إنتاج 19350 مقياس المحسس البلاستيكي

1. المعلومات الأساسية

الاسم الكامل: Production Model 19350 Plastic Feeler Gauge for Automotive Use

Standard English Name: Plastic Feeler Gauge Model 19350

المواصفات الأساسية

1. Number of Blades: 11 pieces per set
2. نطاق القياس: 0.25mm ~ 5.0mm
3. Thickness Sequence of Individual Blades (Full Set of 11 Sizes)

0.25, 0.50, 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 4.50, 5.00 مم

4. الأبعاد الشاملة

Total length: 100مم; Narrow tip width: 6مم; Wide tip width: 12مم

5. مادة: High-strength Nylon / ABS plastic with color coding for thickness identification (Green = 0.25mm, Yellow = 0.5mm, all others white)
6. العلامات: Dual metric (مم) and imperial (بوصة) engraved scales, wear-resistant and fade-proof
7. أصل: Original US industrial measuring tool
8. Core Product Advantages
9. Non-marring to Workpieces: Non-metallic and burr-free. It will not scratch car paint, glass, plastic parts, aluminum alloy or precision interior trims, making it an irreplaceable alternative to metal feeler gauges.
10. Non-magnetic & Non-conductive: Suitable for gap inspection of electronic components, injection molds and low-voltage assemblies without risks of short circuit or magnetization.
11. Rust-proof, Oil & Coolant Resistant: Specially designed for assembly and paint shops of automobile OEMs.
12. Detachable & Combinable Blades: Multiple blades can be stacked to measure any combined gap size.
13. سيناريوهات التطبيق النموذجية

Complete vehicle assembly: Gap inspection of door clearances, hood seams, bumpers and lamp flushness

Glass industry: Gaps between tempered glass and window sealing strips

Injection molds & plastic parts: Parting line gaps

Precision home appliances, interior trims and sheet metal flushness measurement

Cleanroom inspection for gaps of electronic components

4. Comparison of Same Series Models (Model Selection Reference)

5. Industry Terminology Glossary

Plastic feeler gauge

إنتاج 19350

Gap gauge / thickness gauge

Non-mar plastic gauge

Full-industry Application Cases of Plastic Feeler Gauge (إنتاج 19350)

1. Complete Automobile Manufacturing (التطبيق الأساسي, OEM Standard Model 19350)

قضية 1: Flushness & Gap Inspection of Vehicle Exterior Sheet Metal (OEM Assembly Line)

Measuring Points: Paint seams of hood, four doors, tailgate, fenders, headlights, bumpers, radar covers and rearview mirror housings

Process Requirements: Standard door gap: 3.0±0.5mm; Flushness between headlight and fender ≤0.3mm

Operational Advantages: Burr-free plastic material avoids scratches on paint and electroplated trims; metal gauges easily damage coatings and lead to rework & scrapping

Operating Procedure: Take 3 measuring points (left, middle, right) on each seam. Insert Model 19350 blades and record the maximum thickness that slides smoothly as the gap value. Line inspectors conduct full inspection and data logging for every vehicle.

تم حل المشكلة: After replacing metal gauges, the defect rate of paint scratches drops by 90%.

قضية 2: Interior Assembly Inspection for New Energy Vehicles

Inspected Parts: Center console trims, instrument panels, door plastic panels, seat guards, air outlet vents and charging port covers

Working Condition Features: All plastic or soft-wrapped parts; metal gauges tend to leave indentations and scratches

Inspection Standards: Assembly gap of interior trims: 0.5–1.5mm; Step difference ≤0.2mm

سيناريو التطبيق: BYD and Tesla assembly workshops uniformly adopt Production 19350 plastic feeler gauges for final off-line inspection of interiors.

قضية 3: Sealing Strip Gap Control in Paint Shops

Measuring Positions: Gaps between window glass and door sealing strips, trunk waterproof rubber strips

وظيفة: Excessively large gaps cause water leakage; overly tight gaps deform rubber strips. Plastic gauges resist corrosion from paint and cleaning agents without rusting, suitable for humid paint shop environments.

قضية 4: Post-repair Gap Recheck for Auto Repair & Modification

After paint repair at 4S shops, نموذج 19350 is used to verify uniform gaps of doors and hoods to prevent cosmetic defects upon vehicle delivery.

2. Injection Mold & Plastic Component Industry

قضية 1: Routine Inspection of Parting Line & Insert Gaps on Injection Molds

Inspection Items: Closing gaps of front & rear molds, fitting gaps of slide inserts, ejector plate clearances

السيناريوهات القابلة للتطبيق: Optical molds made of PC, ABS and transparent acrylic (mirror-polished cavities must avoid metal scratches)

Process Standard: Parting gap of high-precision optical molds: 0.01–0.03mm. Thin plastic blades are used during daily patrols to check for flash and material leakage.

المزايا: No scratches on polished mold surfaces; stainless steel gauges easily damage cavities and cause mass defective products with surface scratches.

قضية 2: Assembly Gap Inspection of Finished Plastic Housings (Home Appliances / 3C Electronics)

منتجات: TV housings, laptop A/B covers, charger casings, plastic washing machine panels

Inspection Demand: Uniformity of housing closing seams and step difference of snap-fit assemblies. All workpieces are plastic, prone to indentations from metal measuring tools.

Factory Application: Xiaomi and Midea injection molding inspection stations use plastic feeler gauges in batches; the 0.25–5.0mm full range covers all small and large housing seams.

3. إلكترونيات, Precision Electrical & Cleanroom Industries

قضية 1: Gap Inspection of Circuit Boards & Low-Voltage Components

Scenarios: Assembly gaps of PCB housings, relay casings, battery modules and spacing of insulating parts

المزايا الأساسية: Plastic is insulating and non-magnetic, eliminating risks of short circuits and metal debris adsorption that burn circuit boards. Conductive metal gauges are prohibited at electronic workstations.

New Energy Battery Factory Application: Inspection of fitting gaps of PACK module housings to avoid cell extrusion and failure of waterproof seals.

قضية 2: Cleanroom Assembly of Optical Lenses & Camera Lenses

Measurement of gaps between camera lenses, vehicle camera glass lenses and holders. Plastic material will not scratch coating films and produces no metallic dust in cleanroom environments.

4. Machining & Automation Tooling

قضية 1: Gap Calibration of Precision Aluminum Jigs & Fixtures

Aerospace-grade aluminum and 6061 aluminum fixtures feature finely machined surfaces easily scratched by metal gauges. Plastic feeler gauges are used for mass fixture commissioning and daily routine checks.

قضية 2: Gap Adjustment of Conveyors & Robot Joints

Gaps of conveyor belt guards and plastic anti-collision parts on manipulators. Oil and coolant resistant, rust-free for long-term service.

5. Glass, Door & نافذة, Photovoltaic Industry

قضية 1: Sealing Gap Inspection of Automotive Tempered Glass & Architectural Doors/Windows

Gaps between vehicle window glass and rubber sealing strips, and aluminum broken bridge window profiles. Glass has high hardness but fragile edges prone to chipping upon impact from metal gauges.

قضية 2: Frame Seal Inspection of PV Modules

Gap measurement between solar panel aluminum frames and silicone sealants to control waterproof performance. Plastic resists silicone corrosion and is easy to clean.

6. Niche Industry Application Cases
7. Instrument Repair: Calibration of gaps for wind instrument pad shims to avoid metal scratches on silver-plated copper keys and guarantee air tightness & tone quality
8. HVAC Industry: Inspection of gaps at air duct sealing flanges and assembly seams of plastic central air conditioning vents
9. المعدات الطبية: Assembly gap inspection of plastic housings and sterile instruments; non-metallic design eliminates contamination risks from metal debris
10. النقل بالسكك الحديدية: Gap quality inspection of subway plastic interior wall panels and window trims to protect coated interior surfaces
11. Summary of Exclusive Applicable Scenarios for Production 19350 (0.25-5 ملم)
12. Prioritize Model 19350 ل: Large painted surfaces, plastic parts, aluminum alloys, optical components and electronic insulators. Its wide measuring range covers gap inspection of full vehicle exteriors, large molds and home appliance housings.
13. Not suitable for: Micro-precision valve clearances at micron level (ultra-thin metal feeler gauges required) and high-temperature processing environments (plastic prone to deformation).
14. General Core Value: Non-marring, insulating & rust-proof, زيت & solvent resistant, detachable single blades stackable for measuring combined gaps.