Schneider RXM4ABF7 Auxiliary Relay

Segment	Code	Bedeutung
RXM	RXM	Basic identifier for Schneider Zelio series plug-in miniature auxiliary relays
4	4	Contact quantity: 4 change-over contacts (4 C/O / 4PDT), fits 14-pin socket base
AB	AB	Functional features: with lockable test button + mechanical indicator window; 1F7 = without LED, 2F7 = with LED
X	1-2	LED status: 1 = No LED, 2 = With LED indicator
F7	F7	Coil voltage: 120V und, 50/60Hz

Notiz: RXM4ABF7 provided by user is an incomplete model. The full models are RXM4AB1F7 (without LED) and RXM4AB2F7 (with LED).

Grundlegende Spezifikationen

Parameter	Wert	Bemerkungen
Produktserie	Harmony Zelio RXM	Industrial-grade plug-in miniature relay
Kontaktkonfiguration	4 C/O (4 sets of change-over contacts, 4 NEIN + 4 NC)	14-pin Faston flat terminals
Rated Load Current	6A bei 250 V AC / 6A @ 28V DC	Compliant with IEC standard
UL Rated Current	8A @ 30V DC / 6A @ 277V AC	Nordamerikanischer Standard
Maximale Schaltspannung	250V AC/DC	IEC-Standard
Max Switching Capacity	1500VA (Wechselstrom) / 168W (Gleichstrom)	Under rated working condition
Min Switching Capacity	170mW (10mA @ 17V)	Suitable for low-level signal circuits
Spulenspannung	120V und, 50/60Hz	Corresponding to F7 code
Spulenstromverbrauch	Ca. 1020mW	Typical value
Mechanische Lebensdauer	≥10⁷ operations	No-load operation
Elektrische Lebensdauer	≥10⁵ operations	Under rated load
Betriebsfrequenz	≤18000 times/hour (Leerlauf), ≤1200 times/hour (on-load)	–
Dimension (B×H×T)	21mm × 27mm × 35mm	Kompakte Größe, save cabinet space
Montageart	Plug-in-Typ, compatible with RXMZE series sockets	z.B. RXMZE2S114M (14-Stift)
Kontaktmaterial	Silber-Nickel-Legierung (AgNi) with gold-plated flash layer	Improve conductivity and durability
Betriebstemperatur	-40°C ~ +55°C	Großer Temperaturbereich für Industrieumgebungen
Zertifizierungen	CE, CSA, UL, EN/IEC, RoHS	Meet international safety standards

Marke	Modell	Matching Level	Differenzbeschreibung
Omron	MY4N-GS AC120V	★★★★★	4PDT, 6A, with LED, 14-Stift, Direkter Ersatz
Siemens	3RT2017-1BB41	★★★★☆	4PDT, 6A, with LED, verify pin compatibility
ABB	CR-M4SS AC120V	★★★★☆	4PDT, 6A, with test button, slight size difference
Phoenix Contact	REL-MR-120AC/21HC/4	★★★★☆	4PDT, 6A, with LED, same socket mounting way
Weidmüller	DRM570730LT	★★★★☆	4PDT, 6A, with LED, 120V AC-Spule

AC Coil (F7=120V AC, B7=24V AC, P7=230V AC)

DC Coil (BD=24V DC, JD=12V DC, MD=220V DC)

5.1 Kontaktstörungen (Am häufigsten)

Fehlerphänomen	Ursache	Lösungen
Kontaktieren Sie Schweißen	Überlast, electric arc discharge, contact wear	1. Check overload current
		2. Install RC snubber circuit to suppress arc
		3. Replace relay for severe damage
Poor Contact Conductivity	Kontaktoxidation, dust contamination, contact deformation	1. Clean contacts with dedicated cleaner
		2. Check contact pressure
		3. Replace burnt relay
Increased Contact Resistance	Thickened oxide layer on contact surface	1. Polish contact surface gently with fine sandpaper
		2. Match load properly

5.2 Spulenfehler

Fehlerphänomen	Ursache	Lösungen
Burnt Coil	Überspannung, long-term energization, high ambient temperature	1. Stabilize power supply voltage
		2. Optimize control circuit to avoid continuous power-on
		3. Verbessern Sie die Wärmeableitung
Coil No Response	Offener Stromkreis der Spule, wrong wiring, power failure	1. Measure coil resistance with multimeter (Normal: hundreds of ohms)
		2. Check wiring connection
		3. Confirm power supply status
Coil Buzzing Noise	Uneven armature surface, damaged core short-circuit ring	1. Clean and flatten armature and iron core
		2. Replace faulty relay

5.3 Mechanical Faults

Fehlerphänomen	Ursache	Lösungen
Slow Action / Fehler beim Zurücksetzen	Staub & oil intrusion, spring deformation, vibration displacement	1. Clean internal components
		2. Adjust spring tension
		3. Fasten installation to reduce vibration
Invalid Test Button	Button mechanical jamming, internal spring damage	1. Clean button mechanism
		2. Replace relay if unreparable

Anwendbare Felder

Industrielle Automatisierung: PLC signal amplification, motor control circuit, inverter start-stop control
Gebäudeautomation: HVAC damper & Ventilsteuerung, water pump logic control, lighting control
Energiesystem: Switchgear secondary circuit, protection signal switching, instrument signal isolation
Essen & Getränk: Production line interlock control, safety door signal feedback, temperature control circuit
Automotive Industry: Welding workshop equipment control, robot signal relay, production line safety circuit

Typische Anwendungsfälle

Fall 1: Blast Furnace Hydraulic Station Control in Steel Plant

Anwendung: Drive hydraulic solenoid valves to control furnace top equipment

Modell: RXM4AB2BD (24In DC, with LED)

Effect: Quick fault diagnosis via lockable test button, reduce downtime by 40%

Fall 2: HVAC System for Commercial Buildings

Anwendung: Control fan coil electric valves and fresh air damper actuators

Modell: RXM4AB2F7 (120V und, with LED)

Effect: Compact structure saves cabinet space; LED indicator facilitates quick status inspection

Fall 3: Packaging Machinery Production Line

Anwendung: Signal isolation and amplification between PLC and actuators (cylinders, Motoren)

Modell: RXM4AB1P7 (230V und, without LED)

Effect: Offline circuit testing available without shutdown, improve production efficiency

Auswahl & Installationsrichtlinien
Modellauswahl: Select by contact quantity (2/3/4 C/O), Spulenspannung (AC/DC), LED indicator and test button demand
Socket Matching: RXM4AB series must adopt 14-pin sockets such as RXMZE2S114M to ensure correct pin alignment
Lastabgleich: Do not exceed rated voltage and current; install RC snubber circuit for inductive loads
Installationsumgebung: Vermeiden Sie hohe Temperaturen, humid and dusty places, ensure good ventilation
Verkabelungsspezifikation: Wire strictly according to contact numbers to prevent short circuit

Nachricht Handelsnachrichten