers and communication modules

❌ Не подходит, select LV434001 instead

Only one breaker inside cabinet, no IFM stacking and no external Modbus-SL instruments needed

III. Upper system integration

1. Host SCADA: КингВью, ФорсКонтроль, прикосновение, Schneider EcoStruxure Power, third-party power monitoring platform, ПЛК (Сименс / Mitsubishi etc.)
2. Local O&М: Direct browser access for data, alarm and manual remote control; Ecoreach for commissioning, verification and report output
3. Alarm delivery: Email alarm, SNMP Trap to network management platform
4. Ограничения & design pitfalls
5. ULP is Schneider proprietary bus, only compatible with NSX, MTZ and PowerPact fitted with BSCM/BCM, incompatible with other brands of breakers
6. Dual Ethernet ports support daisy chain only, STP ring redundancy not supported. Redundant network for critical IDC requires additional industrial switch
7. Remote control requires breaker fitted with motor operator and unlocked local remote lock; the module itself only provides communication channel

Schneider Enerlin’X ULP Series LV4340 Main Line Complete Order List

Main line: IFE / IFM communication modules (LV434002 belongs to this group). Classified as Active New / Устаревшая замена / Breaker-side ULP Module / ULP Cable & Аксессуары

1. Core IFE / IFM communication modules (LV4340xx)

1. MT withdrawable embedded IFE (EIFE, separate series)

III. Breaker ULP communication modules (BSCM / BCM, front end for IFM/IFE)

1. ULP dedicated cables (RJ45 proprietary ULP cable, ⚠️ Ordinary Ethernet cable NOT allowed)

1. ULP mandatory accessories

1. Quick selection guide for proposal
2. ≥2 NSX/MTZ breakers in one cabinet, aggregated to Ethernet: LV434002 + multiple LV434000 IFMs
3. Only one breaker in cabinet, direct Ethernet connection: LV434001
4. Breaker only requires Modbus-RTU without Ethernet: LV434000 IFM (connect to third-party Modbus master)
5. Integrated solution for MTZ withdrawable cabinet: Prefer LV851001 EIFE