IFM IIT205 IFM Inductive Proximity Sensor

注文コード: IIT205 (IIB3014BBPKG/V4A/US-104)

Hygienic M30 flush-mount inductive sensor, specially designed for food, beverage and pharmaceutical applications with cleaning cycles

✅ Key Specifications

電気データ

電源電圧: 10…30 V DC

出力: PNP normally open (いいえ), 3-ワイヤー

定格検出距離 Sn: 14 mm, flush mountable

Effective sensing range: 0～11.34 mm; tolerance ±10%

スイッチング周波数: 100 Hz

Continuous output current: 100 ミリアンペア

電圧降下: ≤2.5V

無負荷電流: 10 mA@24VDC

保護: 逆極性保護, パルス短絡保護, 過負荷保護

ヒステリシス: 1～20% Sr; switching point shift: -10～+10% Sr

金属の削減要因 (重要)

Steel=1; Stainless steel=0.7; Brass=0.5; Aluminium=0.4; Copper=0.3

機械式 & 環境データ

ハウジング: M30×1.5, overall length L=50 mm

取り付け: フラッシュマウント

保護クラス: IP68 / IP69K (high-pressure washdown capable)

周囲温度: 0 … +100 ℃

重さ: 103.9 g

ハウジング材質: V4A stainless steel, gold-plated contacts, resistant to repeated exposure to cleaning agents

インジケータ: Multi-directional yellow LED for switching status

認証: CE, cULus, EAC, suitable for food industry

📌 Model Code Explanation

IIT205 = IIB3014BBPKG/V4A/US-104

Ⅱ: 誘導センサー

B: Cylindrical threaded housing

30: M30 thread

14: 定格検出距離 14 mm

B: フラッシュマウント

B: PNP normally open

PKG: M12 4ピンプラグ接続

V4A: ステンレススチール製ハウジング

US-104: Hygienic high-temperature version

🛠️ Application Fields

食品機械, 充填ライン, 製薬機器, washdown stations, metal target detection under frequent CIP/SIP high-pressure cleaning and high-humidity high-temperature conditions; suitable for level detection, metal workpiece presence check and cylinder position feedback.

⚠️セレクション & 設置ガイドライン

1. フラッシュマウント: The sensor face can be recessed into metal brackets; the surrounding metal of the mounting surface will not reduce the sensing distance.
2. ステンレススチール製ハウジング + IP69K rating, resistant to alkaline cleaners and hot high-pressure washdown; NOT suitable for long-term immersion in concentrated strong acids.
3. Reduction factor <1 for non-ferrous metals; sensing distance is significantly reduced for aluminium/copper targets, allow sufficient margin during selection.
4. Switching frequency only 100 Hz, not applicable for high-speed counting.
5. M12 4-pin male plug wiring: 茶色(+24V), 青(0V), 黒(PNP信号出力), 白 (unused).

🧩 Replacement References

同じシリーズ: IIT202 (8 検出距離mm, M30 hygienic type)

国内代替品: M30 flush stainless steel PNP NO inductive proximity sensor; verify 14 mm sensing distance and 0~100 ℃ temperature range.

📋 Troubleshooting Checklist

1. 信号がありません: Check if 24V power is supplied to brown and blue wires. Reverse polarity will not damage the sensor but causes no operation.
2. No output when target approaches: Check target material (distance reduction for Al/Cu); verify flush fit with mounting metal.
3. 誤ったトリガー: Metal debris on sensing face; poor shield grounding of cable.
4. Intermittent failure after hot washdown: Inspect plug sealing and ensure connector watertightness.

IFM IIT205 (IIB3014BBPKG/V4A/US-104) 応用事例

> Core selection criteria: Hygienic M30 flush, IP68/IP69K, 316L(V4A) ステンレス鋼, 0~100 ℃, compatible with CIP/SIP high-pressure cleaning, PNP いいえ, 14 mm flush sensing distance; 100 Hz スイッチング周波数, for static/low-speed position detection only, 高速計数には適していません.

場合 1: Beverage Filling Line – Spool Position Feedback for Filling Valves (Beer / Mineral Water / Dairy)

作業条件: Filling valves undergo CIP hot water + alkaline detergent high-pressure spray, wide temperature cycling from 0~95 ℃, humid mist environment.

関数: Mounted on hygienic pneumatic valve bodies to detect metal spool rod position. PLC confirms valve fully open / fully closed to prevent empty filling or overflow.

Why IIT205

1. IP69K withstands 80~100 bar high-pressure spray and Ecolab food-grade cleaners; 316L stainless steel housing without hygienic dead zones, flush installation prevents product residue buildup.
2. 0~100 ℃ withstands thermal shock; no signal drift during CIP hot cleaning.
3. 14 mm sensing distance accommodates spool stroke tolerance; flush mounting ensures valve body metal does not reduce detection range.

注意事項: For stainless steel spools, reduction factor =0.7, reserve sufficient effective sensing distance; only for position confirmation, not high-speed pulse counting.

場合 2: Metal Baffle / Metal Float Level Detection on Aseptic Tanks for Dairy Products

作業条件: Aseptic tanks for fresh milk/yogurt, periodic SIP steam sterilization, humid brackets on tank exterior, acid/alkaline cleaning cycles.

関数: Detect metal float to trigger high/low level alarms, start/stop feeding to prevent overflow or dry-run of tank.

重要なポイント: Sensor flush-recessed into stainless steel bracket, no hygienic dead corners; PEEK sensing face resistant to hot steam; M12 plug for quick disassembly during equipment cleaning.

場合 3: Metal Tray Presence Detection for Food Packaging Machines (Meat / Ready Meal Packaging Lines)

作業条件: Conveying stainless steel trays continuously; hot water washdown between stations, high humidity and splashing food debris.

関数: Verify stainless steel tray arrival; trigger sealing/vacuum forming upon detection; lock mold closing if no tray present to protect tooling.

Selection Benefits: Flush installation prevents damage from tray scraping; stainless steel housing resists food cleaning fluid corrosion; multi-directional yellow LED for status inspection after washdown.

場合 4: Hygienic Cylinder End-position Detection for Pharmaceutical Equipment (Tablet / Powder Production Lines)

作業条件: GMP cleanroom, actuators require periodic high-temperature disinfection and detergent rinsing; no grooves allowed to trap contaminants in clean areas.

関数: Installed at the end of hygienic cylinders to detect metal stop block on piston, feedback extend/retract end-position signal for interlocking of subsequent processes.

重要なポイント: Gold-plated contacts for stable operation in humid clean environments; 食べ物 & pharmaceutical hygienic compliance; M12 4-pin plug for fast spare part replacement.

場合 5: Metal Workpiece / Fixture Presence Confirmation for Meat Processing Cutting Lines

作業条件: High humidity, heavy foam and alkaline degreaser high-pressure washdown, wide ambient temperature fluctuation.

関数: Detect presence of stainless steel work fixture; lock cutting blade if fixture not in position to avoid collision and implement safety interlock.

制限事項: For aluminium fixtures, sensing distance reduced to 0.4 回; sufficient margin must be reserved during selection; not suitable for high-speed reciprocating motion.

場合 6: Metal Baking Tray Detection at Bakery Line Discharge

作業条件: Oven outlet, high ambient temperature up to nearly 100 ℃, oil-contaminated trays, high-pressure hot water cleaning per shift.

関数: Detect stainless steel baking trays arriving at unloading station to start/stop conveyor belt.

利点: Wide temperature range 0~100 ℃, oven residual heat will not damage sensor; IP69K allows direct washdown of grease; stainless steel housing resistant to oil corrosion.

❌ Non-suitable Applications (Pitfall Reminder)

1. High-speed counting, high-speed dynamic metal target detection: のみ 100 Hz スイッチング周波数, pulse loss occurs at high speed.
2. Long-term immersion in concentrated strong acids: only resistant to weak acid/alkaline rinsing, not continuous concentrated acid soaking.
3. Thin copper foil or thin aluminium sheet: heavy reduction of sensing distance, prone to misjudgement.
4. Installed near high-power inverters with strong magnetic/electromagnetic interference; shielded grounding required separately.

General Installation & 試運転ガイドライン (すべてのケースに適用可能)

1. Flush-recess into metal bracket, sensor head flush with metal surface.
2. Preferred target material: carbon steel, followed by 304/316 ステンレス鋼; calculate effective sensing distance in advance for aluminium/copper targets.
3. Use matching hygienic watertight M12 connectors; connector area is the highest failure point during washdown.
4. Perform CIP cleaning test after installation, check LED status to confirm no intermittent false triggering.

IFM IIT Series (M30 Hygienic Inductive Proximity Sensors) 機種一覧

> Series common features: M30×1.5 thread, V4A/316L stainless steel housing, IP68/IP69K, CIP/SIP washdown resistant, 0~100 ℃, M12 4-pin plug, 食べ物 & pharmaceutical hygienic grade; IIT205 is the flagship model of this series

Related IT Family (M8/M12/M18 hygienic sensors, same technology platform for reference selection)

IET Series: M8 hygienic (IET201)

IFT Series: M12 hygienic (IFT201, IFT259, IFT260)

IGT Series: M18 hygienic (IGT201, IGT204, IGT261, IGT262)

Series Selection Differentiation

1. IIT202 / IIT205 / IIT206: IIB prefix, PEEK sensing face, PEEK front face, 費用対効果の高い, highest volume in food industry; switching frequency 100Hz, only for static/low-speed position feedback, no IO-Link.
2. IIT228 / IIT244 / IIT245 / IIT246: IIK prefix, solid 316L metal sensing face, no PEEK plastic, superior chemical cleaning resistance; IIT244 supports IO-Link communication, real-time distance reading and remote NO/NC switching via PLC.
3. フラッシュマウント: Sensor head can be recessed in metal bracket, surrounding metal will not reduce sensing distance. Non-flush mount: Keep clearance, cannot be embedded in metal.

クイックセレクションガイド

Standard M30 hygienic position detection, 14 mm requirement: IIT205

Short range 8 mm: IIT202

IO-Link communication and remote parameter setting required: IIT244

Longer flush sensing distance 18 mm: IIT245

25 mm long range, non-flush installation acceptable: IIT246

補足事項

全モデル: 10~30VDC supply; M12 4-pin male plug; gold-plated contacts for high stability in humid washdown environments

Metal reduction factors: Steel=1, 316 stainless steel=0.7, Aluminium=0.4, Copper=0.3; calculate reduced range for Al/Cu targets during selection