contactor,cortacircuitos,inversor solar,medidor electrico,baterias solares
This product is a non-automatic load break isolator from Schneider Electric’s Interpact INS series, with the official order code 31114.
It is designed for power isolation and maintenance safety in low-voltage distribution systems.
It is 3-pole, corriente nominal 630A, rated voltage 690VAC, without short-circuit or overload protection, and is used only for isolation purposes.
- Desglose del modelo
| Parte del modelo | Significado | Key Description |
| Compacto | Product platform | Schneider compact distribution platform, suitable for limited panel space |
| INS | código de serie | Interpact INS series, non-automatic load break isolator, isolation only, no protection |
| 630 | Marco / corriente nominal | Frame size 630A, operational current 630A (AC-22A / AC-23A) |
| 3 Polo | Número de polos | 3PAG (trifásico de tres hilos), sin polo neutro, not suitable for neutral isolation in TN‑S / sistemas TT |
| 31114 | Código de pedido oficial | Unique code for standard version (black rotary handle, montaje fijo) |
- Especificaciones técnicas clave (Official Standard)
| Artículo | Especificación | Norma aplicable |
| Product type | Non-automatic load break isolator | CEI 60947-3, EN 60947-3 |
| Tensión nominal | CA 690V, Ui 750V | Suitable for 380/415/480V industrial systems |
| Corriente nominal | 630A (AC-22A / AC-23A) | Continuous operation ≤ 630A, recommended duty ≤ 80% (≤ 504A) |
| Corriente soportada de corta duración | 11.5kA/3s, 20kA/1s, 4kA/30s | Withstands short-circuit current only, no breaking capacity |
| Impulse withstand voltage | Uimp 8kV | Lightning and overvoltage protection |
| Operación | Mango giratorio manual (negro) | Motor operation available (separate order) |
| Montaje | tipo fijo | Frente / rear connection, 35mm DIN rail or panel mount |
| Protección de ingreso | IP20 body, IP55 with handle | Indoor panels or outdoor enclosures |
| Resistencia mecánica | 10,000 operaciones | Exceeds standard industrial requirements |
- Series Model List (630un marco)
| Modelo (Código de pedido) | polacos | Tipo | Solicitud |
| INS630 3P (31114) | 3PAG | Standard isolator | Incoming, bus-coupler, aislamiento del equipo (3-phase 3-wire) |
| INS630 4P (31115) | 4PAG | Standard isolator | Isolation with neutral (3-phase 4-wire) |
| INS630 3P Changeover (31154) | 3PAG | Manual changeover switch | Mains / generator manual switching |
| INS630 4P Changeover (31155) | 4PAG | Manual changeover switch | 3-phase 4-wire dual power switching |
Extended Current Ratings
| Actual | 3P Code | 4P Code | Breaking Characteristics |
| 400A | 31112 | 31113 | Same as INS630, current only |
| 500A | 31116 | 31117 | - |
| 630A | 31114 | 31115 | This model |
- Recommended Equivalent Models from Other Brands
| Marca | Serie | Modelo equivalente | Matching Parameters | Notas |
| LS Electrico | Meta-MEC IS | IS630N-3P | 3PAG, 630A, 690V, isolator | Economic version |
| TEJIDO | OT | OT630E03 | 3PAG, 630A, 690V, isolator | Visible break |
| siemens | 3KD | 3KD4630-0NE10 | 3PAG, 630A, 690V, isolator | Motor operation compatible |
| Eaton | NZM | NZM3-XT630 | 3PAG, 630A, 690V, isolator | Enhanced interlocking |
| Interruptor Changshu | CM1G | CM1G-630/3300 | 3PAG, 630A, 690V, isolator | Domestic high cost‑performance |
- Aplicaciones típicas (Isolation Only, No Protection)
- Industrial Plants
| Solicitud | Razón | Recommendation |
| Production line main isolation | 630A suitable for ≤315kW three-phase loads | Used in series with NSX630N circuit breaker |
| Large motor circuit isolation | Motors above 200kW (fans, zapatillas, compresores) | Complete protection with contactor & relé |
| Panel bus-coupler isolation | Sistemas de suministro de energía dual | Mechanical interlock recommended |
- Comercial & Edificios públicos
Office / shopping mall incomer isolation with EZD630 breakers
Secondary distribution isolation in hospitals and schools
Infrastructure partial isolation (metro, airport utilities)
- Aplicaciones especiales
Generator outlet isolation ≤500kVA
Capacitor bank isolation ≤300kvar
Construction site temporary power isolation
- Selección & Pautas de operación
- Selection Rules
| Factor | Correct Selection | Risk of Wrong Selection |
| Función | Isolation only; must be used with a circuit breaker | No protection, equipment burnout |
| polacos | 3P for IT systems; 4P for TN‑S / TT | Risk of electric shock without neutral isolation |
| Actual | Total load ≤ 504A (80% duty) | Calentamiento excesivo, reduced life |
| Cortocircuito | System Isc ≤ 11.5kA/3s | Contact welding, failure to open |
- Safety Rules
- Do NOT break under load — operate only at no-load or light load
- Use interlocks with upstream breakers
- Indoor dry environment (-25°C ~ +70°C); outdoor needs IP55 enclosure
- Accesorios: contactos auxiliares, motor operation, padlock attachment available
- Key Difference from Circuit Breaker
| Artículo | Compact INS630 3P | Compact NSX630N 3P |
| Tipo | Load break isolator | Disyuntor de caja moldeada (MCCB) |
| Función | Isolation only | Sobrecarga + protección contra cortocircuitos |
| Capacidad de ruptura | Ninguno, withstand only | Icu = 50kA @ 415V |
| Uso | Manual isolation for maintenance | Automatic protection during operation |
| Conexión | Installed after breaker | Main protection device |
Schneider compacto INS630-3P (código de pedido 31114) es un dispositivo de aislamiento dedicado para el mantenimiento seguro en sistemas de distribución de BT.
It must be used with a circuit breaker.
If you require both protection and isolation, use NSX630N.
For economic alternatives, consider LS IS630N or Changshu CM1G.
