M-SYSTEM W2YV-AAA-M Dual-Output Isolated Signal Conditioner

Mini-MW W2YV Compact Dual-Output Isolator

M-SYSTEM (ญี่ปุ่น), ราง DIN, 4-way galvanic isolation (ป้อนข้อมูล / Output1 / Output2 / แหล่งจ่ายไฟ). Designed for 4~20mA industrial signal isolation, ground loop interference suppression and 1-input 2-output signal distribution.

✅ Model Decoding W2YV-AAA-M

W2YV ①②③ ④

1. ① A: Input signal = DC 4~20mA (Input resistance: 250โอ้)
2. ② A: เอาท์พุต 1 = DC 4~20mA (Max load ≤750Ω)
3. ③ A: เอาท์พุต 2 = DC 4~20mA (Max load ≤350Ω)
4. ④ M: Power supply = AC 85~264V wide-range AC (47~66Hz)

Full definition: 4~20mA input, two independent isolated 4~20mA outputs, AC85-264V powered signal distribution isolator

📋 Core Technical Specifications

🎯 การใช้งานทั่วไป

1. Eliminate ground loop interference between บมจ และ transmitters
2. Distribute one 4~20mA measurement signal to PLC + เครื่องบันทึก / indicator (1-input 2-output signal splitting)
3. Provide galvanic isolation between field transmitters and control room systems to protect AI modules
4. Impedance conversion for parallel acquisition by multiple receiving instruments

⚙️ Selection & ข้อมูลการทดแทน

Same series DC powered variant: W2YV-AAA-R2 (DC11~27V supply)

ทางเลือกภายในประเทศ: Yutong, Chenzhu, Wanxun and other 1-in-2-out 4-20mA isolators (compare isolation rating, accuracy and temperature drift)

บันทึก: The two current outputs have different maximum load limits. OUT2 max load is only 350Ω. Use OUT1 for high-load applications.

📌 Troubleshooting Guide

1. เอาต์พุตไม่ถูกต้อง: Recalibrate ZERO/SPAN on front panel; check 250Ω matching resistor on input loop
2. ไม่มีสัญญาณเอาท์พุต: Verify AC supply 85~264V; check tightness of M3 terminal screws
3. สัญญาณดริฟท์: Check earthing; ensure input side ground is separated from PLC ground. The isolator is used to break common ground.
4. Excessive voltage drop under load: Connect the load to OUT1 channel (OUT1 has higher load capacity)

W2YV (Mini-MW Dual-Output Signal Conditioner) Complete Model Code + รายการรุ่นทั่วไป

W2YV = W2YV-①②③-④⑤

①: Input signal; ②: OUT1 output; ③: OUT2 output; ④: แหล่งจ่ายไฟ; ⑤: คำต่อท้ายเพิ่มเติม

Code Definition

① Input Code

ก: DC 4~20mA, input resistance 250Ω

6: DC 1~5V, input impedance ≥1MΩ

② OUT1 (ช่อง 1, higher load capacity: Max 750Ω)

ก: DC 4~20mA

6: DC 1~5V

③ OUT2 (ช่อง 2; Max 350Ω for current output; ≥5kΩ for voltage output)

ก: DC 4~20mA

6: DC 1~5V

ย: ไม่มีเอาท์พุต (single-output mode)

④ Power Code

ม: AC85~264V (Wide AC)

R2: DC11~27V (24แหล่งจ่ายวีดีซี)

⑤ Options (Suffix /Q, multiple options can be combined)

C01: Silicone coating (ความชื้น & dust protection)

C02: Polyurethane coating

C03: Rubber coating

V01: Multi-turn trim potentiometer

S01: Stainless steel terminal screws

✅ Common Available Models of W2YV Series

1. W2YV-AAA-M: 4~20mA input, dual 4~20mA outputs, AC85~264V (your target model)
2. W2YV-AAA-R2: 4~20mA input, dual 4~20mA outputs, DC11~27V
3. W2YV-6AA-M: 1~5V input, dual 4~20mA outputs, แหล่งจ่ายไฟ AC
4. W2YV-6AA-R2: 1~5V input, dual 4~20mA outputs, แหล่งจ่ายไฟกระแสตรง
5. W2YV-A6A-M: 4~20mA input, OUT1=1~5V, OUT2=4~20mA, แหล่งจ่ายไฟ AC
6. W2YV-AA6-M: 4~20mA input, OUT1=4~20mA, OUT2=1~5V, แหล่งจ่ายไฟ AC
7. W2YV-6A6-M: 1~5V input, OUT1=4~20mA, OUT2=1~5V, แหล่งจ่ายไฟ AC
8. W2YV-A66-R2: 4~20mA input, dual 1~5V voltage outputs, แหล่งจ่ายไฟกระแสตรง
9. W2YV-AAY-M: 4~20mA input, OUT1=4~20mA only, OUT2 no output (เอาต์พุตเดี่ยว)
10. W2YV-666-R2: 1~5V input, dual 1~5V voltage outputs, แหล่งจ่ายไฟกระแสตรง

📌 Other W2 Family Models (Same DIN rail housing as W2 series)

W2XF: Arithmetic signal conditioner (addition / subtraction calculation)

W2VABS: Absolute value signal converter

W2RS: RTD resistance temperature detector isolator

W2YV is only for DC mA/V signal 1-in-2-out isolation and distribution. For temperature measurement or arithmetic functions, select other W2 series models above.

⚠️ Important Selection Notes

1. Mixed output (one current + one voltage): Place current signal on OUT1. OUT1 has higher load capacity (750Ω vs 350Ω of OUT2)
2. Coated versions C01 are recommended for high-humidity and chemical cabinet environments
3. Side-by-side dense DIN installation; no heat dissipation gap required, which is the key advantage of this series

W2YV‑AAA‑M (M-SYSTEM) ขนาดโดยรวม

ความกว้าง(ว) × Height(ชม) × Depth(ดี) = 29.5 มม. × 88.5 มม. × 124 มม

Inch: 1.16″ × 3.48″ × 4.88″

Supplementary Dimension Information

1. การติดตั้งราง DIN: 35ราง DIN มาตรฐาน มม. Modules can be closely mounted side by side, no heat dissipation gap required between modules, ideal for high-density cabinet arrangement
2. น้ำหนัก: ประมาณ. 200ก
3. วิธีการติดตั้ง: DIN rail clip mounting, or base plate screw fixing (2×Φ4.2 mounting holes)
4. เทอร์มินัล: M3 screw terminals. The terminal block protrudes forward; above dimensions refer to maximum overall outline of the unit.

W2YV‑AAA‑M Input Signal Description

For model W2YV-AAA-M specifically: Input is fixed as DC 4~20mA (1st character A), input resistance 250Ω

All Optional Input Types of W2YV Series (1st character in model code)

1. ก: DC 4~20mA (อินพุตปัจจุบัน)

Input resistance: 250โอ้

This is the input specification of your W2YV-AAA-M

2. 6: DC 1~5V (แรงดันไฟฟ้าขาเข้า)

Input impedance ≥1MΩ, high-impedance voltage acquisition

⚠️สำคัญ: W2YV series only has these two factory fixed input ranges. It is NOT programmable. It cannot be modified on-site for 0-10V, 0-20มิลลิแอมป์, thermocouple or RTD signals. If temperature measurement or multi-range programmable function is required, select other W2 series models such as W2XF.

Brief Comparison

เสริม

The input range of W2YV is locked at factory by model coding. It cannot be changed by hardware jumpers on site. Only A (4~20mA) หรือ 6 (1~5V) can be selected during ordering.