Interruttore di corsa Chint YBLX-ME/8111

IL Cinto travel switch YBLX-ME/8111 is a direct-acting limit switch suitable for industrial automation control. It adopts a direct-pressure plunger operation mode and has the following core features:

The specific parameters of the Chint travel switch YBLX-ME/8111 are as follows:

1. Parametri Elettrici

Tensione nominale: 380V e (AC-15 load) or 220V DC (DC-13 load)

Corrente nominale: 10A under AC-15 load, 0.16A sotto carico DC-13

Tipo di contatto: 1 normalmente aperto + 1 normalmente chiuso (1NO + 1NC)

Vita elettrica: No less than 10,000 cycles under normal load

Tensione di isolamento nominale: 415V

Impulse Withstand Voltage 2.5kV

Frequenza operativa: Mechanical operation frequency 120 volte/min, electrical operation frequency 30 volte/min

2. Prestazioni meccaniche

Modalità operativa: Direct-pressure plunger type

Actuating Force: 15N

Actuating Stroke: 5mm, over-travel 2mm, total stroke 7mm

Livello di protezione: IP62 (dust-proof and splash-proof)

Temperatura operativa: -5°C~+40°C

Categoria di installazione: Category II

Grado di inquinamento: Livello 3

3. Certificazioni e standard

Certificazione nazionale: China CCC Certification

Standard internazionali: Conforme a GB/T 14048.5 e CEI 60947-5-1

4. Caratteristiche fisiche

Materiale dell'alloggiamento: Lega di alluminio

Operating Head Material: Silver contacts

Peso: Approximately 200g (estimated based on similar series products)

Dimensioni complessive: Approximately 73mm×40mm×28.5mm (lunghezza×larghezza×altezza, reference drawings of similar series products)

Mounting Hole Size: 2×φ12mm, spacing 50mm

5. Adattabilità ambientale

Altitudine: ≤2000 metri

Condizioni di umidità: Relative humidity ≤50% at maximum temperature +40°C; maggiore umidità consentita a temperature più basse (per esempio., humidity ≤90% at 20°C)

Vibration Requirements: Installation location should be free from significant vibration

6. Precauzioni

Over-travel Limitation: Total stroke shall not exceed 7mm to avoid internal structure damage

Operation Speed: Extremely slow or fast operation may cause contact instability or mechanism damage; use at rated frequency is recommended

Limitazione del carico: Not recommended for micro-loads (per esempio., voltage ≤100V), which may reduce contact reliability

2. Scenari applicativi

This switch is mainly used for stroke control of moving mechanisms, ad esempio:

– Limit protection for machine tools and elevators

– Position detection in motor control circuits

– Program control in automated production lines

3. Note di installazione e utilizzo
4. Requisiti di installazione

– Must be installed vertically to avoid internal structure damage caused by excessive over-travel (total stroke ≤7mm)

– Refer to the product manual for fixing hole dimensions; use of standard wires for connection is recommended

2. Condizioni ambientali

– Avoid use in flammable, esplosivo, o ambienti corrosivi

– Installation location should be free from significant vibration and at an altitude not exceeding 2000 metri

4. Purchase and Market Information

Mercato internazionale

– Current search results do not clarify whether this model has passed UL certification or is sold in the U.S. mercato

– Chint Power has photovoltaic projects in the U.S., but local supply information for travel switches needs further confirmation

5. Documentazione tecnica e supporto

– Chint’s official website provides the 2025 product catalog, 3D models, and user manuals for download and reference

– Customer Hotline (Whatsapp): +86 13811255435 (Manual service hours: 08:00-19:00)

6. Modelli alternativi

For other operation modes, refer to products in the same series:

YBLX-ME/8108: Adjustable roller rotation type, actuating force 12N

YBLX-ME/8112: Direct-pressure plunger with roller, actuating force 20N

It is recommended to select appropriate models based on specific application requirements and purchase through formal channels to ensure genuine products and after-sales support. For compliance in the U.S. mercato, directly contact Chint’s official team or local distributors to confirm certifications and supply status.