Hirschmann RS20-1600S2T1SDAUHC 산업용 이더넷 스위치

모델 세그먼트 정의

2. 핵심 사양표

기본 매개변수

포트 구성

전기적 특성

기계 & 환경적 특성

3. 액세서리 목록

표준 액세서리

1. RS20-1600S2T1SDAUHC switch main unit
2. Pre-installed DIN rail mounting clips
3. Pre-installed 6-pin power terminal block
4. User manual (하드 카피 / 전자 버전)
5. Product certification documents

옵션 액세서리

4. 경쟁자 & 브랜드 간 비교

동일 시리즈 비교 (Hirschmann RS20 Series)

브랜드 간 비교

5. 선택 지침 & 대체 솔루션

주요 선택 고려 사항

1. Port Type: Select uplink port type (단일/다중 모드 광섬유, RJ45) according to network topology; single-mode for long distance (>2킬로미터), multi-mode for short distance (<2킬로미터).
2. Software Function: 관리되지 않음 (유) for simple plug-and-play scenarios; Managed (E/P) for complex networks requiring VLAN, QoS, ring redundancy.
3. 온도 범위: 넓은 온도 모델 (시간) 야외용, high-temperature workshop and harsh environments; standard model for general indoor industrial sites.
4. 전력 요구 사항: Confirm whether dual power redundancy is needed to enhance system reliability.
5. 인증: Select products compliant with IEC 61850-3, UL 508, ISA 12.12.01 based on regional and industry standards.

권장 대체 모델

기술적 장점 요약

Fanless Design: 더 높은 신뢰성, 낮은 유지 관리 비용, suitable for dusty environments.

넓은 온도 범위: -40~+70℃ operating temperature, adaptable to harsh industrial conditions.

Plug-and-Play: Unmanaged design, no configuration needed, fast deployment.

Complete Industrial Certifications: IEC를 준수 61850-3, UL 508, ISA 12.12.01, ideal for power, 철도 운송 및 기타 산업.

컴팩트한 사이즈: 130mm width saves cabinet space and supports high-density installation.

How to Select Hirschmann Industrial Ethernet Switches According to Actual Requirements

Below is a standardized 7-step selection process applicable to engineering projects, together with series positioning, industry matching and common selection pitfalls.

단계 1: Confirm Mounting Method

Determine the product series directly:

1. DIN Rail Mount (Most control cabinets & automation production lines)

선택하다: RS20 / RS30 / RS40 compact series

2. 19-inch Rack Mount (Central control room & power distribution core cabinet)

선택하다: MACH100 / MACH4000 rack-mounted series

3. Outdoor Wall Mount / Cabinet-Free (Outdoor base station, tunnel, pumping station)

선택하다: OCTOPUS IP65/IP67 waterproof series

4. Panel Embedded Mount (Built-in equipment)

선택하다: EAGLE / dedicated panel type

단계 2: Confirm Port Quantity, Port Type & 속도

Total Port Quantity

Count PLC, HMI, instrument and camera quantities on site, 예약하다 20% 중복성.

흔한: 4-포트 / 8-포트 / 16-포트 / 24-포트.

Port Type (Core Selection Point)

RJ45 Copper Port: Indoor short distance ≤100m, standard network cable

Fiber Port: 장거리 & 강력한 간섭 방지

다중 모드 (MM): ≤2km, intra-factory & building interconnection, 저렴한 비용

단일 모드 (에스엠): ≥5~15km, cross-plant road, power remote transmission, 집 밖의

SFP Slot: Hot-pluggable Gigabit/100M fiber module, 유연한 확장; recommended for mid-to-high-end projects.

속도

Ordinary PLC, instrument & 모니터링: 10/100M Fast Ethernet is sufficient

Machine vision, big data, multi-camera & core aggregation: 풀 기가비트

단계 3: Select Management Mode

Three grades based on network complexity:

1. 관리되지 않음

특징: 플러그 앤 플레이, zero configuration

애플리케이션: Single device, simple production line, no network partition or ring redundancy

접미사: 유

2. Managed Lite

Supports VLAN, QoS, port rate limiting, basic ring network

애플리케이션: Multi-workshop partition, simple isolation & basic redundancy

3. Full Managed

Supports HIPER-Ring, MRP, RSTP, IGMP multicast, network security, port mirroring, 결함 경보

애플리케이션: 힘, 철도 운송, 스마트팩토리, ring topology, high reliability non-stop network

단계 4: Select Operating Temperature Grade

1. Standard Temperature: 0℃~+60℃

애플리케이션: Air-conditioned central control room, constant temperature cabinet

2. 넓은 온도: -40℃ ~ +70℃

애플리케이션: High-temperature workshop, 집 밖의, non-air-conditioned cabinet, cold northern & hot southern environments

Industrial sites are recommended to choose wide-temperature models for higher fault tolerance.

단계 5: Power Specification & 중복성

1. 전압: Industrial standard 24VDC, some support 12~48VDC wide voltage
2. Dual Power Redundancy: Mandatory for key production sections, power and rail transit; avoids network outage from single power failure
3. 보호: 역극성 보호 & surge immunity; prioritize industrial EMC protection for harsh power environments

단계 6: Network Redundancy & Special Application Requirements

1. Ring Network Self-healing (Network remains online when one cable breaks)

Must choose managed switches supporting HIPER-Ring / MRP / RSTP

2. Network segmentation & device isolation → Require VLAN
3. Multiple cameras & streaming media → Require IGMP multicast
4. Industrial security & unauthorized access prevention → Require port security & MAC binding

단계 7: 보호 등급 & 산업인증

1. 보호 등급

캐비닛 설치: Standard IP20

집 밖의, 무미 건조한 & humid site: IP65/IP67 OCTOPUS series

2. Industry-Specific Certification

전력산업: Mandatory IEC 61850-3

철도 운송: 안에 50155

선박 & 난바다 쪽으로 부는: Ship classification certification

Explosion-proof chemical industry: Explosion-proof grade certification

Hirschmann Main Series Positioning

Industry Recommended Selection

1. General Automation Production Line / Workshop

8/16-port RS20 wide-temperature unmanaged — cost-effective and sufficient

2. Multi-workshop Ring Network / 스마트팩토리

RS30 Gigabit SFP managed with ring network support

3. Power Substation / PV & 풍력

RS40 wide-temperature + IEC61850 certification + dual power redundancy

4. 철도 운송 / Tunnel Outdoor

OCTOPUS IP67 waterproof + 넓은 온도 + rail transit certification

5. Central Control Room Core Aggregation

MACH rack-mounted full Gigabit

Common Selection Pitfalls

1. Do not blindly choose full Gigabit; 100M is enough for ordinary PLC and wastes budget.
2. Avoid standard temperature models for industrial sites; cabinet overheating easily occurs in summer.
3. Use single-mode fiber ports for long-distance cross-plant connection; do not use network cables for long-distance laying.
4. Ring topology must use managed switches; unmanaged switches cannot implement ring redundancy.
5. Key equipment must adopt dual power redundancy to prevent entire network paralysis from single power failure.