ABB ACS580-01-087A-4 Variable Frequency Drive

The ACS580-01-087A-4 is a standard wall-mounted single drive unit ~에서 씨줄’s ACS580 series, rated for three-phase 380–480V AC input. This drive series features user-friendly operation, high reliability and superior energy efficiency as core advantages. Multiple standard built-in functions eliminate the need for extra optional components, enabling rapid commissioning and deployment. Widely compatible with general industrial loads such as pumps, 팬, conveyors and mixers, it is the preferred solution for light industry, 건물 HVAC, water treatment and other applications.

Breakdown of Model Code

Per ABB official naming convention, each segment of the model designation is defined as follows:

ACS580: 제품 시리즈 식별자, representing ABB’s general-purpose standard drive series covering power ratings from 0.75kW to 500kW

-01: Construction type, standing for wall-mounted standard single drive. Standard equipment includes IP21 enclosure rating, 보조 제어판, built-in Class C2 EMC filter, 세이프 토크 오프 (STO), braking chopper and triple-protection coated circuit boards

-087에이: Rated output current marking, indicating the nominal rated output current of the drive is 87A

-4: 전압 등급, denoting three-phase 380V–480V AC input, compatible with 50/60Hz mains power grids

핵심 기술 사양

전기 등급

매개변수	사양	비고
입력 전압 범위	3-phase AC 380V ~ 480V	Tolerance: +10% / -15%
입력 주파수	50/60헤르츠	Tolerance: ±5%
정격 출력 전류	87에이	Nominal value for light-duty applications
일치하는 모터 전력 (가벼운 의무)	45kW	가변 토크 부하용 (팬, 물 펌프)
일치하는 모터 전력 (헤비 듀티)	37kW	For constant-torque loads (운반, 혼입)
출력 주파수 범위	0 ~ 500Hz	Supports high-speed motor operation
Input Power Factor	≥0.98	High power factor across full power range
Overall Efficiency	≥98%	At rated operating conditions
과부하 용량	150% 60초 동안 정격 전류	One overload cycle permitted every 10 분
과부하 용량	110% rated current continuously	One overload cycle permitted every 10 분

제어 & 인터페이스 사양

Motor Control Modes: Scalar V/F control, 센서리스 벡터 제어; compatible with induction motors, permanent magnet synchronous motors and synchronous reluctance motors

물리적 크기 & 환경 사양

프레임 크기: R5

전체 치수 (H × W × D): 896mm × 345mm × 293mm

순중량: 대략. 23kg

인클로저 등급: IP21 (기준); IP55 high-protection version available as option

장착 유형: Wall mounting, side-by-side compact installation supported

작동 주변 온도: -15℃ ~ +50℃ (40℃ 이상에서는 디레이팅 필요)

저장 & Transport Temperature: -40℃ ~ +70℃

상대습도: 5% ~ 95%, 비응축

Altitude Rating: Full power output up to 1000m; 1% power derating per additional 100m above 1000m

HS코드: 85044088

표준 구성 & 옵션 액세서리

Factory Standard Equipment

ACS-AP-S Assistant Control Panel (Chinese language supported)
내장 클래스 C2 EMC 필터
Integrated Braking Chopper
세이프 토크 오프 (STO) 기능
Triple-protection Coated Printed Circuit Boards
Bottom Cable Entry Compartment
Multilingual Quick Installation & 시운전 매뉴얼

Common Optional Accessories

Enclosure Upgrade: IP55 protective enclosure, flange mounting kit

Communication Extensions: Fieldbus adapters including Profibus DP, Profinet IO, 이더넷/IP, 모드버스 TCP

Electrical Options: Input reactors, output reactors, du/dt filters, sine-wave filters, braking resistors

Functional Extensions: I/O expansion modules, temperature sensor interface cards, NETA-21 remote monitoring module

Software Tools: Drive Composer professional commissioning software

일반적인 애플리케이션 시나리오

수처리 산업: Clean water pumps, 하수 펌프, aeration fans, sludge mixers

HVAC 구축: 냉각수 펌프, cooling water pumps, supply & exhaust fans for central air conditioning

Light Manufacturing: 벨트 컨베이어, packaging production lines, 혼입 & blending equipment, 공기 압축기

야금 & 채광: Dust extraction fans, material transport belts, mine drainage pumps

도시공학: Water supply pumping stations, ventilation systems for wastewater treatment plants

Common Troubleshooting Matrix

결함 현상	근본 원인	Step-by-Step Remedial Actions
Overcurrent Trip (오류 코드 0001)	Short circuit in motor/cables, sudden load surge, overly short acceleration time	1. Cut power and test insulation & wiring of motor and power cables
		2. Appropriately extend acceleration time parameter
		3. Verify consistency between motor rated parameters and drive settings
DC Overvoltage Trip (오류 코드 0002)	Excessively high mains voltage, overly short deceleration time, faulty braking circuit	1. Measure input mains voltage to confirm it falls within allowable range
		2. Extend deceleration time or enable DC braking function
		3. Check wiring and resistance value of braking resistor for matching
저전압 트립 (오류 코드 0003)	Single-phase power loss, blown input fuses, excessively low mains voltage	1. Inspect three-phase input power to eliminate phase loss issues
		2. Check status of input fuses / 회로 차단기
		3. Confirm on-site mains voltage meets equipment requirements
Motor Overload Alarm (오류 코드 0005)	Jammed mechanical load, incorrect motor parameters, sustained overload operation	1. Cut power and rotate motor shaft manually to check mechanical smoothness
		2. Re-run motor identification auto-tune
		3. Evaluate actual load conditions and upsize drive model if necessary
과열 결함 (오류 코드 0009)	지나치게 높은 주변 온도, blocked cooling air ducts, faulty cooling fan	1. Clear dust buildup on drive air intake cooling grille
		2. Verify normal operation of cooling fan
		3. Improve cabinet ventilation and lower ambient temperature

Detailed List of Standard Accessories for ABB ACS580-01-087A-4 (Frame R5 / IP21 Version)

This model is a standard wall-mounted unit of ACS580 Frame R5. Factory supply contents are split into built-in onboard functions and physical accessories supplied in carton. Below is a detailed breakdown of the official standard supply scope:

Standard Built-in Onboard Functions (통합, No Extra Fitting Required)

All functions below are factory pre-configured and ready for direct use without purchasing extra options:

EMC Components: Built-in Class C2 EMC filter to meet industrial site electromagnetic compatibility requirements
Braking Circuit: Integrated braking chopper allowing direct connection of braking resistors for fast deceleration
안전 기능: 세이프 토크 오프 (STO) compliant with PL e / 실 3 safety level
환경 보호: Full triple-protection coating on control and power boards, resistant to humid, dusty and corrosive gas environments
Standard Control Interfaces: 6 디지털 입력, 2 디지털 출력, 2 아날로그 입력, 1 아날로그 출력
Basic Communications: Embedded RS-485 hardware port with native Modbus RTU protocol support
구조 설계: Bottom cable entry compartment supporting standardized wiring and cable ingress protection
Physical Standard Carton Accessories (Separately Packed Inside Shipment Box)

Independent accessories available upon unpacking for installation and basic commissioning:

ACS-AP-S Assistant Control Panel (Chinese version): Equipped with LCD screen and full-function keys for parameter setup, status monitoring and fault diagnosis; pluggable onto drive front panel and supplied in separate packaging
Wall Mounting Template: 1:1 paper drilling positioning template for marking mounting hole positions on-site to reduce drilling errors
Cable Junction Box Assembly: Standard for Frame R5 IP21 units, including power cable grounding brackets, control cable shielding clamps and assembly fasteners
Mounting Fastener Kit: M6 볼트, nuts and other metal hardware for wall mounting fixation
Ground Terminals & Cable Crimp Accessories: Dedicated main circuit grounding terminals and auxiliary crimp fittings for control terminals

III. Supplied Documentation & Identification Labels

Quick Installation and Startup Guide: Multilingual edition (중국어를 포함한) covering full procedures of wiring, power-up and basic commissioning
Safety Warning Stickers: Multilingual residual voltage warning labels to be affixed near equipment to alert maintenance personnel
Product Certificate of Conformity and Warranty Document

메모: Full hardware manuals and firmware parameter manuals are not supplied as standard; downloadable via ABB official website or available as separate printed copies upon order.