แฮ็กโกะ MONITOUCH V810iCN-080 เอชเอ็มไอ - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

วีแชท: +86-13184948252 วอทส์แอพพ์: 0086-13811255435 อีเมล: kent@bestcontactor.com

เกี่ยวกับ ติดต่อ |

แฮ็กโกะ MONITOUCH V810iCN-080 เอชเอ็มไอ - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

บมจ/

แฮ็กโกะ MONITOUCH V810iCN-080 เอชเอ็มไอ

The V8 series HMI is discontinued. It is widely used on legacy equipment (เช่น, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen. Model Code Definition V810: V8 series, 10.4-inch model i: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port) ค: Standard VGA (640×480) economy version N: สัมผัสต้านทานแบบอะนาล็อก ...

  • รายละเอียดสินค้า

The V8 series เอชเอ็มไอ ถูกยกเลิก. It is widely used on legacy equipment (เช่น, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.

คำจำกัดความของรหัสโมเดล

V810: V8 series, 10.4-inch model

ฉัน: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)

ค: Standard VGA (640×480) รุ่นประหยัด

เอ็น: Analog resistive touch panel

080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)

ข้อมูลจำเพาะของฮาร์ดแวร์หลัก

แสดง: 10.4″ จอแอลซีดีสี TFT, 640×480 VGA, 65,536 สี

Touch type: สัมผัสต้านทานแบบอะนาล็อก

แสงไฟ: นำ, rated service life approx. 70,000 ชั่วโมง

หน่วยความจำ: 4.5MB FROM for screen storage; 128เคบี สแรม (for recipes & alarm logs)

Front panel protection: IP65 (with original waterproof gasket), ด้านหลัง IP20

ขนาดโดยรวม: 303.8 × 231.0 × 69.0 มม

Panel cutout size: 289.0 × 216.2 มม (+0.5/-0 ความอดทน)

Rear Interface List

  1. LAN RJ45: 10/100Mbps Ethernet
  2. MJ1, MJ2 (8-pin modular): RS232/485
  3. D-Sub9 (ซีเอ็น1): RS232C / RS422/485
  4. USB-A (เจ้าภาพ), USB-B (Programming slave port)
  5. CF card slot (legacy CF card, not SD card)
  6. 24VDC power terminal block

บันทึก: V810iCN does NOT support GU video/RGB optional modules

ซอฟต์แวร์ & การสื่อสาร

ซอฟต์แวร์การเขียนโปรแกรม: V-SFT-5 / วี-เอสเอฟที-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)

8-way multi-protocol communication: เชื่อมต่อได้ถึง 8 PLCs of different brands simultaneously (มิตซูบิชิ, ซีเมนส์, ออมรอน, เดลต้า, ตัวควบคุมอุณหภูมิ, อินเวอร์เตอร์, ฯลฯ)

ฟังก์ชั่นที่รองรับ: สัญญาณเตือน, กราฟแนวโน้ม, การจัดการสูตร, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & logs

ตัวเลือกการทดแทน (Discontinued Model Upgrade)

  1. Official Series Upgrade: V1010iC (10.4-นิ้ว, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
  2. Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.

คำเตือนที่สำคัญ: V8→V10 project conversion is irreversible. Always back up the original project before conversion.

ข้อผิดพลาดทั่วไป & เคล็ดลับการบำรุงรักษา

Typical failures: Unresponsive touch, touch offset, black screen, backlight failure, communication loss, unreadable CF card

อะไหล่: Touch panel, แสงไฟ LED, power board, CF card, backup battery for SRAM

บันทึกการบำรุงรักษา: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.

Hakko MONITOUCH V8 Series (Hakko Electronics / ฟูจิ อิเล็คทริค) รายการรุ่นเต็ม

The entire V8 series is end-of-life (EOL).

คำอธิบายต่อท้าย

ฉัน: Built-in LAN Ethernet port; no i = no Ethernet port

ส: High-performance model, supports GU RGB video optional modules

ต: Mid-range model

ค: Standard economy model (V810iCN belongs to this branch)

ม: Simplified model exclusive to V806

ช: 7.5-inch handheld type

เอ็กซ์: 15-inch XGA high-end model

เอ็น: สัมผัสต้านทานแบบอะนาล็อก; ดี / 080: แหล่งจ่ายไฟ DC24V

5.7-นิ้ว | V806 Series (320×240 QVGA)

V806M / V806iM

V806C / V806iC

V806T / V806iT

Power variants: V806iCD, V806iTD, V806iMD (ดีซี24วี)

7.5-นิ้ว | Handheld Model V808CH

V808CH / V808iCH

8.4-นิ้ว | V808 Series (640×480 VGA)

V808C / V808iC

V808S / V808iS

Power variants: V808iCD, V808iSD (ดีซี24วี)

10.4-นิ้ว | V810 Series (640×480 VGA, your target model here)

V810C / V810iC (รุ่นประหยัด; V810iCN-080 falls here; iC version cannot install GU video modules)

V810T / V810iT (ช่วงกลาง, supports GU optional units)

V810S / V810iS (ประสิทธิภาพสูง, supports GU video/RGB modules)

Suffix variants: เอ็น (สัมผัสต้านทาน), D/080 (ดีซี24วี), เช่น, V810iCN, V810iTN, V810iSN

12.1-นิ้ว | V812 Series (800×600 SVGA)

V812S / V812iS (ประสิทธิภาพสูง, supports GU video modules)

15-นิ้ว | V815 Series (1024×768 XGA)

V815iX (V8 series flagship; อีเทอร์เน็ต + อินพุตวิดีโอ)

Function Comparison Table

Model BranchBuilt-in LAN (ฉัน)GU Video Module Supportการวางตำแหน่ง
V8xxC (V810iC/V808iC)Optional i❌เศรษฐกิจ (standard for injection molding machines)
V8xxT (V810iT)Optional i✅Mid-range general purpose
V8xxS (V810iS/V812iS/V808iS)Optional i✅ประสิทธิภาพสูง
V815iX✅✅15″ XGA top model
V806MOptional i❌5.7-inch entry-level
V808CHOptional i❌7.5-inch handheld

Optional Units (For V8i models with expansion port, excluding V810iC)

GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit

ซอฟต์แวร์ & การทดแทน

ซอฟต์แวร์การเขียนโปรแกรม: V-SFT5 / V-SFT6

ชุดอัพเกรดอย่างเป็นทางการ: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)

Replacement Model List for V810iCN-080 (Hakko MONITOUCH)

Key specs of original unit: 10.4-นิ้ว, ดีซี24วี, อีเธอร์เน็ตในตัว, economy grade, no video expansion port, cutout size: 289.0 × 216.2 มม

  1. Original Brand Upgrade (ตัวเลือกแรก: Project Migration, No Cutout Modification)

(1) ซีรีส์ V10 (Current Fuji/Hakko Mainstream, Official Recommended Replacement)

V1010iC-D (Top Pick)

✅ Identical panel cutout; no cabinet modification required. V-SFT6 automatically converts V8 project files.

✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.

⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.

V1010iS-D (High-end Alternative)

Supports video input with higher performance, same cutout dimensions for future video expansion needs.

(2) ซีรีส์ V9 (Transitional Discontinued Model, Only Stock Available)

V9100iC (Official designated replacement for V810iC series)

Project migration via V-SFT6. Stock availability is limited; not the first choice.

(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)

V810iTN-080 / V810iSN-080

โครงร่างเดียวกัน & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.

  1. Domestic HMI Replacement (Project Reconfiguration Required)

Selection criteria: 289×216mm cutout, 10.4-นิ้ว, ดีซี24วี, อีเทอร์เน็ต + RS485/232 ports

ไวน์เทค: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)

Kunlun Tongtai: TPC1061Ti (Verify cutout dimensions)

Kinco / ซินเจ: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.

ข้อเสีย: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.

ตารางเปรียบเทียบการเลือก

รุ่นทดแทนNo Cutout ModificationDirect Project MigrationVideo Module Supportสถานะการจัดหา
V1010iC-D✅✅ (V-SFT6 conversion)❌Commercially available
V1010iS-D✅✅✅Commercially available
V9100iC✅✅❌ยกเลิก, only stock/used
V810iTN/080✅✅✅ยกเลิก, secondhand only
Domestic 10.4″ เอชเอ็มไอAdapter plate may be needed❌, full re-programmingDepends on modelAbundant stock

Critical Migration Notes

  1. Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
  2. Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
  3. โปรโตคอลการสื่อสาร (Mitsubishi MC, ซีเมนส์ S7, Omron Hostlink, ฯลฯ) are fully compatible with V10; protocol parameters remain almost unchanged.
  4. Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.

ก่อนหน้า:

ต่อไป:

ทิ้งคำตอบไว้

ฝากข้อความ