ABB MCCB 1SDA050999R1

Technical Specifications and Application Guide for ABB MCCB 1SDA050999R1

Explication du modèle

Pièce du modèle	Description
1SDA050999R1	Unique global product code for ABB SACE Tmax T series disjoncteur à boîtier moulé
T2S	Série de produits: Tmax T2 series; S stands for standard breaking capacity (50le)
160	Courant nominal du châssis: 160UN
TMD	Type de déclencheur: Déclencheur magnéto-thermique, D-curve (motor protection type)
50-500	Trip unit rated current range: 50UN (noté), 500UN (instantaneous trip value)
3p	Nombre de pôles: 3 poteaux
F F	Montage: Fixé; Connexion: Connexion frontale

Paramètres clés

Paramètres électriques

Article	Valeur
Tension de fonctionnement nominale (Et)	400V et (50/60Hz), 690V AC optional
Tension d'isolement nominale (Interface utilisateur)	690V et
Tension assignée de tenue aux chocs (Ump)	8kV
Courant nominal (Dans)	50UN (adjustable range 50–500A)
Courant nominal du châssis (ICU)	160UN
Pouvoir de coupure	50le (415V et), 36le (690V et)
Courant de tenue de courte durée (Icw)	16le (1s)
Trip curve	Tapez D, conforme à la CEI 60947-2
Thermal trip range	50–500A (réglable)
Magnetic trip range	5–10 pouces (réglable)
Fréquence nominale	50/60Hz compatible

Paramètres mécaniques

Article	Valeur
Mode de fonctionnement	Manuel (standard), motor operation optional
Endurance mécanique	10,000 opérations (at rated)
Endurance électrique	1,000 opérations (rated short-circuit breaking)
Degré de protection	IP30 (conforme à la CEI 60529)
Terminaux	Connexion frontale, suitable for cable cross-section: 16–70mm²
Montage	Fixé, standard 35mm DIN rail mounting

Dimensions de montage

Article	Valeur (mm)
Largeur	90
Hauteur	150
Profondeur	105
Mounting hole pitch	Rail DIN standard de 35 mm
Terminal spacing	Conforme aux normes CEI, suitable for standard cable connections

Notes d'application

4.1 Lignes directrices de sélection

Suitable for motor protection and general industrial power distribution systems, especially where D-curve tripping is required

Derate when ambient temperature exceeds 40°C: 1% per °C rise; max operating temperature 60°C

Derate at altitudes above 2000m: 1% per 100m rise; max altitude 4000m

Select appropriate trip setting current according to actual load, ensuring I_load ≤ In ≤ I_cable

4.2 Exigences d'installation

Ensure breaker is OFF and voltage-free with multimeter before installation

Mount on 35mm standard DIN rail, ensure firm fixing to avoid vibration effects

Tighten terminals with suitable torque (recommended 6N·m) to prevent overheating from poor contact

Keep sufficient heat dissipation space: at least 50mm clearance around the breaker

Avoid installation in damp, poussiéreux, corrosive gas or heavy vibration environments

4.3 Fonctionnement et entretien

Inspect mechanical operating mechanism regularly (annually recommended) to ensure smooth ON/OFF

Test tripping function regularly (semi-annually recommended) to ensure reliable protection

Clean surface with dry soft cloth; avoid chemical cleaners

Record operation count; replace before reaching mechanical endurance

After short-circuit interruption, check breaker condition and replace if necessary

Dépannage

Symptôme de panne	Causes possibles	Solutions
Fails to close	1. Undervoltage trip not powered	1. Vérifier l'alimentation de commande
	2. Bourrage mécanique	2. Operate manually several times to clear jam
	3. Trip unit fault	3. Replace trip unit module
Déclenchements fréquents	1. Surcharge	1. Vérifier le courant de charge
	2. Court-circuit	2. Troubleshoot short circuit
	3. Improper trip setting	3. Reset trip settings
	4. Loose connection causing heating	4. Check and tighten terminals
Contacter l'ablation	1. Long-term overload	1. Replace with higher-rated breaker
	2. Insufficient breaking capacity	2. Upgrade to higher breaking capacity model
	3. Excessive operating frequency	3. Reduce operation frequency or replace suitable model
Trip unit does not operate	1. Trip unit damaged	1. Replace trip unit
	2. Câblage incorrect	2. Check wiring correctness
	3. Excessively low ambient temperature	3. Improve ambient temperature or select low-temperature model
Motor operation mechanism fails	1. Control voltage below 85% Et	1. Vérifier l'alimentation de commande
	2. Limit switch not reset	2. Manually reset limit switch
	3. Motor fault	3. Replace operating mechanism motor

Brand Replacement Solutions

6.1 ABB Alternative Models

Modèle de mise à niveau: XT2S 160 TMA 50–500 3p F F (1SDA067555R1), Tmax XT series, performances supérieures, compatible mounting dimensions

Economic alternative: Formula A1B 125 TMF 50–500 3p F F (1SDA066702R1), moindre coût, same basic protection functions

6.2 Competitive Brand Equivalents

Marque	Modèle de remplacement	Principales différences
Schneider	CVS160F TMD50 3P 50kA	Same breaking capacity, slight dimension difference, consistent trip curve
Siemens	3VL160 50A 3P TMD	Same frame current, 50kA pouvoir de coupure, different operating mechanism design
Chint	NM1-160S/3300 50A	Alternative nationale, rentable, basic functions consistent
Délicieux	CDM1-160S/3300 50A	Alternative nationale, high cost-performance, compliant with IEC standards

Detailed Mounting Dimensions for ABB MCCB 1SDA050999R1

Basic Model and Mounting Type Confirmation

Modèle complet: ABB SACE Tmax T2S 160 TMD50–500 3p F F (1SDA050999R1)

Type de montage: Fixé (F), front connection (F)

Poteaux: 3 poteaux (3p)

Série: Tmax T series (not XT upgraded series)

Core Mounting Dimensions (Unité: mm)

Article	Valeur	Remarques
Largeur (W)	90	Standard 3-pole width, DIN rail compatible
Hauteur (H)	130	Including operating handle, fixed standard height
Profondeur (D)	70	Standard depth for fixed front connection, excluding terminal extension
Montage	Rail DIN standard de 35 mm	Conforme à la CEI 60715, snap-in mounting
Mounting hole pitch	Pour rail DIN 35 mm	Rail thickness 1.0–1.5mm compatible
Terminal spacing	Phase spacing 25mm, N-line spacing 25mm	Standard wiring, suitable for 16–70mm² cable
Terminal height	45mm	From rail plane to top of terminals
Handle height	130mm	From rail plane to top of handle
Poids net	1.12kilos	Without packaging

Detailed Dimension Diagram Description

3.1 Front View Dimensions

Total width: 90mm (3-pôle)

Total height: 130mm (including handle)

Handle travel: environ. 25mm (ON–OFF difference)

Trip indicator window: 30mm from top, centered

3.2 Side View Dimensions

Total depth: 70mm (fixed front connection)

DIN rail slot: 15mm from bottom, 35mm de large

Terminal connection depth: environ. 15mm from front surface

Couple de serrage des bornes: 6N·m (for M6 bolts)

3.3 Installation Clearance Requirements

Emplacement	Min.. Distance	Description
Left and right	50mm	For wiring and heat dissipation
Top and bottom	50mm	Prevent heat buildup, ensure operating space
Front operating space	100mm	For handle operation and maintenance
Rear (in cabinet)	30mm	For cable bending radius

Compatibilité d'installation

4.1 DIN Rail Compatibility

Compatible avec le rail DIN standard de 35 mm (DANS 60715:2001)

Rail material: steel or aluminum, recommended thickness 1.2mm

Mounting clips: self-contained spring clips, no extra fixings needed

4.2 Dimension Comparison with XT Series

Article	Tmax T2S 160 (1SDA050999R1)	Tmax XT2S 160	Différence
Largeur	90mm	90mm	Même, interchangeable position
Hauteur	130mm	130mm	Même, panel cutout universal
Profondeur	70mm	82.5mm	XT series deeper; check cabinet space before replacement
Montage	Même (35mm rail DIN)	Même	Entièrement compatible