Bussmann 200FEE High-Speed Semiconductor Fuse - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

วีแชท: +86-13184948252 วอทส์แอพพ์: 0086-13811255435 อีเมล: kent@bestcontactor.com

เกี่ยวกับ ติดต่อ |

Bussmann 200FEE High-Speed Semiconductor Fuse - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

ไฟฟ้า/

Bussmann 200FEE High-Speed Semiconductor Fuse

Basic Information Model: 200FEE Brand: Eaton Bussmann Type: BS88 Part4 / IEC60269-4 high-speed bolted dual-barrel fuse, aR class (for semiconductor protection only) จัดอันดับปัจจุบัน: 200A Electrical Specifications IEC Rating: 690วีและ / 500V DC UL Rating: 700วีและ / 500V DC Breaking Capacity: 200ที่ (AC rms); 50kA @500V DC Pre-arcing I²t: 1900; Total clearing I²t: ...

  • รายละเอียดสินค้า

ข้อมูลพื้นฐาน

แบบอย่าง: 200FEE

ยี่ห้อ: อีตัน บุสส์มันน์

พิมพ์: BS88 Part4 / IEC60269-4 high-speed bolted dual-barrel ฟิวส์, aR class (for semiconductor protection only)

จัดอันดับปัจจุบัน: 200ก

ข้อมูลจำเพาะทางไฟฟ้า

IEC Rating: 690วีและ / 500ในดีซี

UL Rating: 700วีและ / 500ในดีซี

ทำลายความจุ: 200ที่ (AC rms); 50kA @500V DC

Pre-arcing I²t: 1900; Total clearing I²t: 7100@415V, 11400@660V

การกระจายพลังงาน: 52ว

No built-in fuse indicator; external kits TI700, MAI / MBI microswitch assemblies are available

ขนาดการติดตั้ง

Mounting Bolt: ม8

Terminal Centre Spacing: 71มม

การก่อสร้าง: Offset dual-barrel, bolt-connected blade terminals (blade end × blade end)

ขนาดโดยรวม: 187กว้าง มม, 100mm long, 22mm high, น้ำหนักสุทธิ: 89.6ก

การอนุมัติ & มาตรฐาน

ซีอี, RoHS, UL ได้รับการยอมรับ

มาตรฐาน: BS88 Part4, ไออีซี 60269-4

การใช้งานทั่วไป

Short-circuit protection for frequency converters, วงจรเรียงกระแส, DC busbars, DC drives, thyristors and IGBT power semiconductors

Reference Models in the Same Series (FEE Series)

100FEE, 125FEE, 160FEE, 200FEE, 250FEE, 315FEE, ฯลฯ. Same design logic, only rated current differs

หมายเหตุทดแทน

This is a BS88-4 aR high-speed semiconductor fuse. For domestic alternatives, ตรวจสอบ: aR classification, I²t value, ทำลายความจุ, M8 mounting and 71mm centre spacing. Ordinary gG/gL distribution fuses cannot be used as substitutes.

The 200FEE (FEE series BS88 Part4 aR high-speed dual-barrel fuse) has no original standard moulded fuse holder.

It is designed as M8 bolt-on blade terminals (blade end). The standard installation method is direct mounting onto busbars. Holders such as RS200H (Red Spot) are not required (RS200H is for BS88-2 gG distribution fuses and is incompatible with FEE high-speed semiconductor fuses).

อุปกรณ์เสริมเพิ่มเติม (Not Holders – Indicator / Microswitch Kits)

TI700: Fuse indicator kit (indicator flag + คลิป)

MAI: Microswitch adapter (fuse blown alarm signal)

MBI: Microswitch adapter (alternative construction)

Two Engineering Solutions

  1. Standard Solution (Most common for VFD / DC busbars)

Direct busbar mounting with M8 bolts, 71mm terminal centre spacing. TI700 / MAI / MBI may be fitted for blown-fuse signalling as required.

  1. IP20 Enclosed Holder (โซลูชั่นทางเลือก)

No original Bussmann holder is available. Only third-party bolt-on high-speed fuse holders can be selected. Mandatory selection criteria:

Compatible with M8 terminals, 71mm centre spacing, rated ≥200A, 690วี, aR class, breaking capacity ≥200kA

All FEE series models (100FEE /125FEE /160FEE /200FEE /250FEE /315FEE) adopt the same busbar bolt-on design; no original holders are supplied.

200FEE (FEE Series BS88 Part4) Installation Torque & Tightening Specification

บันทึก: The manufacturer datasheet does not specify torque for this individual model. The values below are industry standard practice for Eaton BS88 fuses and busbar connections, widely used for VFD and DC bus projects.

ขนาดสลักเกลียว: ม8 (coarse pitch 1.25), 8.8 grade galvanized bolts preferred

✅ Recommended Torque: 10 น.ม (±1 N·m)

Acceptable Range: 9 น.ม (นาที) ~ 12 น.ม (สูงสุด)

Do not exceed 12 น.ม: risk of deforming fuse copper terminals and uneven contact surfaces. Torque below 9 N·m causes high contact resistance, overheating and nuisance blowing.

  1. Washer Stack Order (from busbar outwards)

Busbar → Fuse blade terminal → Plain washer → Spring washer → Nut

ต้องห้าม: Spring washer between fuse terminal and copper busbar; stacking multiple lugs on one side of a fuse terminal.

  1. Contact Surface Preparation (Critical – aR high-speed fuses are sensitive to contact resistance)
  2. Clean copper busbar and fuse terminal contact faces: remove oxidation with scouring pad / fine abrasive paper until bright, then wipe with isopropyl alcohol.
  3. A thin layer of conductive grease (joint compound) is permitted. Do not apply thick layers, to avoid creepage risk from excess grease squeezing out.
  4. Contact surfaces must be fully mated, free of burrs, gaps and trapped debris.
  5. หลังการติดตั้ง, contact resistance can be checked with a micro-ohmmeter; target per terminal: <50mΩ.
  6. Tightening Procedure
  7. Hand-thread first to align the fuse, keep both terminals parallel and centred.
  8. Tighten with a torque wrench in one smooth movement; avoid repeated back-and-forth adjustment.
  9. Mark the bolt/nut with paint after torque is achieved for tamper/loosening check.
  10. Thermal recheck: after initial energising and 2 hours of load operation, power off and recheck torque. Annual inspection is recommended for long-term service.
  11. เครื่องประดับ (TI700 / MAI / MBI)

Microswitches and indicator flags are clip-on accessories. They do not share the main circuit M8 bolts. Do not squeeze or pull the fuse body during fitting; do not alter the compression of the main electrical joint.

  1. การปฏิบัติที่ต้องห้าม

Do not use A2-70 stainless steel bolts and over-torque (stainless steel has lower yield strength and is prone to thread stripping).

Do not use impact wrenches for final tightening.

Do not force uneven or mismatched busbar thicknesses together.

Do not apply mechanical load or pry on the fuse body.

  1. Common for All FEE Series

100FEE /125FEE /160FEE /200FEE /250FEE /315FEE all use M8 terminals with the same 10 N·m torque specification.

ก่อนหน้า:

ต่อไป:

ทิ้งคำตอบไว้

ฝากข้อความ