IFM IIT205 IFM Inductive Proximity Sensor

주문 코드: IIT205 (IIB3014BBPKG/V4A/US-104)

Hygienic M30 flush-mount inductive sensor, specially designed for food, beverage and pharmaceutical applications with cleaning cycles

✅ Key Specifications

전기 데이터

공급 전압: 10…30 V DC

산출: PNP 상시 개방 (아니요), 3-철사

Rated sensing distance Sn: 14 mm, flush mountable

Effective sensing range: 0～11.34 mm; tolerance ±10%

스위칭 주파수: 100 헤르츠

Continuous output current: 100 엄마

전압 강하: ≤2.5 V

No-load current: 10 mA@24VDC

보호: 역 극성 보호, pulsed short-circuit protection, 과부하 보호

Hysteresis: 1～20% Sr; switching point shift: -10～+10% Sr

Metal Reduction Factors (중요한)

Steel=1; Stainless steel=0.7; Brass=0.5; Aluminium=0.4; Copper=0.3

기계 & 환경 데이터

주택: M30×1.5, overall length L=50 mm

설치: 매립형 마운트

보호 등급: IP68 / IP69K (high-pressure washdown capable)

주변 온도: 0 … +100 ℃

무게: 103.9 g

하우징 재료: V4A stainless steel, gold-plated contacts, resistant to repeated exposure to cleaning agents

지시자: Multi-directional yellow LED for switching status

인증: CE, cULus, EAC, suitable for food industry

📌 Model Code Explanation

IIT205 = IIB3014BBPKG/V4A/US-104

II: Inductive sensor

비: Cylindrical threaded housing

30: M30 thread

14: Rated sensing distance 14 mm

비: 매립형 마운트

비: PNP 상시 개방

PKG: M12 4-pin plug connection

V4A: 스테인레스 스틸 하우징

US-104: Hygienic high-temperature version

🛠️ Application Fields

식품기계, filling lines, 제약 장비, washdown stations, metal target detection under frequent CIP/SIP high-pressure cleaning and high-humidity high-temperature conditions; suitable for level detection, metal workpiece presence check and cylinder position feedback.

⚠️ Selection & 설치 지침

1. 매립형 장착: The sensor face can be recessed into metal brackets; the surrounding metal of the mounting surface will not reduce the sensing distance.
2. 스테인레스 스틸 하우징 + IP69K rating, resistant to alkaline cleaners and hot high-pressure washdown; NOT suitable for long-term immersion in concentrated strong acids.
3. Reduction factor <1 for non-ferrous metals; sensing distance is significantly reduced for aluminium/copper targets, allow sufficient margin during selection.
4. Switching frequency only 100 헤르츠, not applicable for high-speed counting.
5. M12 4-pin male plug wiring: 갈색(+24다섯), 파란색(0다섯), 검은색(PNP signal output), 하얀색 (unused).

🧩 Replacement References

같은 시리즈: IIT202 (8 mm 감지 거리, M30 hygienic type)

국내 대안: M30 flush stainless steel PNP NO inductive proximity sensor; verify 14 mm sensing distance and 0~100 ℃ temperature range.

📋 Troubleshooting Checklist

1. 신호 없음: Check if 24V power is supplied to brown and blue wires. Reverse polarity will not damage the sensor but causes no operation.
2. No output when target approaches: Check target material (distance reduction for Al/Cu); verify flush fit with mounting metal.
3. 잘못된 트리거링: Metal debris on sensing face; poor shield grounding of cable.
4. Intermittent failure after hot washdown: Inspect plug sealing and ensure connector watertightness.

IFM IIT205 (IIB3014BBPKG/V4A/US-104) 적용사례

> Core selection criteria: Hygienic M30 flush, IP68/IP69K, 316엘(V4A) 스테인레스 스틸, 0~100 ℃, compatible with CIP/SIP high-pressure cleaning, PNP 아니요, 14 mm flush sensing distance; 100 Hz 스위칭 주파수, for static/low-speed position detection only, not for high-speed counting.

사례 1: Beverage Filling Line – Spool Position Feedback for Filling Valves (Beer / Mineral Water / Dairy)

Working Condition: Filling valves undergo CIP hot water + alkaline detergent high-pressure spray, wide temperature cycling from 0~95 ℃, humid mist environment.

기능: Mounted on hygienic pneumatic valve bodies to detect metal spool rod position. PLC confirms valve fully open / fully closed to prevent empty filling or overflow.

Why IIT205

1. IP69K withstands 80~100 bar high-pressure spray and Ecolab food-grade cleaners; 316L stainless steel housing without hygienic dead zones, flush installation prevents product residue buildup.
2. 0~100 ℃ withstands thermal shock; no signal drift during CIP hot cleaning.
3. 14 mm sensing distance accommodates spool stroke tolerance; flush mounting ensures valve body metal does not reduce detection range.

메모: For stainless steel spools, reduction factor =0.7, reserve sufficient effective sensing distance; only for position confirmation, not high-speed pulse counting.

사례 2: Metal Baffle / Metal Float Level Detection on Aseptic Tanks for Dairy Products

Working Condition: Aseptic tanks for fresh milk/yogurt, periodic SIP steam sterilization, humid brackets on tank exterior, acid/alkaline cleaning cycles.

기능: Detect metal float to trigger high/low level alarms, start/stop feeding to prevent overflow or dry-run of tank.

Key Points: Sensor flush-recessed into stainless steel bracket, no hygienic dead corners; PEEK sensing face resistant to hot steam; M12 plug for quick disassembly during equipment cleaning.

사례 3: Metal Tray Presence Detection for Food Packaging Machines (Meat / Ready Meal Packaging Lines)

Working Condition: Conveying stainless steel trays continuously; hot water washdown between stations, high humidity and splashing food debris.

기능: Verify stainless steel tray arrival; trigger sealing/vacuum forming upon detection; lock mold closing if no tray present to protect tooling.

Selection Benefits: Flush installation prevents damage from tray scraping; stainless steel housing resists food cleaning fluid corrosion; multi-directional yellow LED for status inspection after washdown.

사례 4: Hygienic Cylinder End-position Detection for Pharmaceutical Equipment (Tablet / Powder Production Lines)

Working Condition: GMP cleanroom, actuators require periodic high-temperature disinfection and detergent rinsing; no grooves allowed to trap contaminants in clean areas.

기능: Installed at the end of hygienic cylinders to detect metal stop block on piston, feedback extend/retract end-position signal for interlocking of subsequent processes.

Key Points: Gold-plated contacts for stable operation in humid clean environments; 음식 & pharmaceutical hygienic compliance; M12 4-pin plug for fast spare part replacement.

사례 5: Metal Workpiece / Fixture Presence Confirmation for Meat Processing Cutting Lines

Working Condition: 높은 습도, heavy foam and alkaline degreaser high-pressure washdown, wide ambient temperature fluctuation.

기능: Detect presence of stainless steel work fixture; lock cutting blade if fixture not in position to avoid collision and implement safety interlock.

제한사항: For aluminium fixtures, sensing distance reduced to 0.4 타임스; sufficient margin must be reserved during selection; not suitable for high-speed reciprocating motion.

사례 6: Metal Baking Tray Detection at Bakery Line Discharge

Working Condition: Oven outlet, high ambient temperature up to nearly 100 ℃, oil-contaminated trays, high-pressure hot water cleaning per shift.

기능: Detect stainless steel baking trays arriving at unloading station to start/stop conveyor belt.

이익: Wide temperature range 0~100 ℃, oven residual heat will not damage sensor; IP69K allows direct washdown of grease; stainless steel housing resistant to oil corrosion.

❌ Non-suitable Applications (Pitfall Reminder)

1. High-speed counting, high-speed dynamic metal target detection: 오직 100 Hz 스위칭 주파수, pulse loss occurs at high speed.
2. Long-term immersion in concentrated strong acids: only resistant to weak acid/alkaline rinsing, not continuous concentrated acid soaking.
3. Thin copper foil or thin aluminium sheet: heavy reduction of sensing distance, prone to misjudgement.
4. Installed near high-power inverters with strong magnetic/electromagnetic interference; shielded grounding required separately.

General Installation & 시운전 지침 (모든 경우에 적용 가능)

1. Flush-recess into metal bracket, sensor head flush with metal surface.
2. Preferred target material: carbon steel, followed by 304/316 스테인레스 스틸; calculate effective sensing distance in advance for aluminium/copper targets.
3. Use matching hygienic watertight M12 connectors; connector area is the highest failure point during washdown.
4. Perform CIP cleaning test after installation, check LED status to confirm no intermittent false triggering.

IFM IIT Series (M30 Hygienic Inductive Proximity Sensors) 모델 목록

> Series common features: M30×1.5 thread, V4A/316L stainless steel housing, IP68/IP69K, CIP/SIP washdown resistant, 0~100 ℃, M12 4-pin plug, 음식 & pharmaceutical hygienic grade; IIT205 is the flagship model of this series

Related IT Family (M8/M12/M18 hygienic sensors, same technology platform for reference selection)

IET Series: M8 hygienic (IET201)

IFT Series: M12 hygienic (IFT201, IFT259, IFT260)

IGT Series: M18 hygienic (IGT201, IGT204, IGT261, IGT262)

Series Selection Differentiation

1. IIT202 / IIT205 / IIT206: IIB prefix, PEEK sensing face, PEEK front face, 비용 효율적, highest volume in food industry; switching frequency 100Hz, only for static/low-speed position feedback, no IO-Link.
2. IIT228 / IIT244 / IIT245 / IIT246: IIK prefix, solid 316L metal sensing face, no PEEK plastic, superior chemical cleaning resistance; IIT244 supports IO-Link communication, real-time distance reading and remote NO/NC switching via PLC.
3. 매립형 마운트: Sensor head can be recessed in metal bracket, surrounding metal will not reduce sensing distance. Non-flush mount: Keep clearance, cannot be embedded in metal.

빠른 선택 가이드

Standard M30 hygienic position detection, 14 mm requirement: IIT205

Short range 8 mm: IIT202

IO-Link communication and remote parameter setting required: IIT244

Longer flush sensing distance 18 mm: IIT245

25 mm long range, non-flush installation acceptable: IIT246

보충 노트

All models: 10~30VDC supply; M12 4-pin male plug; gold-plated contacts for high stability in humid washdown environments

Metal reduction factors: Steel=1, 316 stainless steel=0.7, Aluminium=0.4, Copper=0.3; calculate reduced range for Al/Cu targets during selection