Full Model Number: IFB3004BBPKG/M/V4A/US-104-DPS, Food-grade Hygienic M12 Flush-mount Inductive 근접 스위치
✅ 모델 코드 설명
IFT: IFM hygienic 유도 센서 시리즈
203: M12 스레드, 4 mm flush sensing distance, PNP 상시 개방, V4A stainless steel housing, M12 plug connection
시리즈 비교: IFT200 (플러시되지 않은, 7 mm, PNP 아니요); IFT201 (평상시 닫혀 있음)
📋 핵심 전기 사양
| 목 | 사양 |
| Rated sensing distance Sr | 4 mm (플러시 마운트); Effective operating range: 0~3.25 mm |
| 출력 유형 | DC PNP, 평상시 열림 (아니요) |
| 공급 전압 | 10~36 VDC |
| 맥스. 부하 전류 | 100 엄마 |
| 스위칭 주파수 | 800 헤르츠 |
| 전압 강하 | < 2.5 다섯 |
| 무부하 전류 | 10 mA @24VDC |
| 보호 | 역극성 보호, 펄스 단락 보호, 과부하 보호 |
| 히스테리시스 | 1~20% of rated sensing distance |
🛠️ Mechanical & 환경 데이터
몸: M12×1나사, 전체 길이 45 mm, V4A stainless steel housing (316엘)
연결: M12 4핀 수 커넥터
보호 등급: IP68 / IP69K, suitable for high-pressure COP/CIP washdown applications
작동 온도: 0 ~ +100 ℃, thermal shock resistant
무게: 27 g
|Target material reduction factor|Carbon steel=1; Stainless steel≈0.7; Brass≈0.5; Aluminum≈0.4; Copper≈0.3|
지시자: 노란색 LED, 4-side 90° visibility for switching status
📜 인증
CE, cULus, EAC, EC1935/2004, FDA, CCC; Compliant with food & beverage hygienic requirements
🎯 일반적인 응용 분야
Position detection and part counting of metal workpieces on food packaging, filling and pharmaceutical machinery; suitable for humid and high-pressure spray environments.
⚠️ 설치 참고사항
- 매립형 장착: Sensor face must be level with the metal mounting surface, no recess required;
- Minimum distance between adjacent sensors: ≥3×sensing distance (≥12 mm) 상호 간섭을 방지하기 위해;
- Metal target thickness ≥1 mm, target area ≥ twice the sensor sensing face;
- Use shielded M12 plug cables; ensure proper connector waterproofing in humid environments.
🔁 대체 선택 참조
- 같은 브랜드: IFT200 (플러시되지 않은,7 mm,PNP 아니요); IFT201 (M12 normally closed version)
- 국내 대안: M12 flush mount,4 mm,IP69K,316L 스테인레스 스틸,PNP NO inductive proximity switch (verify temperature rating and IP69K high-pressure wash capability)
🧩 Troubleshooting Checklist
출력 없음: Verify 10~36VDC supply, M12 pin assignment and polarity; check yellow LED status
잘못된 트리거링: Metal interference, 과도한 장착 간격, insufficient spacing between paired sensors
Intermittent failure after washdown: Inspect connector sealing and housing impact damage; IP69K rating only applies to front face washing, do not spray the connector joint directly
Domestic Alternatives for IFM IFT203
Matching criteria: M12, flush 4 mm, 316엘, IP68/IP69K, PNP 아니요, M12 4-pin male plug, 0~100℃, food washdown service
Core specs of IFT203: M12×1, flush mounted Sr=4 mm, PNP 아니요, 10~36VDC, IP68/IP69K, 316엘(V4A) 스테인레스 스틸, M12 4pin male connector, operating temperature 0~100℃, food hygienic grade, CIP/COP high-pressure cleaning compatible.
분류: 전체 경기 (Food-grade IP69K)、General economy grade (IP68, not for food washdown)
✅ Full Match Grade (Food/Pharmaceutical Spray Service, 직접 교체)
Suitable for food filling & pharmaceutical washdown, IP69K, 316L 스테인레스 스틸, resistant to acid/alkaline cleaners, max 100℃
- Meiji Sensor TPN-M1204P-F1
명세서: M12 flush buried mount,4 mm,PNP 아니요,M12 4-pin plug,316엘,IP68/IP69K,0~100℃,ceramic sensing face,resistant to food detergents
애플리케이션: CIP 고압 세척, IFT203 직접 교체; 원래와 동일한 스위칭 주파수 800Hz
- KJT KJT-M12-Z4PKG-V4A
명세서: M12 플러시 4 mm,PNP 아니요,M12 수 플러그,316엘,IP68/IP69K,0~100℃,위생적인 레이저 마킹,산 & 알칼리성 세척제 내성
비고: 국내 식품 기계에 널리 채택, IFM 표준과 호환되는 핀아웃
- 란바오 LR12XBF04DNOW (위생적인 세척 버전)
명세서: M12 매립형 플러시 4 mm,PNP 아니요,M12 4핀 커넥터,316L하우징,IP69K,0~100℃
비고: 국내 대표 브랜드, 포장/음료 장비 프로젝트 대량 배치
✅ 일반 이코노미 등급 (보통 습한 환경, IP68, 강산/알칼리성 고압 세척에는 권장되지 않습니다.)
일반 자동화용, 차가운 물 튀김; 고온 화학 CIP 세척에는 적합하지 않습니다.. 주택불이행 304, 316L 맞춤형, IP68 (IP69K 인증 없음)
- 샹롱 BB-M1204P-C11S12
명세서: M12 매립형 플러시 4 mm,PNP 아니요,M12 4-pin plug,10~36VDC,IP68
비고: 표준 금속 검출을 위한 최고의 비용 성능; 주택 불이행 304, 316L 맞춤형
- 소드론 IM12-04PO-V1
명세서: M12 매설 4 mm,PNP 아니요,M12 플러그,IP68,304 스테인레스 스틸,10~30VDC
비고: 오므론 OEM 시스템, 일반 습식 생산 라인 교체를 위한 우수한 안정성
- CNTD CJY12E-04PA-V1 (플러그 버전)
명세서: M12 매립형 플러시 4 mm PNP 아니요,M12 수 플러그,IP68,304 스테인레스 스틸
비고: 일반 자동화, 저렴한 가격, 최고 온도 70℃, 100℃ 서비스에는 적용되지 않습니다.
⚠️ 대체 선택의 중요한 위험
- IP69K 구별: 일반 국내 IP68 근접 센서는 IFT203을 대체할 수 없습니다.. 고압 세척 및 식품 산/알칼리성 세척 환경에는 IP69K 인증 모델이 필요합니다.; IP68은 침수 저항만 보장하며 고온 고압 스프레이를 견딜 수 없습니다..
- 소재별: 316엘(V4A) 대 304. 316식품/염수 세척 환경의 경우 L 필수; 304 산성 및 알칼리성 세척액에 부식됩니다..
- 온도: 많은 경제적인 모델의 최대 온도는 70℃이고 IFT203은 100℃에 도달합니다.. 고온 세척 애플리케이션의 온도 범위 확인.
- 금속 감소 계수: IFM IFT 시리즈는 Factor1 전체 금속 보상형입니다.. 대부분의 기존 가정용 근접 센서는 알루미늄/구리 대상에 대한 감지 거리 감쇠가 큽니다.. 알루미늄 공작물용, Factor1로 표시된 모델의 우선 순위를 지정합니다..
- 핀 할당: M12 4-pin plug. 교체 전 핀 정의 확인: 갈색(DC+), 파란색(DC-), 검은색(산출), 하얀색(여분의) 배선 손상을 방지하기 위해.
😀 교체 권장 사항
음식, 음료 및 의약품 CIP 세척: 메이지 TPN-M1204P-F1 / 첫 번째 선택으로 KJT KJT-M12-Z4PKG-V4A. 완전히 일치하는 매개변수, 보호 및 재료, 직접 드롭인 설치.
고온 화학 세척이 필요 없는 일반 장비, 차가운 물만 튀다: 명백한 비용 이점을 갖춘 Xiangrong BB-M1204P-C11S12.
IFM IFT203 설치 가이드 (위생 플러시 M12 근접 스위치)
애플리케이션: 식품/의약품 CIP 고압 세척; 매립형 장착, M12×1나사, 조임 토크 15 Nm
- 설치 전 준비
- 자재 확인: IFT203 센서 본체 + 316L 스테인리스 잠금 너트 2개 (공장 공급); M12 A 코드 4핀 암 케이블과 일치 (금도금 접점, IP69K 케이블)
- 도구: 토크 렌치, M12 소켓, 절연 도구; do not clamp PEEK sensing face with pipe wrench
- 환경검사: Confirm operating range 0~100℃; cleaning media compatible with PEEK face and 316L housing; keep away from strong magnetic fields (인버터, 모터, welders ≥30cm)
- Workpiece Confirmation: Metal target thickness ≥1 mm; metal area ≥ twice sensing face; material reduction: Carbon steel=1, Stainless steel≈0.7, Aluminum≈0.4
- 기계적 설치 절차 (플러시 마운트, 핵심 요구사항)
IFT203 is flush mount type: PEEK sensing end face must be fully level with metal mounting plate, no recess or protrusion allowed.
- Machine mounting hole: M12 threaded hole matching M12×1; hole face smooth and burr-free to prevent scratching PEEK sensing face
- Screw sensor body in, adjust position so sensing face aligns flush with equipment metal panel
- Lock with front and rear double nuts: 권장 토크 15 Nm. Over-torque will crack PEEK face, break housing seal and void IP69K rating.
- 장착 방향 (Critical for food washdown)
Horizontal mounting preferred; 수직 설치: M12 plug downward, prevents pooling of wash water and residue at connector
Avoid sensing face pointing upward horizontally, to prevent material buildup covering sensing surface
- Minimum spacing for multiple sensors
Side-by-side IFT203 installation: center distance ≥12 mm (3×Sn, Sn=4 mm) to avoid electromagnetic crosstalk and false triggering
Face-to-face paired installation: minimum gap between sensing faces ≥24 mm
- Metal margin of mounting plate: Keep ≥6 mm metal width around sensor to reduce magnetic distortion
- 전기 배선 (Power OFF Operation!)
M12 A-code 4-pin female plug, PNP 상시 열림
| 핀번호. | 케이블 색상 | 정의 |
| 1 | 갈색 | DC+ 10~36 VDC |
| 2 | 하얀색 | 여분의 (이 모델에는 사용되지 않음) |
| 3 | 파란색 | DC- 0다섯 |
| 4 | 검은색 | PNP 출력 (아니요) |
공급 범위: 10~36VDC. AC power supply strictly prohibited
PLC 입력: PNP signal connected to PLC input terminal, common point to 24V+
케이블 선택: IP69K M12 cable mandatory for food wash zones; connector O-ring intact; fully tightened plug required to maintain IP69K. Recheck connector torque after first commissioning.
보호: 역극성 내장, 단락 및 과부하 보호; wrong wiring may still cause damage.
- 시운전 단계
- Complete wiring with power cut, verify connector locking; energize system
- 감지면을 향해 금속 타겟을 이동합니다.:
Effective working distance: 0~3.24mm (Rated Sn=4 mm, 20% safety margin for temperature/voltage fluctuation compensation)
Yellow LED ON: Metal detected; LED 꺼짐: 금속 타겟 없음; 4-side LED visibility for convenient status observation from all angles
- Hysteresis characteristic: 1~20% hysteresis between pull-in and drop-out points, prevents signal jitter caused by vibration, normal behavior
- 시험: Repeated trigger test to confirm no random misoperation; perform spray test before formal CIP cleaning
- IP69K Wash Installation Specification (Food/Pharmaceutical Critical)
- High-pressure wash nozzle must not spray directly onto M12 connector joint, 스프레이 청소에는 센서 전면만 허용됩니다.
- 세정제: PEEK 감지면 및 316L 스테인리스 스틸과의 호환성 확인; 장기간 강산/알칼리 사용 시 정기적으로 하우징 검사
- 물개: 오래되거나 갈라진 O-링 교체; 여러 번 분해한 후 M12 케이블 교체 (O-링은 반복된 압축 후에 밀봉 성능을 잃습니다.)
- 전면 PEEK 감지면을 갈거나 충격을 주지 마십시오.; 긁힘으로 인해 잔여물이 쌓이게 됩니다., 위생 등급이 저하되고 감지 성능에 영향을 미칠 수 있음
- 설치 후 문제 해결
- 출력 없음, LED 꺼짐
공급 전압을 확인하세요, 갈색/파란 극성, M12 플러그 견고성 및 접촉 산화
- 잘못된 트리거링, LED는 금속 없이 무작위로 켜집니다.
센서 간격이 부족함, 근처의 금속이 너무 가깝습니다., 인버터 또는 병렬 전원 케이블의 간섭; 별도의 전원 케이블 및 센서 배선
- 목표물이 접근해도 반응 없음
장착 간격이 유효 작동 거리를 초과함; 타겟이 너무 얇거나 면적이 부족함; 특정 금속에 대한 큰 감쇠 (알류미늄)
- Intermittent failure after washdown
M12 플러그가 느슨함, 손상된 O-링, 습기 침투, IP 보호 상실
- 유지 & 안전
분해하기 전에 전원 끄기
정기 유지 보수: 감지면의 잔여 물질을 청소하십시오., 너트 토크 및 커넥터 밀봉을 확인하십시오.
기계적 충격과 망치질로 인해 PEEK 감지면이 손상됨; 설치 및 유지 관리 중 망치질 센서 금지
사용하지 않는 M12 포트에는 IP69K 먼지 밀봉 캡을 장착해야 합니다.
- 국내 교체 시 설치 비고
국내 위생 대안 (메이지 TPN-M1204P-F1 / KJT KJT-M12-Z4PKG-V4A) 동일한 설치 방법을 공유, 토크, 간격 및 핀 할당, 현장에서 교체 가능; 국내 센서의 실제 감지거리와 내화학성을 아직 검증 중.
접촉기,회로 차단기,감지기,인코더,PLC,변환기


















NH42-63-318x560.png)



