OMRON CP1W-8ER โมดูลขยายเอาท์พุตบริสุทธิ์ - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

วีแชท: +86-13184948252 วอทส์แอพพ์: 0086-13811255435 อีเมล: kent@bestcontactor.com

เกี่ยวกับ ติดต่อ |

OMRON CP1W-8ER โมดูลขยายเอาท์พุตบริสุทธิ์ - คอนแทคเตอร์,เบรกเกอร์,เซ็นเซอร์,ตัวเข้ารหัส,บมจ,ตัวแปลง

บมจ/

OMRON CP1W-8ER โมดูลขยายเอาท์พุตบริสุทธิ์

CP1W: Expansion unit for CP1 series 8: 8 points E: Expansion R: Relay normally open (เลขที่) output Type: Pure output expansion module, no input points Core Specifications Number of output points: 8-point relay NO output Rated current per channel: 2 ก (โหลดตัวต้านทาน) Output voltage range: AC/DC 4.5~30 V (passive relay contact) On/off delay: ประมาณ. ...

  • รายละเอียดสินค้า

CP1W: Expansion unit for CP1 series

8: 8 คะแนน

อี: การขยายตัว

ร: Relay normally open (เลขที่) เอาท์พุท

พิมพ์: Pure output expansion module, no input points

ข้อมูลจำเพาะหลัก

Number of output points: 8-point relay NO output

จัดอันดับปัจจุบันต่อช่อง: 2 ก (โหลดตัวต้านทาน)

Output voltage range: AC/DC 4.5~30 V (passive relay contact)

On/off delay: ประมาณ. 15 นางสาว

การใช้พลังงาน: 5 ในดีซี 0.21 ก; 24 ในดีซี 0.13 ก

ขนาด: W66 × H90 × D50 mm

น้ำหนัก: ประมาณ. 250 ก

การรับรอง: ซีอี, แอล, ซีเอสเอ

สถานะวงจรการใช้งาน: คล่องแคล่ว, not discontinued

เข้ากันได้ ซีพียู หน่วย

ซีพี1อี / ซีพี1เอช / ซีพี1แอล (CP1 series PLC); also compatible with legacy CPM1A/CPM2A

บันทึก: 20-point CP1E CPU does not support expansion. Only 30/40/60-point CPUs can connect CP1W expansion units.

Cross-model Comparison (for selection)

CP1W-8ER: 8-เอาต์พุตรีเลย์จุด (passive, เอซี/ดีซีสากล)

CP1W-8ET: 8-จุดเอาต์พุตทรานซิสเตอร์ NPN (DC24V เท่านั้น)

CP1W-8ED: 8-จุด DC24V input module

CP1W-16ER: 16-เอาต์พุตรีเลย์จุด

แนวทางการเดินสายไฟ

  1. Two independent common terminals: COM0 (00~03), คอม1 (04~07)
  2. Relay is dry contact: connect AC L / DC+ to COM as required, then wire the load to the contact terminal
  3. Do not drive high-power motors directly; add intermediate contactors
  4. สำหรับโหลดอุปนัย (โซลินอยด์วาล์ว, คอยส์), install freewheeling diodes (ดี.ซี) or RC snubbers (เครื่องปรับอากาศ) to extend relay life.

การแก้ไขปัญหา

ไม่มีการดำเนินการเอาท์พุต:

1) Check if the expansion cable is firmly plugged in and the CPU recognizes the expansion unit

2) Verify the I/O address assignment (expansion I/O follows the previous unit’s address sequentially)

3) Measure COM power supply and check for open circuits in the load loop

Permanent ON for one channel: relay contact welding; replace the point or the whole module

No output on all channels: expansion function disabled, too many expansion units, or damaged cable.

ตัวเลือกการทดแทน

  1. ทดแทนโดยตรง: CP1W-8ER (ที่ต้องการ, no program modification needed)
  2. Transistor alternative: CP1W-8ET (for high-frequency switching and DC loads; cannot handle AC)
  3. ทางเลือกภายในประเทศ: CP1-bus compatible 8-point relay expansion module (verify bus protocol and address mapping)

Service Life of CP1W-8ER (Limited by relay contacts)

Official rated life per relay channel

  1. ชีวิตเครื่องกล (การทำงานที่ไม่มีการโหลด): ≥20 million operations
  2. ชีวิตไฟฟ้า (2 โหลดแบบต้านทาน): ≥100,000 การดำเนินงาน

จุดสำคัญ: Electrical life is the bottleneck, not the PCB. โหลดอุปนัย (โซลินอยด์วาล์ว, คอยล์คอนแทค) drastically shorten service life down to 20,000~50,000 cycles. Snubber circuits will improve this.

Time Estimation (for project evaluation)

1 operation per minute: 100,000 cycles ≈ 19 ปี

1 operation per 10 วินาที: 100,000 cycles ≈ 2.8 ปี

1 operation per second: 100,000 cycles ≈ 27 ชั่วโมง

For equipment with continuous ON state and rare switching: contact wear is minimal. In clean, temperature-controlled cabinets, the PCB, cable and terminals can run stably for 8~15 years. Service life is halved in high-temperature, สภาพแวดล้อมที่ชื้นและมีฝุ่นมาก.

Two Types of Service Life

Contact life: limited by switching cycles; failure symptoms: contact welding or poor contact

Module body life: พีซีบี, cable and drive circuit; aging depends on environmental conditions, no fixed cycle rating.

Life Extension Tips

  1. Add freewheeling diodes (ดี.ซี) or RC snubbers (เครื่องปรับอากาศ) for inductive loads such as solenoid valves and contactors.
  2. Keep load current below 1 ก; avoid continuous full-load (2 ก) การดำเนินการ.
  3. For high-frequency switching (cycles within seconds), use CP1W-8ET transistor output instead of ER relay modules.
  4. Regularly inspect expansion cables and terminals for oxidation and loose connections.

Full List of ออมรอน CP1W Expansion Units (ซีพี1อี / ซีพี1เอช / CP1L Compatible)

บันทึก: CP1W units are bus-connected expansion modules (daisy-chained with flat cable). CIF, ADB and DAB boards are CPU side option boards (not bus expansion units). 20-point CP1E cannot use expansion units; only 30/40/60-point CP1E, CP1H and CP1L-M support CP1W expansion.

  1. Digital Input Only Units
แบบอย่างคำอธิบาย
CP1W-8ED8-จุดอินพุต DC24V (NPN/PNP universal)
  1. Digital Output Only Units (CP1W-8ER listed here)
แบบอย่างคำอธิบาย
CP1W-8ER8-point relay NO output, 2 ก
CP1W-8ET8-point NPN (กำลังจม) เอาท์พุททรานซิสเตอร์, 0.3 ก
CP1W-8ET18-point PNP (การจัดหา) เอาท์พุททรานซิสเตอร์, 0.3 ก
CP1W-16ER16-point relay NO output, 2 ก
CP1W-16ET16-จุดเอาต์พุตทรานซิสเตอร์ NPN, 0.3 ก
CP1W-16ET116-point PNP transistor output, 0.3 ก
CP1W-32ER32-point relay NO output, 2 ก
CP1W-32ET32-จุดเอาต์พุตทรานซิสเตอร์ NPN, 0.3 ก
CP1W-32ET132-point PNP transistor output, 0.3 ก
  1. ยูนิต I/O แบบผสม (ป้อนข้อมูล + Output integrated)
แบบอย่างคำอธิบาย
CP1W-20EDR112 DC inputs + 8 เอาท์พุทรีเลย์
CP1W-20EDT12 DC inputs + 8 NPN transistor outputs
CP1W-20EDT112 DC inputs + 8 PNP transistor outputs
CP1W-40EDR24 DC inputs + 16 เอาท์พุทรีเลย์
CP1W-40EDT24 DC inputs + 16 NPN transistor outputs
CP1W-40EDT124 DC inputs + 16 PNP transistor outputs
  1. Analog I/O Units (แรงดันไฟฟ้า / สัญญาณปัจจุบัน)
แบบอย่างคำอธิบาย
CP1W-AD0414 AI, ปณิธาน 1/6000; voltage/current selectable
CP1W-AD0424 AI, ความละเอียดสูง 1/12000
CP1W-DA0212 ถึง, ปณิธาน 1/6000
CP1W-DA0414 ถึง, ปณิธาน 1/6000
CP1W-DA0424 ถึง, ความละเอียดสูง 1/12000
CP1W-MAD112 AI + 1 ถึง, ปณิธาน 1/6000
CP1W-MAD424 AI + 2 ถึง, ความละเอียดสูง 1/12000 (ที่นิยมมากที่สุด)
  1. Temperature Input Units (เทอร์โมคัปเปิ้ล / Pt RTD)
แบบอย่างคำอธิบาย
CP1W-TS0012-channel thermocouple (K/J type)
CP1W-TS0022-channel Pt100/Pt1000 RTD
CP1W-TS0032-channel multi-function: เทอร์โมคัปเปิล / RTD / อินพุตแบบอะนาล็อก
CP1W-TS00412-channel thermocouple (for oven & injection molding multi-point temperature monitoring)
  1. เครื่องประดับ (Expansion Cable)
แบบอย่างคำอธิบาย
CP1W-CN81180 cm extension cable; short cable (6 ซม) included with each module

เสริม: CPU Side Option Boards (NOT Bus Expansion Units)

These plug directly into the CPU side slot and cannot be daisy-chained on the I/O bus:

CP1W-CIF01: RS232C

CP1W-CIF11: Non-isolated RS422/485

CP1W-CIF12 / CIF12-V1: Opto-isolated RS422/485

CP1W-CIF41: Ethernet option board

CP1W-DAM01: LCD display panel

CP1W-ADB21 / DAB21V / MAB221: Small analog option boards

คู่มือการเลือกฉบับย่อ

  1. High-frequency switching, โซลินอยด์วาล์ว, servo pulse output → Choose ET / ET1 transistor models, do not use ER relay modules
  2. AC220V loads with infrequent switching → Select ER relay models
  3. Thermocouple temperature measurement: TS001; Pt RTD: TS002; multi-point temperature monitoring: TS004
  4. อนาล็อก I/O: MAD42 (4-เข้า 2 ออก) เป็นที่ต้องการ; new projects select high-resolution AD042 / DA042

 

ก่อนหน้า:

ต่อไป:

ทิ้งคำตอบไว้

ฝากข้อความ