Contacteur,disjoncteur,onduleur solaire,compteur électrique,batteries solaires
Schneider GVAE20
- Interprétation du code modèle
| Segment de code | Description |
| GV | Code de série de produits, accessory of TeSys GV motor circuit breaker |
| AE | Position de montage & taper; A=Auxiliary contact, E=Front Mounting |
| 20 | Configuration des contacts; 2 contacts, 0=Normally Open, namely 2NO |
Nom et prénom: Schneider TeSys GV Series Front-mounted 2NO Instant Bloc de contact auxiliaire
- Main Technical Parameters
| Élément de paramètre | Spécification |
| Type de produit | Instant Auxiliary Contact Block |
| Configuration des contacts | 2NON, instantaneous operation |
| Courant opérationnel nominal | CA: 2.5UN(240V), CC: 1UN(60V) |
| Tension d'isolation nominale | 380V et |
| Tension de fonctionnement nominale | CA: 24-240V, CC: 24-60V |
| Minimum Switching Current | 5mA |
| Type de montage | Front Mount, compatible with GV2/GV3 motor circuit breakers |
| Type de câblage | Screw Clamp Terminals |
| Applicable Models | GV2L, GV2LE, GV2ME, GV2P, GV2RT, GV3L, GV3P, LS1D32 |
| Dimension | 28.956mm(L) × 22.5mm(W) × 45mm(H) |
| Poids | 0.02kilos (environ. 20g) |
| Température ambiante | -25°C ~ +60°C |
| Degré de protection | IP20 (Conforme à la CEI 60529) |
| Numéro de commande | GVAE20, EAN: 3389110343465 |
| Conditionnement | 10 pcs per standard pack |
- Liste des modèles de la série complète
Schneider GV auxiliary contacts are divided into front-mounted GVAE and side-mounted GVAN series.
| Série | Modèle | Type de contact | Mounting Position | Applicable Products |
| GVAE Front Mount | GVAE1 | 1NO or 1NC convertible | Devant | GV2/GV3 Series |
| GVAE11 | 1NON+1NC | Devant | GV2/GV3 Series | |
| GVAE20 | 2NON | Devant | GV2/GV3 Series | |
| GVAN Side Mount | GVAN11 | 1NON+1NC | Side | GV2/GV3 Series |
| GVAN20 | 2NON | Side | GV2/GV3 Series | |
| GVAD Fault Contact | GVAD1010 | 1NO alarm +1NO auxiliary | Front/Side | GV2/GV3 Series |
| GVAD0110 | 1NC alarm +1NO auxiliary | Front/Side | GV2/GV3 Series | |
| GVAD1001 | 1NO alarm +1NC auxiliary | Front/Side | GV2/GV3 Series | |
| GVAD0101 | 1NC alarm +1NC auxiliary | Front/Side | GV2/GV3 Series |
- Cross-brand Replacement Reference
| Modèle Schneider | ABB Equivalent | Siemens Equivalent | Eaton Equivalent | Replacement Features |
| GVAE20 (2NON, Front Mount) | 2CCS800900R0021 (S800 series, 4UN) | 3RH1921-2XA22-0MA0 (Clip mount, 6UN) | DILM series auxiliary contact (5UN) | Identical contact layout, fit respective brand motor breakers; slight rated current difference |
Conseil de sélection: 2NO front mount choose GVAE20; ABB S800, Siemens 3RH, Eaton DILM
- Défauts courants & Solutions
| Phénomène de défaut | Causes possibles | Solutions |
| Contact failure | Improper installation, stuck mechanism, damaged linkage | Reinstall firmly, clean foreign matters, replace contact block |
| Mauvais contact | Oxidation, loose terminal, severe wear | Polish contact surface, retighten wiring, replace component |
| Contacter l'ablation | Overload current, frequent switching, surtension | Control current within 2.5A, reduce frequent operation, verify voltage range |
| Difficult installation | Model mismatch, wrong direction, broken buckle | Confirm GV2/GV3 compatibility, install as arrow direction, replace part |
- Air Transport Compliance & Certifications
6.1 Air Transport Compliance
No built-in lithium battery or supercapacitor, pure electromechanical component, meets international air safety standards
Cargo category: general goods, no special shipping label required
Standard anti-static packaging to avoid transit damage
6.2 Attestation
| Attestation | Standard | Remark |
| Sécurité électrique | CEI 60947-5-1, UL 508, CSA C22.2 No.14, CCC, CAE | Multi-country safety approval |
| Protection de l'environnement | RoHS, REACh, Prime verte | Hazardous substance free |
| UK Market | UKCA | Valid for UK sales |
| Antidéflagrant | Sans objet | For general industrial use only |
- Application Cases & Industry Guidelines
7.1 Scénarios d'application typiques
Centre de contrôle des moteurs (Centre multicompte): Status monitoring and control circuit expansion
Automatic production line: Motor feedback signal for PLC and HMI display
Water pump control system: Fault alarm and automatic switching
Fan control circuit: Interlock and safety protection signal output
Compressor unit: Remote monitoring and automatic start-stop control
7.2 Industry Application Guide
| Industrie | Operation Feature | Conseils de sélection |
| Fabrication | Frequent start-stop, harsh environment | Match GVAE20 with GV2/GV3 for stable signal transmission |
| Pétrochimique | High explosion-proof demand, severe working condition | Applied in non-explosion area with certified control cabinet |
| Automatisation des bâtiments | Espace compact, installation facile | Front mount saves cabinet internal space |
| Traitement de l'eau | Humid and corrosive environment | Adopt high protection grade breakers matched with GVAE20 |
| Power Industry | Haute fiabilité, continuous operation | Regular contact inspection to ensure steady signal output |
7.3 Application Case
Project: Motor Control Upgrade for Auto Parts Production Line
Exigence: Original circuit only has main circuit protection, lacking remote monitoring and early warning function
Solution: Install GVAE20 on GV2 breakers, connect 2NO contacts to PLC digital input module and HMI system
Effet:
Real-time motor running status monitoring realized
30% downtime reduction via fast fault location
Improved automation level and lower manual inspection cost
- Quick Selection Rules
- Type de contact: 2NO=GVAE20, 1NO+1NC=GVAE11, convertible contact=GVAE1
- Mounting way: Front=GVAE series, Side=GVAN series
- Compatibilité: Exclusive for Schneider GV2/GV3 motor circuit breakers
- Current limit: Max 2.5A AC / 1A DC for control circuit
- Couple de câblage: 0.8-1.2 Nm for screw terminals
