Faire la fête 161360 Cylindre à biellette carrée standard

Numéro d'article.: 161360

Model Name: DNC-40-80-PPV-A

Catégorie de produit: Standard square tie-rod cylinder (OIN 6431 compliant cylinder)

Répartition du code modèle

DNC: ISO standard tie-rod cylinder series

40: Alésage 40 mm

80: Stroke length 80 mm

PPV-A: Adjustable end cushioning with pneumatic cushion pistons at both ends

2. Spécifications techniques de base

2.1 Dimensional Specifications

Diamètre d'alésage: 40 mm

Working stroke: 80 mm

Piston rod diameter: 16 mm

Mounting standard: OIN 6431 / VDMA 24562

2.2 Pression & Moyen

Plage de pression de fonctionnement: 0.6 ~ 10 bar

Maximum withstand pressure: 12 bar

Moyen: Air comprimé sec (40 précision de filtration en µm, oil-free or lightly lubricated air acceptable)

Température ambiante: -20 ℃ ~ +80 ℃

2.3 Amorti & Scellés

Cushioning type: Adjustable pneumatic cushioning at both ends (PPV)

Cushion travel: Environ. 19 mm

Matériau du joint: Wear-resistant PU polyurethane seals, resistant to common contaminants in compressed air

2.4 Output Force (Theoretical Value @ 0.6MPa)

Extending thrust: 754 N

Retracting pull force: 634 N

3. Montage & Port Interfaces

Air tube ports: G1/4 (air ports at both cylinder ends)

Type de montage: Basic tie-rod design, compatible with accessories (trunnion mounts, foot brackets, brides, intermediate lugs)

Piston rod thread: M16×1.5 external thread

4. Poids & Applications typiques

Overall weight: Environ. 1.35 kg

Applications typiques: Automated conveying, stamping positioning, machine tool clamping, lignes de production d'emballages, material sorting & pushing, automotive tooling fixtures

5. Matching Replacement & Accessoires en option
6. Accessoires de montage: SNCL-40 foot bracket, ZNCF-40 front flange, SNCB-40 trunnion support
7. Sensor accessories: Proximity sensor SMT-8M-A; built-in magnetic ring, no extra installation required
8. Consumable spare parts: Repair kit DNC-40-KP (complete seal set)
9. Alternative Model References

New upgraded model with identical dimensions: DSBC-40-80-PPVA-N3 (new generation upgraded DNC cylinder, structurally compatible for direct replacement)

Short-stroke light-load alternative: ADN-40-80-P-A (compact flat cylinder with smaller footprint)

7. Key Differentiation Note

161360 corresponds to DNC-40-80-PPV-A, equipped with pneumatic cushioning at both ends.

Models without the PPV-A suffix have no cushioning, produce heavy impact, and are unsuitable for high-speed working conditions.

Complete Technical Data for Faire la fête CPV14-M1H-5LS-1/8

1. Basic Item Information

Modèle: CPV14-M1H-5LS-1/8

Valve Terminal Series: Single solenoid valve for CPV14 compact valve terminals

Common Item Code: 162609

Segment-by-Segment Model Definition Table

2. Valve Function Definition – 5/2-Way Single Solenoid Spring Return
3. Air circuit layout: 5 air ports, 2 operating positions
4. Actuation principle: Solenoid energization triggers valve shift; spring automatically resets the valve when de-energized
5. Air Circuit Distribution

Bobine alimentée: Supply port P → Working port A; Chamber B exhausts

Bobine hors tension (retour à ressort): Supply port P → Working port B; Chamber A exhausts

4. 5LS Feature: Integrated one-way flow control on working outlets, independent speed adjustment for extend and retract strokes of chambers A and B
5. Spécifications électriques de base
6. Standard coil voltages (2 common variants)

DC24V: Standard industrial type, coil power 1.8W

AC230V: Type CA, power consumption 3.6VA

2. Interface électrique: Standard MIDC 8mm multi-pin socket, Indice de protection IP65 (with sealed plug)
3. Classe d'isolation: Classe B; allowable voltage fluctuation ±10%
4. Valve body protection rating: IP65 (when plug and sealing ring are correctly assembled)
5. Spécifications pneumatiques
6. Port Sizes

Supply P, exhaust R1/R2: G1/8

Working outputs A, B: G1/8

2. Fluide de fonctionnement: Filtered dry compressed air with 40 μm filter element; oil-free or lightly lubricated air acceptable
3. Pression de service: 2 ~ 8 bar; maximum withstand pressure 10 bar
4. Débit (@ ΔP=1bar)

Standard flow per channel: Environ. 700 l/min

5. Flow control: Adjustable integrated one-way flow control needle valves on outlets A and B (unique to 5LS version)
6. Température de fonctionnement: -5℃ ~ +50℃
7. Mécanique & Données de montage
8. Valve width: 14 mm (uniform width for all CPV14 series valves)
9. Méthode de montage: Snap-in installation onto CPV14 valve terminal manifold bases
10. Poids: Environ. 85 g per single valve module
11. Exhaust mode: Central exhaust or individual exhaust selectable (determined by valve terminal base)
12. Compatible Matching Valve Terminal Bases

CPV14-GE series manifolds for multi-station valve terminal assemblies:

CPV14-VI Valve terminal end plate

Multi-station bases including CPV14-GE-8, CPV14-GE-10

Bus-type bases: CPV14-GE-DI02, CPV14-GE-PNP and other digital input bus valve terminals

7. Distinction of Similar Alternative Models
8. CPV14-M1H-5JS-1/8: Basic version without integrated flow control, moindre coût
9. CPV14-M2H-5LS-1/8: Double solenoid latching valve that maintains position after power cut; cannot directly replace this model
10. Upgraded series alternative: OVEL-14 new generation compact valve, compatible mounting dimensions and higher flow capacity
11. Scénarios d'application typiques

Small automated equipment, machines d'emballage, 3C tooling fixtures, conveying cylinder control, small clamping cylinders, tri & pushing mechanisms. Ideal for centralized control of multiple cylinders to save installation space.

9. Pièces de rechange consommables
10. Solenoid plug: MSSD-EB (standard DC24V plug)
11. Repair kit: CPV14-KP valve spool seal kit
12. Silencieux: U-1/8 matched exhaust silencer