コンタクタ,サーキットブレーカー,ソーラーインバーター,電気メーター,太陽電池
ABB 2UEA001345 (ACS 2040-PMK1000) 4kV Phase Module Kit
ABB 2UEA001345 is a dedicated phase module kit for ACS 2040 series 4kV medium-voltage frequency converters. It serves as the core power unit of the ACS2000 medium-voltage drive system, adopting 3-level IGBT topology. It is applicable to 4kV power grid systems with rated power ranging from 300-1000HP (225-750kW).
Its core strengths include high-reliability design (MTBF＞100,000 hours), 低高調波出力 (IEEEに準拠 519 標準), modular structure for easy maintenance and replacement, and wide operating temperature range (-10℃～+40℃). It is perfectly suited for general industrial loads such as fans, ウォーターポンプとコンプレッサー, which can effectively improve system energy efficiency (20%-40% 省エネ) and reduce maintenance costs.
- 型式コードの説明
| セクション | コード | 意味 |
| 製品シリーズ | 2UEA | Series code for ABB medium-voltage inverter power modules (2UEA=ACS 2040 シリーズ, 2UEB=ACS 2000 シリーズ) |
| 部品番号 | 1345 | Unique identification code of phase module kit, corresponding to model ACS 2040-PMK1000 |
| 適用電圧 | 4kV | Matches 4000V medium-voltage power grid system |
| 製品タイプ | PMK1000 | Phase Module Kit, 定格電流: 1000あ |
| 適用システム | ACS 2040 | Compatible with ABB ACS 2040 series medium-voltage inverters |
注文番号: 2UEA001345 (Standard single packing)
Matching Model: 2UEA001141 (Complementary phase module of the same series)
- 主な技術仕様
| カテゴリ | アイテム | パラメータ | 備考 |
| 基本情報 | 製品タイプ | 4kV Medium Voltage Inverter Phase Module Kit | 3-level IGBT topology, integrated drive and protection circuits |
| Applicable Inverter | ACS 2040 シリーズ (ACS2000 Platform) | Compatible with Frame 1 サイズ (300-1000HP) | |
| 定格電圧 | 4kV (4000V) | 動作電圧範囲: 3.6~4.4kV | |
| 定格電流 | 1000あ | Max peak current: 2000あ (2 times rated value) | |
| Power Devices | IGBT Type | High-voltage IGBT Module | 1700V/1200A, ABB customized version |
| Topology | 3-level NPC (Neutral Point Clamped) | Reduce dv/dt and motor insulation stress | |
| Cooling Mode | 強制空冷 | 冷却ファン内蔵, redundant design supported | |
| 電気的パラメータ | 入力周波数 | 50/60Hz, ±5% | Compatible with global power grid standards |
| スイッチング周波数 | 2~8kHz (調整可能) | Balance energy efficiency and noise performance | |
| 電力損失 | 約. 1.2kW per module | Under typical working conditions | |
| 絶縁クラス | Overvoltage Category IV (IEC 60664) | Meet insulation requirements of medium-voltage systems | |
| 機械的パラメータ | 寸法 (長さ×幅×高さ) | 650×450×320mm | Standard Frame 1 サイズ |
| 正味重量 | 48.5kg | Excluding packaging | |
| 保護クラス | IP20 | キャビネットの設置に適しています | |
| 保護機能 | 過電流保護 | 2000あ (2 times rated) | Short-circuit response time ＜10μs |
| 過電圧保護 | 4.4kV | DC bus overvoltage protection | |
| Over-temperature Protection | 100℃ | IGBT module overtemperature protection | |
| 不足電圧保護 | 3.6kV | Grid undervoltage protection | |
| 認証 & コンプライアンス | CE証明書 | はい | EN準拠 61800-5-1 |
| UL証明書 | はい | Meet North American medium-voltage equipment standards | |
| IEEE 519 コンプライアンス | はい | Total harmonic distortion ＜5% |
- Full Model List of ACS 2040 Series Phase Modules
| モデル | 注文番号. | 定格電圧 | 定格電流 | Applicable Inverter | 注意事項 |
| ACS 2040-PMK1000 | 2UEA001345 | 4kV | 1000あ | ACS 2040 フレーム 1 | Standard phase module |
| ACS 2040-PMK1000 | 2UEA001141 | 4kV | 1000あ | ACS 2040 フレーム 1 | Complementary phase module |
| ACS 2040-PMK1200 | 2UEA001346 | 4kV | 1200あ | ACS 2040 フレーム 1 | High current version |
| ACS 2040-PMK800 | 2UEA001347 | 4kV | 800あ | ACS 2040 フレーム 1 | Low current version |
| ACS 2040-PMK1000-6kV | 2UEA001348 | 6kV | 1000あ | ACS 2040 フレーム 2 | 6kV dedicated version |
- 交換 & 同等モデル
4.1 Internal ABB Replacement
| 旧モデル | 新モデル | 代替品の説明 |
| ACS 1040-PMK1000 | ACS 2040-PMK1000 (2UEA001345) | Upgraded to 3-level topology, efficiency increased by 2%, harmonic distortion reduced by 30% |
| ACS 2040-PMK800 (2UEA001347) | ACS 2040-PMK1000 (2UEA001345) | Higher current model in the same series, wider power coverage |
4.2 Cross-brand Equivalent Products
| ブランド | 同等モデル | 利点 |
| シーメンス | SINAMICS GM150 Power Module | Superior 3-level topology, lower dv/dt, better motor insulation protection |
| シュナイダーエレクトリック | アルティバール 6100 Medium Voltage Module | Easier maintenance with modular design, higher MTBF (＞100,000 hours) |
| 三菱電機 | MV-VFD Power Module | Wider applicable voltage range (3.6-4.4kV), より強い環境適応力 |
- アプリケーションシナリオ & 業界の事例
5.1 推奨アプリケーション
| アプリケーションの種類 | 一般的な作業条件 | 主な利点 |
| Industrial Fans | Power plant induced draft fans, cement plant kiln fans, steel plant dust removal fans | Wide speed regulation range (0.1-100Hz), 30%-40% 省エネ |
| Industrial Water Pumps | Water plant high-pressure water supply pumps, mine drainage pumps, petrochemical circulating pumps | Soft start without impact, reduce pipeline stress and extend service life |
| コンプレッサー | エアコンプレッサー, natural gas compressors, 冷凍コンプレッサー | Precise pressure control, reduce no-load loss and improve energy efficiency |
| コンベヤ | Long-distance mine conveyors, port container conveyors | Smooth speed regulation, avoid material accumulation and mechanical wear |
| General Industrial Equipment | ミキサー, 破砕機, 押出機, 等. | Modular design for convenient maintenance, MTBF＞100,000 hours |
5.2 Not Recommended Usage Scenarios
防爆エリア (non-explosion-proof structure, customized version required)
オフショアプラットフォーム (additional anti-corrosion treatment needed)
Ultra-high voltage systems above 4.4kV (select 6kV version instead)
Equipment with frequent start-stop operations (より多い 10 1時間あたりの回数, special customized modules recommended)
5.3 実際の事例
場合 1: Induced Draft Fan Renovation in Thermal Power Plant
独自のシステム: Fixed-speed motor + baffle adjustment, high energy consumption and severe baffle wear
Renovation solution: ACS 2040 インバータ + 3 sets of 2UEA001345 phase modules (3-段階)
効果: エネルギー消費量の削減 38%, 年間の電気代の節約について 1.8 百万元, baffle maintenance cycle extended 5 回
場合 2: High-pressure Water Supply System for Large Water Plant
要求: Constant pressure water supply with large load fluctuation (20%-100%)
解決: ACS 2040 フレーム 1 (3 pcs 2UEA001345 modules) + PID control system
効果: Stable pressure deviation within ±0.05MPa, 32% 省エネ, service life extended by 3 年
- 航空輸送のコンプライアンス & 認定ガイド
6.1 Shipment Compliance Confirmation
| アイテム | 状態 | 説明 |
| 内蔵リチウム電池 | いいえ | Only electronic components and IGBT modules equipped |
| 危険物の分類 | 非危険物 | IATA DGRクラスに準拠 9, no special shipping restrictions |
| Transport Restrictions | なし | Can be shipped as ordinary industrial equipment |
| 包装規格 | Standard shockproof package | Fix IGBT modules firmly to avoid damage during transit |
| 温度範囲 | -20℃～+50℃ | Avoid extreme temperature during transportation |
6.2 Certification Document Acquisition
CE証明書: Available for download on official ABB website (Document ID: ACS2000-PHTC01U-EN)
UL証明書: Apply via ABB global technical support center
メーカーの宣言: Including EMC, safety and RoHS compliance statements
- 選定ガイドライン & クイックルール
選択ルール
- 電圧マッチング: 2UEA001345 for 4kV systems; choose 2UEA001348 for 6kV systems
- 現在の選択内容: 1000A standard (PMK1000), 800A low current (PMK800), 1200大電流 (PMK1200)
- システムの互換性: Only applicable to ACS 2040 シリーズ (ACS2000 platform) フレーム 1 サイズ
- Quantity Matching: 3 phase modules required for one 3-phase inverter, 1 spare module is recommended
- メンテナンスのヒント: Regularly inspect cooling fans, replace IGBT modules every 5 years to ensure stable insulation performance
- Main Accessories & 推奨される構成
| 付属品名 | モデル | 関数 |
| コントロールユニット | ACS 2040-CU | Core control unit matched with phase modules |
| 冷却ファン | 3HAC031683-001 | Special cooling fan for phase modules, support redundant operation |
| Drive Board | 3HAC031684-001 | IGBT drive circuit with integrated protection functions |
| Voltage Sensor | 3HAC031685-001 | 4kV system voltage monitoring, realize over/under voltage protection |
| Current Sensor | 3HAC031686-001 | 1000A current detection, 過電流 & 短絡保護 |
| 取り付けキット | 3HAC031687-001 | Including fixing bolts, gaskets, insulating sleeves etc. |
